Jump to content
 

GJB

Members
  • Posts

    40
  • Joined

  • Last visited

Everything posted by GJB

  1. A bit of activity at Thiseldoo. 5811 undertaking shunting duties. Auto coach and 14xx just about to depart. Mogul 6336 heads though at speed with a 4 coach suburban set. All three locos are Lionheart/Dapol, and as with the majority of my motive power stock they have been 'weathered' by the very talented David Magill (AKA Jinty). The pictures show clearly there are a lots of jobs yet to be done, groundwork/ballasting/population etc.........to mention a few!
  2. I have just noticed that the two photos just posted show quite clearly the 'high tech' method I use for point control. Wire in tube running along channels cut in the cork track bed, with bike spoke holders (?) soldered to the end! Polarity is changed by the switches on the control panel, rather than depending on switchblade contact. Gerry
  3. Hi F-UnitMad I agree regarding the necessary compromise between height and width. I could have got a little more width by lowering the baseboards, which in turn would have allowed me to have a higher backscene. However I went for a comfortable working height which gave me the 9ft width. I must say that any achievement is really down to Richard Webster of Lionheart (now Lionheart/Dapol). Had it not been for his reassurances regarding the ability of his models to run around R2 curves I think I may still be working in a smaller gauge. The longest stock I run consists of a Lionheart 43xx along with a 4 coach suburban set, again from Lionheart. I am hoping to post a short video if my wife will show me how to use her iPad. It has to be said that when running round the curves at either end the buffers are compressed but there is no buffer locking. Add to that the fact that standing on the inside of the curve any overhang of the coach bodies is on the opposite side and therefore not too noticeable. Overall the image conveyed is not to bad, and as the name implies - Thisledoo, and it certainly does for me. The trees are by MBR models in Poland. I think the ones I am using are actually for 00 gauge. They do produce larger versions but with a backscene of 7" they would, in my opinion, overpower the layout. They are first class! Gerry
  4. Hi Steve, Thank you for the very kind comments. My intention from the start was to attempt to achieve an 'uncluttered look' and to portray a feeling of space. Some years ago I remember somebody, I think it may have been Iain Rice, saying that ideally a layout should be able to accommodate the length of a train three times over in order to look realistic. That is what I have managed to do by taking the track round the back of the chimney breast. Gerry
  5. Hi Craig, Thanks for the very kind words of encouragement, much appreciated. I'm afraid there never was a track plan, but I will attempt to draw one and post it along with the salient measurements. I have got a couple more photos from when the layout was being built which shows quite clearly the track layout, which should help. Gerry
  6. A couple more photos which were taken as the layout was being built. A before and after view showing one end of the layout as the track runs from the station area on the left as viewed, around the curve and into the fiddle yard on the right. More trees have been added since the second photo was taken, and I have yet to complete some fine detail work. Please excuse the mess!! Gerry
  7. Hi Nearholmer, Thanks for the kind remarks, much appreciated. The loft space available for use is 9ft wide by 26ft long. Unfortunately there is only enough room for a 7" deep backscene along the main baseboard. To achieve anything deeper would have meant reducing the minimum radius at the ends even further. Gerry
  8. Hi Woodyfox, Thanks for the comment. I must admit that the name really does fits my modelling style quite well. Both the layout and its builder are very much on the same wavelength. Gerry
  9. Hi Felix, Thanks for the encouraging comment regarding the scenery on the corner section. That particular corner takes the track around the top end of the available loft space and into the fiddle yard on the other side of the loft. If I can get my wife to show me how to work the video on her iPad I intend to try posting a short video showing a 43xx heading the Lionheart 4 coach set. If nothing else it shows that decent length trains can be run without looking silly on minimum radius curves (4ft 3" in my case) especially if you are viewing from inside the curve of the track. As for having a picnic, in the fullness of time I shall populate one of the fields in that area with a few of the excellent Pendon Collection figures from Modelu to bring a bit of life to the area. Gerry
  10. Hi Father Dougal, It is certainly fun to operate, and gives me much enjoyment - what more can you ask of a trainset. The layout does not take itself too seriously, as it's name suggests, which is what appeals to me. Gerry
  11. After spending more years than I care to remember modelling in N gauge, OO gauge, EM gauge and then back to N gauge, I finally moved over to 7mm. This came about following a conversation with Richard Webster, (then Lionheart) who convinced me I could run the 7mm locomotives he produced around the available space in my loft, which meant running around a minimum radius of 4ft 3". Having purchased my first loco a start was made on getting some track laid. Initially the idea was to build a branch line terminus to fiddle yard utilising two sides and one end of the loft. However the track plan was eventually modified into a through station using both sides and both ends of the loft after the purchase of a couple of Lionheart 43xx Moguls. This explains the presence of an engine shed on the layout. This layout makes no claim to being an authentic representation of a real railway - it is in effect my train set. The buildings are from Invertrain (Station building), Skytrex (Goods shed, Engine shed and various other bits) and Peco (Signal box). Track is Peco throughout. Loco and coaching stock are Lionheart/Dapol and most of the wagons are Slaters kits. There is still much to do, ballasting being the next task to be undertaken. The Engine shed, Goods shed and other scenic bits at the front of the layout were built on their own sub-base to allow them to be moved when I got round to doing the ballast and point rodding. The name came about when I thought "This will do me" after I had finished the trackwork. Anyway - a few photos of my train set! Gerry
  12. Thanks Grahame, finally managed to get one ordered. Best of luck with the project. Regards Gerry
  13. They are coming along nicely Ade. Looking good! Regards Gerry
  14. Hi Ade, Thanks for the advice on bending the running boards, very much appreciated. You really are making good progress and I shall continuing watching with interest. Regards Gerry
  15. Hi Ade, have been following this build with interest. Can you tell me how you went about bending the running boards, please? Regards Gerry
  16. GJB

    Bala Town

    It's looking good, Andy. Gerry
  17. GJB

    Bala Town

    Thanks Andy, much appreciated. Gerry
  18. GJB

    Bala Town

    Looking very good. Where did the stone walling come from Andy? Gerry
  19. GJB

    Bala Town

    Coming along nicely Andy, very impressive. Gerry
  20. Excellent work Andy, it really does bring the area to life. Will be following progress with interest. Gerry
  21. It may be quite unremarkable - BUT it is very atmospheric and understated. A first class piece of modelling. Gerry
  22. GJB

    Bala Town

    Hi Andy, I have found your 7mm work to be inspiring, so am looking forward with great interest to seeing this latest project develop. Gerry
  23. Thanks, much appreciated. Gerry
×
×
  • Create New...