reddo

I have ECoS 50200 and for sure I can go into the menus and see the amp draw. All I want to see is the effect quickly on a display of putting certain DCC locos on the track and if the current increases. I have noted the recent issues with the Accurascale Class 37 motors (which I dont have) and would like to see if the same issues become inherent in the Class 92 which I do have with prolonged running and carbon build-up

Hello, does anyone know if there is an ammeter/voltmeter combo out there with digital display for DCC, similar to the DCCC Alpha Meter but at a far lower price. Cheers

If this was Jack Lane, is it the works that was taken over by Sulzer / Hawthorn Davey as I worked there in the late 1970s. I think the sitre has now been demolished and the Leeds Audi Centre sits on it...

Hello Vivian, this is most useful information thanks. I have a couple of Hornby Class 67s I plan to fit TTS into. I have found your YT channel, which is the best video to watch for setting up the CVs as you describe? Thanks Paul

Nigel - many thanks for the super detailed description, I had thought about 60% of it but your comments add alot of confidence so many thanks - greatly appreciated (I will be using my maglamp!) Thanks Paul for starting to reply - appreciated. I had ready some mixed reports on LaisDCC decoders so was rather nervous in ordering but seeing you're involved in the adptor board design, gave me some confidence. It seems that matching the current loading to locos was an issue so should be OK on this. I like the ESU ones - maybe next time :-)

Hi Paul I just purchased 4x of these adaptor boards from Digitrains and omitted to realise I will need to solder wires onto it from the pick-ups and motor onto the tiny PCB surface pads. Do you have any tips/recomendations how to do this as these are the smallest I have ever attempted ie have you done this? Thanks Paul

Thanks very much Stephen & Simon - it's given me some direction as you have highlighted the issues ie was it a type face or sign-written and how to apply to a dark background, plus what paper to use. many thanks. Its worth the effort as there will be at least 4 wagons and they are very distinctive.

Sorry if there is an obvious answer to this but...does anyone have an idea how to make up the brand lettering on this wagon eg print on self-adhesive paper, make up using transfer lettering etc. I am going to use 4x my Peco Shell/BP WW kits as they are pretty close with the cradle and side bar struts https://hmrs.org.uk/ind-coope-allsopp-burton-10t-beer-tank-no-22-op-1939-r3l-order-1441.html Thanks for any ideas

Came across this thread as putting together a Burton brewery related goods train - very interesting. My family came from Burton and GF lived on the Horninglow road. At 6-7 in the 60's I thought every town had railtracks acroos the streets like Burton ans my father would visit the great pubs on our seasonal holidays, the smell of the hops was great. I have vans and coal wagons but in a recent clip of Fitted Freight on the BFI series I noted they had Bass Tank wagons in their own cradles sat on flat wagons. Has anyone evr seen any kits of these? eg Parkside, Slaters etc I need to revisit the museum and spend a day there for a huge dose of nostalgia. Cheers

That's fantastic - thanks so much for posting. I also really do not like gradients at all so your affirmation to drop it in the scenery has given me the boost I needed - thanks. I just need to re-jig some boards/get the jigsaw out now. It really does look fabulous - best pics I have seen. Cheers

A casual Google search for Arkwright Models brought me to this thread which has been a nice trip down memory lane. I bought a Mainline J72 from him at a Train Fair around late 90's for £20 in lovely condition and have dug it out to compare to the new ones from Bachmann which I just placed an order for the LNER Lined Black version. The Mainline one is a lovely looking loco IMO and I need to give it a servicee and a run. The crazy prices for new items now are pulling the older stock and a similar J72 is on Ebay for £48 with a buffer missing albeit in VGC I would never have thought my time amassing parts and transfers at train fairs from the mid 90's onwards would pay off. All the Airfix kits I was picking up at a £1 each for cattle wagons, minerals and the like. Does anyone remember King Charles Models in King Charles Street Leeds, at the back of Schofields? Upstairs was the classic MR room with new and s/h stock in brown boxes to have a rummage through. Downstairs was all the lovely Tamiya kits which I could only dream of (but did buy when I started earning some money). It was taken over by Beatties, as many were, but it still kept an air of modelling. It was ironically a sad time when Beatties closed; I visited the Harrogate store and picked up a large Scalextric set (Le man 24hr with Porsche 962 IIRC) in the closing sale with my father for old times sake; he passed away later that year so it sits in my model room with great memories. Cheers

Sterling work and very inspirational. I am embarking on a far simpler effort (have neither the time or the commitment) using the Metcalfe Viaduct packs...I am now up to 1.8m long. They are a good enough impression for me and enjoyable to build which is half the battle I guess. One question...does your track rise up to this height or will you drop it into a scenic valley? I only ask as I have 2x sets of that Woodland Scenics riser and was thinking about using it. Cheers

