Jump to content
 

Defford

Members
  • Posts

    22
  • Joined

  • Last visited

Everything posted by Defford

  1. Hi Paul. I've just replied to your PM re. the buildings. Yes, I recognise the track plan. Interchangeable scenery is a novel idea! Yes, I'd come across those before. Farish do a model of a Fairburn 2-6-4T which I think is the prototype shown here, so adding one of those to the fleet is a possibility. There's a bit of discussion about that somewhere on the thread. I haven't decided whether to modify my layout to add it yet. Your replies have reminded me that I should post an update on here soon - I haven't done for ages but the layout is progressing.
  2. Thanks David. Must have been interesting to visit Kyle after that length of time. I'm sure it was hard work, but alternating trips to Kyle and Mallaig sounds like it could have its rewards. Not sure if you were ever at Kyle while freight operations were still going on but I got sent this link the other day - the last 45 seconds shows some rail to ship transfers going on: https://www.facebook.com/groups/1773455772921291/permalink/2432299610370234/ Building a model crane is on the to-do list for the layout. A working model would be a challenge!
  3. Thanks for that David. Yes, Kyle station is a shadow of its former self in some ways but at least it's still there. Your timing is spot on as I've been meaning to post an update. I bought 'Rails to Kyle of Lochalsh' by David McConnell recently and it seems a few different writers thought the station building 'commodious' when the line first opened (there's a word you don't see any more!) My slightly less commodious version of it is nearly done - some tidying up to do and details to add but the structure it more or less complete: Chimneys, flashing, signage and posters to add next. Meanwhile, some trees have sprung up near the loch: These are a mix of Woodland Scenics 'Ready Made Value Pack' trees and some pricier birches from themodeltreeshop.co.uk. The WS trees looked a bit naff straight out of the box but work quite well when you group several together. Need to add some pines for a more Scottish look I think. Adrian.
  4. Thanks all for helping me out. Sounds like it's most probably D282 and certainly one of the shorter Gresley brake vans. Great picture, thanks. There's more variety on the Kyle line than I had thought. I suppose the general pool of BR vehicles spread over the country as time went on.
  5. Aha, thanks Chris. I'm not familiar with LNER designs. Kyle line photos from this era tend to feature ex-LMS or BR stock. Seems like it might be the luggage brake van described on this page: https://www.steve-banks.org/prototype-and-traffic/279-lner-npcs-61-6-thompson-deal-bg
  6. Hi all, I've just purchased the print below, probably taken in the early 1960s. It's evidently a type 2 at Kyle of Lochalsh with a mixed parcel/passenger train but does anyone know what type of vehicle is coupled directly behind the loco? Adrian.
  7. Thanks again for the positive comments. The station building is taking shape. This is to be a half relief model against the back scene. Same technique as the engine shed - drawing up sections of wall (in FreeCAD), 3D printing them, painting, cladding in plastikard (will be 2mm planking in this case) and assembling as a kit of parts. Here's a screenshot of one of the wall sections in FreeCAD: It's roughly to scale - about 450mm long in all. I've now printed all 8 sections and glued plasticard internal walls/roof supports: Still the roof, canopy, doors and other details to do and I'm also wondering what colour scheme to paint it in. It seems to have been two-tone green and cream/brown in the past but I'm not sure of dates. Favouring cream/brown at the moment to match the signal box. Adrian.
  8. Thanks Pete. The more I think about it the more I like the idea of a sort of 'Kyle through time' concept. (i shan't be demolishing the engine shed though!)
  9. Hi all, It's been a long time since I last posted but progress on the layout has been slow lately. Still, I have just finished the side office for the engine shed which is now complete except for smoke vents. As per the main body of the shed, I've used a 3D-printed 'kit of parts' approach: These pieces get clad in embossed plastikard with etched brass windows sandwiched between layers plus some filler around inevitable gaps. The stonework then gets painted with acrylics before assembly and addition of roof and chimneys. Here's the end result: I have also added limited clearance warning signs (which applies to the model as much as the real thing!) and soot marks above the door openings. A wider angle shot with a Black 5 on shed: It's a long-winded method but it works. Planning to do the station building in a similar way. Meanwhile I have reworked the hills on a section of back scene - an improvement but think I need to tone down the greens a bit: I couldn't resist buying another 'wrong era' loco that came up on ebay . This time a Farish class 24 in blue. It's a good runner and looks the part. Finally here's an experiment with evening light with a type 2 shunting on the pier: Hope you enjoy, Adrian.
