[wanted 8 pin decoder harness's]

Great thank you a call to  Dcc Supplies after holidays thank you for your time in searching.

 

[wanted 8 pin decoder harness's]

Thank you for link the trouble is i need 10 i found some on flea bay at £3.99p 8 pin plug one end and with leads may have to go down that route.Thank you for replying.

[Prototype Models N Gauge GWR Tetbury Engine Shed card kit]

Hi There is a new n gauge tetbury shed kit on flea bay item number is 125441673209        £5.00p plus £1.50p p+p no connection to seller or item  good luck.

[wanted 00 9F under cab pipe work.]

Hi Phil yes thanks always a possibility will look at some photographs/books and think it thru, Thank you for your reply, regards Jack.

[wanted 00 9F under cab pipe work.]

I am looking for 2 Genesis kits 00 9f under cab pipe work to replace the plastic molded part on Hornbys class 9f's Thank you in advance of any replies. ALL SORTED NOW THANKS FOR ALL REPLIES.

 

[wanted]

Hi i am looking for one of the old type Keyser's 00 kit locomotive drive axles with D shaped ends and a screw used to hold on the driving wheels, i do know many threw these and the wheels after as soon as opening the box but some one may have kept one by mistake TIA. ALL SORTED NOW THANKS TO A RM WEB MEMBER. 

[Comet Models Stove R: NOW sorted thanks.]

Have you tried Wizard models they took over Comet range.

[Paddington Bear in 00 gauge]

JUST LOOKED THE CAT NUMBER UP ON FLEA BAY ITS LISTED AS 1:36TH.

[Paddington Bear in 00 gauge]

corgi do a london tx4 taxi model cab (cc85925) with a figure of PB but not sure if its 00 or bigger, good luck in your search.

[class 124 under frame detail molding.]

Hi Mark thank you for message, i contacted Silver Fox but cost out-wade need, i need 8 of them nearly cost of full 124 kit,which as it happens may be the route i will take,after all, i see your in County Durham, i live 12 miles north of Durham city,regards Ian.

[class 124 under frame detail molding.]

I think it may be a case of getting them cast in resin,thank you for your reply, the search continues.

[class 124 under frame detail molding.]

Thank you for reply, if the seller is trixtrains-wba-online he only has main under frame/floor units, it is the piece that fixes to the under side of this i am looking for, thank you for replying, regards Ian.

[class 124 under frame detail molding.]

I am look for the under frame detail moldings from the Trix/Lilliput/Dapol class 124 Transpennine power cars any quantity.

[repairing Hornby prairie valve gear]

I am getting some n gauge code 55 rail sent to me and am going to attempt a repair similar to yours shown here, i just think Hornby will not bother to keep producing spares for older models now that most have been superseded by so called super detail versions, thanks for reply, Ian.

[repairing Hornby prairie valve gear]

Hello just found your posting for the 3D printed 61xx cylinders, did you make them if so can you give me some details i have one 61xx waiting for them here is hoping Ian.

[2mm GWR Loco number decals]

Normally people use etched brass cab side number plates and transfers for buffer beam numbers,Fox transfers do a selection of brass cab side number plates, they all so do water slide transfers to redo the buffer bean numbers, hope this helps you out.

[Website Login issue]

Yes i have just tried to log on to my account, hope its just a glitch got a couple of items on order with them.

[RIP Graham Jones NMRS Models]

So sad to hear this terrible news, i never met Graham but spoke on the telephone and purchased a lot of 0 gauge fittings from Graham, Graham also gave me a lot of help and advice which with the knowledge and experience  Graham had was always welcomed, not only a huge miss in the  world of modelling but also in the world its self. My sincere condolences to his family and friends, R.I.P. Graham.

[old style romford outside cranks NOW SORTED PLEASE REMOVE POSTING.]

Hi i am looking for two pairs of the old style romford outside cranks, flat crank with brass crank pin fitted, threaded to fit romford extended axles to finish a rebuild of a Gwr Aberdare, many thanks in advance.

[Impetus 16' Bagnall instructions.]

no problems just glad you got fixed up,have fun building kind regards Ian.

[Impetus 16' Bagnall instructions.]

Hi I have the same kit on the "pile" i can copy and e-mail instructions for you if you can give me your e-mail address to send to, it will not be till tomorrow morning if thats ok,hope this helps Ian.

[n gauge brass signal ladders]

Hello i am looking for some brass signal ladder in n gauge to finish off a project, if any one has any surplus i am interested ,thank you for looking. Now sorted thank you

[Template for Mopok Dynamometer Car kit]

Hi Tony, i thought that you would say that, have you got  J Russell Gwr coach books let me know as a pal of mine has just on the off chance it shows some details in them,thanks for the good luck on the hunt,regards Ian.

[Template for Mopok Dynamometer Car kit]

Hi Tony, if it is just the normal Hawksworth under frame details your after take a look on the old Comet website under Hawksworth 3rd and view the PDF for fitting under frame components hope this helps, i am after the Mopok Dynamometer  kit so i know i will not have the original paper copy, good luck Ian.

[Hattons PM-01 point motor extension pins]

Hi sorry as it happens i do not have any peco ones left, there is a seller on e-bay listing them separate if thats any help,