Jump to content
 

LongRail

Members
 View Profile  See their activity

  • Posts

    1,100

  • Joined

  • Last visited

 Content Type 

Everything posted by LongRail

  1. LongRail
    For etched brass have a look at the PPD limited website, I am also looking to produce a caeprtic 4 and had the sides made of etched brass a few years ago but gave just made contact with York model making myself
  2. LongRail
    Use the end of a cocktail stick to pick from the middle
  3. LongRail
    Andy I assume the large double doors were supposed to slide sideways to open i which the beam at the top from which I assume they would be suspended would need to extend an equivalent distance either side of the opening
  4. LongRail
    Andy you should have brought one of those fold up plastic steps to save the tiling and lowering the mirror to be able to spend more time modelling never mind, next time
  5. LongRail
    Sod’s law always find something when you are not looking for it
  6. LongRail
    Watching the video I see you already have a train of full hoppers and one with a rake of empties
  7. LongRail
    Don’t want to do to the task but perhaps you need two train loads of wagons one full and one with empties going the other way
  8. LongRail
    Don’t want to do to the task but perhaps you need two train loads of wagons one full and one with empties going the other way
  9. LongRail
    Went to Deadman’s lane today unfortunately only to visit Etches Park depot not to see Micks layout
  10. LongRail
    Great video along with the virtual great electric train show video but still looking forward to seeing it in the flesh at some stage
  11. LongRail
    Thanks Merfyn shame would have been a nice one to model
  12. LongRail
    Merfyn, wonder if you can help there is a photo on facebook of what appears to be an ex railway bus the reg is JCH369K The body appears to have been painted in Railway Technical Centre colours would you happen to know if was every connected with the RTC and painted accordingly? https://www.flickr.com/photos/erfmania/48794371333/sizes/m/
  13. LongRail
    The little s**t imagine vandalising your nice new wagons
  14. LongRail
    Photo attached please also note the little brackets below the buffers need to be removed as well
  15. LongRail
    OO and N guage the steps are very very small
  16. LongRail
    Neal they print ok as N guage I was surprised that even the steps came out and are exceptionally fine and rather delicate I used my piercing saw to separate the component from the supports. I based the dimensions on the Oxford warwell for the main printed section they can be easily filled so I assume you can amend them. I will PM you
  17. LongRail
    Neal I will have a look and see if how some bits come out
  18. LongRail
    Last one had to upload as separate files although much less than 10Mb what a pain
  19. LongRail
    Completed model
  20. LongRail
    Latest project is crane KDS3149 this was mounted on a warwell wagon which was use by the S&T department and was classed as an equipment carrier and used for relay cabinets and the like. This is now used on the Mid Hants Railway albeit painted Green
  21. LongRail
    Zebedee is now finished with the addition of 3D printed steps, these were produced on new Resin Printer.
  22. LongRail
    As opposed to a cutting disk you should try a piercing saw next time
  23. LongRail
    Be careful the mug of tea doesn’t leave a ring on the river bed
  24. LongRail
    Nice to see the friction buffer stops modelled with track behind them so they can slide in the event of an impact and therefore absorb the impact. Did you install any of the additional Arrestors across the track beyond the buffer stops.
  25. LongRail
    On one of my bespoke buildings I had some 2mm MDF cut for me by a company
×
×
  • Create New...