Steveh145

I received mine on wednesday, one of the BS pair and one vtg pair, very impressed with the level of detail and seems a shame they are going to have to be weathered haha, really good packaging as well, keep up the good work Accurascale. Steve

Hi Matt, Another location which maybe worth having a look at on google earth is Earles sidings, trains coming from the Manchester end have to reverse in off the mainline (Manchester-Sheffield) into the exchange sidings, my friend who is a Northern driver gets stuck behind it sometimes waiting for it to reverse in.

Hi Dave, The other thing I forgot too mention was that also the marker lights do not change with the direction neither, which I realise they will not as we now know there is a wiring issue, So do you know if its the whole batch or just a few and do you have any of this model left that is not affected as I would like to exchange? regards Steve

Yes it seems odd, both my 66/0 & 66/5 work fine but just this 66/6 does not seem to work as per the others and all the switches are the same on all 3 locos and I have used hattons 21 pin 6 function decoders on all 3 and have swapped a couple around to make sure it is not a duff decoder, hopefully (Hattons Dave) would be able to test a dcc fitted one and let us know if this is just our locos or a faulty batch.

Hi Dave, function 0 only turns on the top marker light, and according to the instructions all the switches are as they should be, this is the second loco I have had that has had this issue (same model), just double checked and 0 only turns top marker light on, functions 1/2 tail lights and 3/4 other marker lights? Not sure whether there is an issue with this batch of loco regarding the lighting? When I sent this back last time I did state it in my covering letter, would you be able to confirm before I return this for an exchange if there is an issue or I have been unlucky? regards Steve

Hi Dave, thanks for the reply it seems strange that it is only on this variant, as the 66/5 and 66/0 all 3 marker lights work as per prototype, also maybe worth checking your dcc fitted one as when I fit a decoder (your own product) 0 does not switch on as per others? Regards Steve

Would imagine the manufacturer has to take them back but not sure Or they may sell them off but would imagine Hattons will not be to happy if theres loads being sent back, the one thing I will say and it has been said before on this thread, the customer service is excellent.

Evening all, does anyone have the 66/6 variant and if yes have you noticed only one of the marker lights works? This is the 3rd one I have had due to issues and when I have ran in on dc on a rolling road before installing a decoder once again only one of the marker lights works? Not sure if it is just this model? (66621) if anyone has noticed this? regards Steve

Thanks Srman for your help regarding this, I have contacted Hattons and they are going to send a replacement so hopefully I will not have the same problems.

Haha, its an unhealthy sound if it is. Thanks Srman, is that the same with a 6 pin as well then as it is a 6 pin decoder?

Hi Andy, not according to the manufacturers instructions regarding pin 1 on the decoder and on the model itself, I also followed a youtube vid as the body is a pain to get off with all the pipes that need to be disconected. Its weird how it only started to hum as I pressed F0?

Thanks, the lights seem to just permeanently stay on regardless of pressing F0, and after trying it again today I have a feeling there must be a fault/short as it has fried my decoder

Hi all, I have recently purchased a class 07 (HNRC) version and have fitted a guagemaster dcc23 decoder and all is working fine, Does anyone know if the lights are meant to stay on all the time regardless of using 0 on most other locos to turn the lights off and on? Also if I do press 0 as you would to turn lights on or off there is a faint humming sound?