Jump to content
 

skip37216

Members
  • Posts

    41
  • Joined

  • Last visited

Recent Profile Visitors

146 profile views

skip37216's Achievements

1

Reputation

  1. I have just aquired a DR5000 and it works perfectly with my Lenz equipment using the xpressnet but can anyone recommend a Android app please.
  2. Hi Ken Loksound 4.0 XL has 12 function outlets and following Nigel's advice I have managed to program the independant rear lights and cab lights on my new Warship exactly as I wanted rather than as Heljan delivered. regards Norman
  3. Hi Nigel Success - thank you for your advice. regards Norman
  4. Hi Nigel Thanks for your advice and help and I believe I understand now. I'll have another go. regards Norman
  5. Hi Ken I am trying to use Aux1 and Aux2 to control my rear lights - easy enough but not if you want each rear light to only operate in one direction. This is fairly simple with Zimo. In that way only one function key operates both rear lights and the directional control is automatic. I also want Aux3 & 4 to operate the cab lights but I want the lights to extinguish automatically when the loco moves. I can't see how to do this with ESU but easy enough with Zimo. regards Norman
  6. Hi Nigel Yes the layout of Decoderpro is claimed to be similar to the Lokprogrammer but it is not as comprehensive. For instance ESU treats each function as two in that one is forward and the other in reverse but not in decoderpro. Norman
  7. Hi Ken OK so it is possible. I am using DecoderPro but that does not help. I have set Aux 1 and 2 to operate as headlights or so I thought but to no avail. I do somewhere have an early ESU programmer but I'm pretty sure its out of date. It should be possible via setting CVs directly. Regards Norman
  8. Is it possible to adjust an ESU Loksound (4.0) to A) Make a function switch on only in one direction like in F0? B) Make a function switch on when stationary and off when moving? Any suggestions appreciated please. Norman
  9. I can't fault Bob's logic maybe Heljan think we are all stupid. My EWS 60 suffered the black marks both ends but no damage and they managed to swap the DIL switches 3 with 4 and again easily rectified but what ever happened to Heljan policy of "right first time"? As to their declared policy on the load haul cockup it beggars belief that they could be so crass. A positive first step in apologising and offering money back but anyone who has bought a Load Haul 60 i'm sure does not want an apology and their money back but would much prefer for Heljan to man up, take responsibility and put it right. Regards Norman
  10. Hi I reported the problem and had a response so I'm sure Dapol will resolve the issue on later production.. Rather than send the loco back it's easy to just remove the suppressor board and the problem is no more
  11. Hi Paul I have just removed the small suppressor board which is located (lodged) underneath the main DCC socket board. A tad on the Heath Robinson side, Dapol are relying on the wires keeping this board in place and it obviously did not quite do the job. Now that I have removed the resistor board she works perfectly. I just wired the motor directly to the DCC board eliminating the suppressors a very neat solution. There must have been some transient effect maybe which killed the power to the motor. Thanks for your help.
  12. Hi Paul There must be a logical explanation - that's what I mean by not fantasy. I've just spoken with Digitrains and they suggested removing the suppressors so I'll give that a go and let you know if that has any effect. To answer the other possibilities: There is no overheating - the decoder remains cold. Switching the sound off and switching the fireglow off has no effect. I turned the sound down to 20 and that had no effect.
  13. Hi Paul I don't go along with fantasy and there must be a logical explanation for the fault I am experiencing. It's hardly rocket science or some secret witch doctory effect. As for the F key I don't see the relevance but the firebox is on F13 and its also on random - very effective using two LEDs I would very much appreciate any sensible suggestions to investigate - it's driving me nuts!
  14. Hello Paul From a good source - Digitrains. Are you suggesting that somehow there can be a combination of decoder and loco that will exhibit a fault?
  15. My Dapol Terrier runs fine on analogue straight out of the box. But with a Zimo MX644D (21 pin) installed I have a mysterious problem. In reverse only it runs and then stops for maybe 2 to 4 seconds then starts off again only to stop again after a short while and so on. When the loco stops the background sounds continue and the firebox still glows so it is not a pickup problem. In forward direction it works perfectly. I have tested the decoder separately on my ESU test rig and it performs faultlessly. I have tested the loco on 12 volt analogue with and without the chip fitted and again it is perfect. This defies any logic - I do not perceive any mechanical problems - the decoder works on the ESU test rig and the loco runs fine with the decoder fitted on DC. I am missing something but do not know what else I can check. I thought there could be contact between the underside of the decoder and the loco wiring board but I inserted a slip of paper between and eliminated that as a possibility. I have double checked the wiring between the board and the motor. I have tried it on 14, 27,28 and 128 speeds steps just to eliminate a possibility. I have fitted the default capacitor that comes with the decoder but have not tested without this. Any sensible suggestions will be appreciated?
×
×
  • Create New...