standardblue

This recently posted diorama may also be of interest, if you've not seen it already. https://www.rmweb.co.uk/topic/179819-glasgow-subway-workshop-diorama/#comment-5199389

Note that this unit wasn't one of the original Strathclyde units (501-514) so I don't think would ever have been orange (sorry, 'red'!). Post privatisation, some additional units were painted on carmine and cream, of which this is one.

Take a look at the toc's websites, specifically any enthusiast or kids sections. Transport for Wales has some colouring sheets, although not quite what you're after. I did see Southeastern put one of an Electrostar on Twitter (so probably on their website as well). Hornby have also done some side on views of their model art as colouring sheets. Actually, a lot of Hornby packaging has a line drawing of the stock inside, you could scan and use. The Hornby 156 I have is packaged that way. (Although I couldn't comment on the legality or doing that!) Google image search may also throw things up, there are plenty of colouring sheets websites out there. Hope this helps, Mark

Try searching Flickr for class 26s, plenty of old photos there that should give you an idea of what hauled what, back in the day. Here's the search link: https://www.flickr.com/photos/tags/class26/ Last time I looked, there were 80 pages to look through (I found what I was looking for) Hope this helps.

That's normal. It's a helpful indicator that the knob's not off before you flick the switch and apply power to the track.

A bit of googling had turned up a colour photo here: https://www.railscot.co.uk/img/53/121/ Mark

Isn't there a number of set engine speeds? Mark

That shouldn't be the case - modern storage formats and transmission protocols use error correction and error detection techniques to prevent just this. Many file formats (and no doubt database and archiving systems) do similar. Otherwise, you wouldn't be able to read RMWeb as it would just descend into a load of gibberish! Mark

That's an interesting picture, thanks Dave. What's the orange jumper? And, are those buffers temporary while the cab is removed, or always the beneath the skirt? Are they sprung? Thanks, Mark

Why not ensure you're mid gear and open the regulator? Mark

I think it's based on one from the Wisbech and Upwelling Tramway, same as Toby the Tram Engine. There is a similar W&U coach preserved somewhere, too. Mark

Yes, I'm surprised about the 150s too. Have they rebranded any stock, apart from the 175 that was repainted for the launch? All I've seen is removal or covering up of ATW branding. Stations and staff seem to have been rebranded, many before the actual start date.

The TfW units as a whole seem to be getting very scruffy these days. You'll quite often see similar yellow patches on the TfW 150s, usually the bottom corners of the yellow end where it seems to be vulnerable to damage. Often the yellow patch covers part of the turquoise nearby too. I Iuspect 150s in other fleets may be similar. Mark

My dad spoke to Peco at Model Rail Scotland last weekend, he got the impression that it'll be released fairly soon. Seems they had some trouble developing the control to stop it in the right place, but that they may have removed that feature from the final product. (It was originally meant to have several preset stopping points.) Mark

I received my order of ScotRail Mk3s yesterday. Overall, I must say I'm happy with them, but I did notice a couple of things that I don't think have been mentioned on here before: I've only opened one box so far, a TSO, and I noticed a couple of small black round pieces loose in the box. Turns out a couple of axlebox covers had come adrift. Has anyone else had this? I tried to push one back in, but it either needs a little more patience and persuasion, or glue! I'm a little wary of glueing, as it looks like the axle end is exposed with the cover removed. Suffice to say, I'll be opening the rest on the table, not the sofa, just in case! Also, the paint finish: while most of the coach is a satin/eggshell/matt/(not shiny) finish, the blue and white stripes seem to be a bit glossier, as does the light grey strip by the cantrail - I'm guessing this is a result of tampo printing these parts. Also, there's a rough edge through the blue stripe, looks to be where the lower body colour (the contentious light grey) is masked off, withthe blue then applied over the top. It's not particularly obvious to me (and no big deal), I noticed it under close observation while catching the light right on it. Not wishing to start another debate, just my observations that I don't think have been mentioned (apologies if they have and I've missed it!) Cheers, Mark

I was discussing this with a colleague before the break. We thought low voltage (eg 12V DC) lighting circuits could be a sensible move - after all, that's all you need for led lighting. It would likely be more efficient to have a single larger suitable power supply next to your consumer unit powering the circuit, rather than the individual ones in each bulb as is the case with a mains circuit. Part of the reason for suggesting the lighting circuit is low voltage is that it's a physically separate system to the ring mains and other spurs you get in a home typically round the walls. Mark

Not with them mounted up there, they won't!

We* run a 'vintage train' at the Pontypool & Blaenavon consisting of a GER and a pre grouping GWR inspection saloons. It's run regularly on quieter days and also when we run 2 trains (alongside the mk1s). (Details usually on the website and social media.) Mark * I say we, but in reality although I'm a member I've been unable to volunteer for a couple of seasons

ISTR a thread a year or two ago where someone did it in OO with magnets.

Ohm is where the 'R' is. Sorry...

There's a video of that somewhere on this site. I think the coach was motorised to make it controllable. I've seen fly shunting done in 00 with a chain, too...

This was mentioned earlier in this topic, see Bob Reid's post 2nd from the bottom on this page: http://www.rmweb.co.uk/community/index.php?/topic/107460-oxford-rail-announces-oo-gauge-mk3-coaches/page-47

But there really are (and were) always buses on Waverly Bridge...

As an engineer, I would assume they are a current class. Sorry...

Looks like Wemyss Bay (pronounced 'weems'). As an aside, the unit is a 314. Bonus points for identifying the type of unit he leaves on...