  10. Cheers Pete. The Farish 37 is a very nice model so it is tempting, if financially ruinous, to imagine a 'multi-era' layout! Not out of the question though... I've noticed the observation car on the Farish website too - a bit pricey but I suppose it's something of a niche. I'd actually like to find or build a model of the 'Devon Belle' vehicle that was used on the line in the 50/60s but not sure where to start with that idea.
  11. Hi all, hope you're keeping well. Progress has slowed recently (busy home-working, for the time being at least), but have been painting hills on the back scene: You will note the surprising appearance of a class 37 that appears to have travelled back in time to 1960. Of course it's the wrong era for this layout, but a 'Highlander' Farish set came up on eBay at the end of last year and I couldn't resist the chance to buy something specific to the Kyle Line (even if the box refers to it as the 'Far North Line' ). Will probably run occasionally for variety. The Loco and coaches are very nicely done and the supplied DCC decoder seems to be high quality. I'm liking the high intensity headlight - photographed below with side-lighting for a sunset effect(!): Also, just a note about the cassette system I have in case it's of interest. I'm using various lengths of aluminum angle with some 3D printed brackets I devised. These space the inner edges of the angle at 9mm and make for a kind of 'cradle' to carry the rakes in. This one's 500mm long: Longest one I have is 1 metre and uses 4 brackets - lifting that and turning it around is a dubious undertaking - but generally it works well. The bracket is sized so that the height of the 'rail head' matches that of Peco code 80 when placed on the same level. The cassette board has a couple of guides and some sprung clips to provide electrical contact: All the best, Adrian.
  12. You're too kind! Thanks again. I am pleased with the water effect and have a couple of sailing boats on order to complete the scene. I hadn't but they look smart, if fiddly. It would be good to have some hands-free shunting on the pier. How much re-engineering does it take to convert a standard Peco wagon for instance?
  13. Evening all. Lock down is proving quite productive on the modelling front. I've made headway on the loch side board - overview below: And a couple of arty shots: 45205 brings in the mixed freight Followed by D5307 with the morning passenger working I'll be adding some more scrub, greenery and a scattering of boulders to the headland plus perhaps a few small trees. A couple of small sailing boats in the bay might look good too. I'm also looking for a way of doing a post and wire fence. Anyone got any tips for N/2mm scale? Meanwhile, thought I'd upload the track plan (still looking to add the coal siding at some point): The tapering of the loch board and the hidden 90 deg bend were part of a cunning plan to fit the layout around the side of a computer desk! Seems to have worked out. All the best, Adrian.
  14. Hi all. Thanks for the further comments and information. I hope you're having a reasonable Good Friday in the circumstances. Cheers Alasdair. I'm modelling out of historical interest rather than memory and in fact only came to know the Kyle line in the early 2000s so these anecdotes and details are welcome. I guess the shed had been demolished by '77. Did you ever get a ride in an observation coach? Noted re. the snow ploughs. I may paint them, then again I quite like the yellow! Thanks, I'll look it up. Looking at your blog again, I've just realised your father wrote 'The Dingwall and Skye Railway' - my compliments on a good read. Now a quick update. I've spent a bit of time this week tackling some scenic work on the lochside board. The outcrops are lumps of DAS clay shaped by hand then prodded with a blunt blade. I may add some more height to the rock face on this section. I've given them an acrylic wash and some dry brushing. The sea is a mix of acrylics and will be given a few layers of PVA for a calm or gently rippled effect. I've also begun on the embankment. This is Woodland Scenics 'Talus' (medium and coarse grades) held in place with Deluxe Tacky Glue. The larger rocks are perhaps slightly out of scale but overall the effect works for me. There's actually a big size difference between medium and coarse and it took a bit of sorting to find the smallest of the latter. The stuff also sounds a bit like fingernails on a blackboard when you handle it! Think I'll sprinkle on some ballast to cover the gaps. Nearer the line will be some fencing and a bit of greenery. The bridge also needs some tubular guard rails...