Just a small addendum to all the good posts above. Having somewhat masochistic tendencies, I also like Fulgurex motors (I also have a mix of solenoids incl Peco, Hornby, Roco, Fleischmann) and Cobalt, which brings in additional fun (not) in which DCC decoders will do the respective job. I have an SMP Scaleway 36" radius point (copper clad) I built and am now installing using a Fx motor due to a) the baseboard frame being directly under the tie bar and b) its such a fine build it needs a sympathetic motor. So the reason I ended up here is how to wire the point which I can see from the v useful pic above and also the accessory terminals on FX. One observation I can make on the movement, is the design method does work but it needs the recommended 19-20mm distance on the rod from the motor drive bar to the pivot point and it needs to be installed initially with both the switchblades and the motor drive bar at dead centre so each swing sees the full movement. NB! there are also 2x holes in each end of the motor drive bar which allows options on the full swing radius. On installation, I did not cut the brass rod; I bent the first 20mm (and 5mm return) at right angles on the bench then fed it up through the pivot tube. The motor was installed on a ~30mm deep piece polystyrene packing (cut to the plan dims of the FX motor plate) and installed with screws which reduces the sound transmission a little (I am still trying to find another solution - glue?). At this point, remove the rod from the motor bar and lift it up high above the board which allows you to then go topside and bend the rod at 90 deg toward the tie bar hole and bend the final 3-4mm of rod into the tie bar hole - one needs a really good square pair of long-nosed pliers. They all worked on my Peco Finescale turnouts but the noise got to me and I was sold on the Cobalts (lower height than the Tortoise) but TBH not such a noise reduction as I was expecting. The BIG advantage of the FX motors is they can be positioned to a side of the location of the point tiebar which really helps, if like me, you have a track/baseboard conflict For control, having invested in ECoS 50200 and ESU Switchpilots, I have identified that the SP Extension units are the solution to providing the required relay signal to the FX motors; these plug into the side of the standard SwitchPilots and as I have now several FX motors spare, I will look at using them to drive some of my Ratio signals in a prototypical slo-mo action (hopefully) Apologies for the rambling and hope the above is of interest/help for anyone else landing on this thread. Cheers PS - I damaged one of the brass rods and after emailing FX, a lovely lady in Switzerland send me 2x spare free of charge PPS - If buying old units on Ebay, beware of models marked Pacific Fast Mail underneath in the black molding; these are old units for the US market and have issues, as advised by FX Switzerland

Thanks Stephen - very interesting indeed. I am looking at the pre-grouping era and pre-war LMS only. I also found a copy of C Hamilton Ellis' The Midland Railway book and whilst only A5 in size is very entertaining indeed with his views on the culture of the MR and its' directors.

Thanks Andy - I have send Falcon an email to enquire if they will reproduce it.

Apologies yes - it was the LMS 40t brake van. I guess one would have to scratch/kitbash to make one...the picture is in LMS Wagons Vol 1 Bob Essery. Thanks

Having just arrived on this thread from a Midland RM search, I am a little overwhelmed at the knowledge. Similar to Stephen, I have several kits from the 90s to build (MAJ and Ratio LMS coaches, Slaters, Parkside and Three Aitch LMS and Midland which I was picking up for a few £££s here and there. In preparation I made a bit of a Grand Tour of the UK over New Year and picked up several books on LMS and Midland mentioned in this thread from SH book shops (even one at the NRM - who knew?) and find the whole subject fascinating. I should say I have been an LNER follower for years, but having travelled as a child from Leeds to Burton in the early 60s, and distant but clear memories of Burton Station, its all rather close to home (my parents came from Burton and I assumed every town in England had as many railway crossings as BoT did! Anyway a couple of quick questions if I may: Who makes the most wagon kits for Midland - Slaters? Who provides the most Midland and LMS transfers? Who might make a kit of the Midland Brake vans 20t and 40t if poss Does anyone make the LMS 20T coke Hopper apart from Three Aitch Thanks in advance Paul

Having just arrived on this thread from a Midland RM search, I am a little overwhelmed at the knowledge. Similar to Stephen, I have several kits from the 90s to build (MJD and Ratio LMS coaches, Slaters, Parkside and Three Aitch LMS and Midland which I was picking up for a few £££s here and there. In preparation I made a bit of a Grand Tour of the UK over New Year and picked up several books on LMS and Midland mentioned in this thread from SH book shops (even one at the NRM - who knew?) and find the whole subject fascinating. I should say I have been an LNER follower for years, but having travelled as a child from Leeds to Burton in the early 60s, and distant but clear memories of Burton Station, its all rather close to home (my parents came from Burton and I assumed every town in England had as many railway crossings as BoT did! Anyway a couple of quick questions if I may: Who makes the most wagon kits for Midland - Slaters? Who provides the most Midland and LMS transfers? Who might make a kit of the Midland Brake vans 20t and 40t if poss Does anyone make the LMS 20T coke Hopper apart from Three Aitch Thanks in advance Paul

Many thanks John - greatly appreciated. I had also looked at the HMRS lining and wondered if there were any others so tha's fine now and I will go with them Many thanks Paul

Thanks Jonathan, I just sent him a message so hopefully he comes back. Cheers

I purchased this book many years ago and it is now coming into its own as I plan to build several of the Ratio kits (and the MAJ ones as well) In the Swan book they show several WM casting for the underframe eg vacuum tanks etc - does anyone know who manufactures this type of thing. Thanks for any information.

Great videos - thanks for sharing (I always try and recal where I was on these dates - this was a year into beingin a new job in Australia...) Charlie - do you yet have any launch dates for both 143 and 144 in Regional Railways livery - thanks. How to re-order?