Hi Mark,

Yes, stairs can be a bit of a pain when nothing available suites, Plastruct as Alan pointed out is about the best available and I use by the ton load and used it here on this building along with microstrip to form the handrails.

Plastruct also do Handrials both stright and sloping/angled.

If I am to construct stairs from scratch: I lookat what the width of the stairs need to be and cut a strip to that width 20/ 30 thou plasticard then cut strips off it at the width determined by the angle of the stair sides say for example 4mm, If you look at my signal box thread I have a stage by stage photo images showing how this is achieved from start to finish.

cheers

Peter