  15. This is great info. Thank you. Interesting. Seems that steam infrastructure was improved just in time for Diesel! I think I'm going to have to add that coaling spur. Yes, they make an interesting feature. Another job (or two) goes on the list.
  16. Thanks chaps! No Turner prize yet but I like the way this hobby gets you trying different things... Cheers Mark. I have seen that picture before and my earlier photo was a sort of reconstruction effort. Am Baile is a good resource. Great blog and layout you've got there. That tandem point looks the business as do the water towers. I will have to have a proper read some time. I was actually pondering making a start on the coaling platform which looks a quite a rickety affair. That got me wondering how locos were actually coaled at Kyle - buckets and shovels or a crane...? Also, I realised a little while ago that the LMS added a turnout to one of the engine shed roads to give a short coal wagon siding which I haven't included on my version: Translated to my layout, that would look like this (new bit in orange box): Hmmm...it would fit and I even have a spare turnout. Disruptive but worth it?
  17. Some limited progress to report. I have made headway on the third and final section of backscene (although none are complete yet). I've used 3mm ply with white undercoat and then a mix of acrylics on top to produce something like a sky. Not being any kind of painter, this was a bit hit and miss. It's perhaps a bit 'busy' in parts but I'm happy with the effect overall: I will eventually have a stab at painting the distant hills of Wester Ross to complete the scene. Meanwhile, here's series of images following D5326 that give further impressions of the layout: Arriving with the morning service from Inverness. Idling on shed for a time (the shed is still missing its side office :-( ) Heading back out for the late morning departure. Getting the return leg up to speed through the cutting. Well on the the way to Plockton. And for steam fans, here's 45206 approaching Kyle with a rake of Stanier Crimson and Cream: Hope you are all well. Adrian.
  18. Thanks all for the kind words and likes. I will certainly keep posting as things progress. Much obliged Pete - I will check that out. Thanks Scott. Good to here from another fan of the Kyle Line. I have the John Thomas book and can also recommend 'The Dingwall & Skye Railway' by Peter Tatlow if you don't already have it. A good read with many photos, large scale maps and some scale drawings. The Stromeferry project sounds interesting...you could perhaps include the cement silos that were installed for a short time in the 1970s if that's your scene.
  19. Cheers Kris. I'm envious of the trackwork on your Coombe Viaduct layout. I did consider 2FS or N2 on this layout but chickened out in the end! (Plus already plenty of code 80 to hand). Maybe one day.
  20. Thank you Pete. I'm liking your version of Kyle - you've really captured the essence of the place in a very handy size. May I ask where you sourced the buffer stops? They look ten times better than the Peco equivalent.
  21. Hi all. I’ve been meaning to begin a thread on here for a while and now seems a good time to try and focus the mind. This layout is based on Kyle of Lochalsh as it was in the late 1950s/early 1960s with a few compromises. It’s a U-shape, with the first leg of the U being a cassette board, the second the coastal approach to Kyle plus the MPD and the third the western side of the station itself. Each scenic leg is about 2m long. It’s a work in progress – fits and starts over about 3 years so far. The boards are a softwood/plywood mix with styrene, DAS clay, 3D printing and brass etching used for structures. Track is Peco code 80 with servo point control. First, here are some ‘helicopter’ shots of the model as it stands: The station and pier. The station building is not yet made but will be a low-relief model. I hope to include a traveling steam crane eventually. The second picture shows the station throat, fuel oil tank and signal box as the track runs beneath two road bridges. In reality the line divided before the signal box to run around to the eastern side of the pier. There were also carriage sidings leading up the platform ramp. The line disappears into a steep cutting, past the MPD and then runs onto a coastal embankment (the least complete section). The stone bridge is actually borrowed from further down the line but included for scenic interest. Now for some cruel close-ups: Wagons at the quayside. A Black 5 runs around its train... ...and backs onto the turntable. D5307 hauls a short oil train along the coast (I think the tide is out!) That's all for now. Hope it's of interest. Adrian.
×
×
  • Create New...