MidlandRed

Crikey - that looks somewhat like John Lennon circa 1967!! 😲

The TT model Rapido team could feasibly be inspecting a model loco on a layout to investigate how they make them run so smoothly 😀

Funnily, I have a PWM and it’s absolutely fine (I saw all the criticism of it) - I’ve yet to leap for a class 11 despite intending to when it was announced - I may still do. Strangely, I now have one of their Peaks as well (I’m not telling you how much I paid but it was absolutely a no brainer) - I did avoid D15 because of the livery comments on here, but more so I saw that @Phil Bullock repainted his!! I got one in economy green and can overlook the very minor issue with the curvature on the top quarter of the cab (which in my view is completely out shadowed by the look and general bulk and overall correctness of the model - it’s a really nice model, looks and runs great - very smooth - I believe they’ve updated the shape for the 44s etc to help/ respond to the electron microscope guys. I know we’ve come to want absolutely perfect looking models and indeed I have some on order from two sources who get close (one even closer than the other) - as for whose actually runs the best - well that’s another matter but these latest Heljans, along with my experience with the latest Hornbys and Bachmanns suggest these are all very good indeed.

I think the issue identified is that the Heljan looks less correct than the Bachmann from the square on front view. I don’t think anyone has disagreed with that. However it looks perfectly acceptable from most other angles that I’ve viewed it from. It is noticeable that all the photos you refer to show the Heljan front on but the Bachmann from more of an angle (not quite 3/4 front view) - so I’ve yet to see how good or otherwise the Bachmann looks front on in that version. The Heljan appears perfectly acceptable to me - particularly on a layout where it will likely be the only Brush type 4 - much more so via the TMC exclusive which depicts a late 60s early rail blue LMR version, the 9 of which built as such were somewhat celebrities at the time - the only version of the new Bachmann so far acceptable to a modeller of that era is ER D1565 - having seen that version there are elements of the front (to do with the top of yellow warning panel and shelf in front of windscreen) I don’t like equally as much as the issues with the Heljan - however they are noticeable from different angles than from the straight on front view, and ones which I’m more likely to see more often, as a model. Otherwise it’s very good as well.

I still think mine looks v pretty, in spite of all the discussions!! 😀

Did KWVR and LHR run into BR stations at the time - SVR extended to Kidderminster much later? Maybe that was why but equally, the railways may have taken the view they’d use historic liveries they liked or made up their own. The Dart Valley at that time, IIRC had everything in GW livery (including 1638) and locos such as 6697, 4555, 7029, 6000 and 4079 ran in GW livery in service on the main line in the mid 60s. I do recall feeling somewhat miffed when I visited KWVR on a loco society shed bash trip around Yorkshire in 1969/70 that even the railbuses were in made up liveries - as I’d never seen them in BR days it was disappointing at the time, although good to see them preserved - 46441 on LHR was another which stood out like a sore thumb, in a pseudo LMS lined livery. However it’s now great to see these photos as it sort of, defines that era of preservation.

Are we sure there was any directive? I certainly don’t recall it being reported or discussed in the railway press at the time and have only come across the suggestion more recently (basically on RMWeb). Only certain railways seemed to invent their own liveries (KWVR and L and HR being notable examples). SVR, for instance had its locos (eg 46443 and 48773) in BR livery - I don’t think they were unique, although as with all railway (and bus) preservation there was a tendency to paint stock in as built condition, which, in many cases for locos meant grouping or pre grouping.

Looking at photos of 1:1 class 47s on passenger trains, and also mixed rakes of mk 1s and mk 2s, mk 1 format stock appears to come out slightly taller than mk 2. However, referring back to the TMC video of D1960 on Little Bytham, the loco does look fine in comparison with the stock of the train it is depicted pulling (not mk 2).

And the EM1 (later class 76) used as bankers on Worsborough) Not a one off - I also saw this - the line concerned was the steeply graded and sharply curved link from the Bescot to Walsall line, round on to the South Staffs line towards Wednesbury, Dudley and Stourbridge Junction. I think the train loco was a Stanier 8F as probably was the banker. The junction for this line was under the M6 flyover - which was built in isolation at the time of electrification - the approaches were built slightly later. Additionally, Bescot provided bankers (class 25s from those generally available on shed) for trains travelling up grade, south towards Soho junction from Perry Barr junctions, through Handsworth Park - the trains were held at a signal just south of the short tunnel under what was the Endwood public house, Hamstead Road - possibly the starting signal for the erstwhile Handsworth Wood station (closed immediately post war) - when the banker(s) arrived at the rear of the train (out of sight beyond the tunnel and the curve) they communicated with the train loco (s) by sounding horns. This must have happened in steam days also, presumably?

I’m happy to be patient and am confident the locos will be great. In fact I’m thinking of ordering another. One thing in SLW’s favour, most of us haven’t paid any money so far, in stark contrast to some suppliers, whose requirement (or option in one case) to pay in advance seems v often to be taken up by purchasers.

It’s funny you should mention this, as I’ve also been mulling it over since the earlier discussions and after stumbling over the TMC video of D1960 on Little Bytham. I thought it looked rather good, even more so in weathered form. My conclusion is it only doesn’t look its best when viewed exactly front on - which is unlikely ever to happen in reality. D1960 looked ok in relation to the height of the stock it was pulling - which begs the question whether Bachmann’s look too tall!! In contrast with the previous comment about the eye brows (in reality the frame around the tops of the windscreens) the Heljan model does replicate this with a slight rise in the panel above each windscreen - my guess is the dimension of this feature is really very small to reproduce correctly in OO scale. Anyway my overall feeling is I’m happy with it, minor warts and all - and completely outweighed by the faithful representation of the early blue fye, four arrow, body side numbering livery - I certainly wouldn’t want to be attempting to repaint one of the other models into one of the final Brush 9, which were always something of a celebrity in my mind in the late 60s. Great that TMC had the vision to commission something for the transition era modeller! I shall always remember to look at it at least from the 3/4 view 😀 after all the only time I ever saw a loco fully front on (thankfully 😲) was on shed or at the end of a terminal station when I was stood in front of it - maybe on a bridge but that was from an elevated view and very rarely fully front on.

Great photos. However is it my imagination or is the space between the marker lights and the headcode panel on these two different (wider on 47 356 (D1884 in real money)) and the black area around the numerals in the headcode panels wider on 47 256 (D1934 in real money) - interesting as they are both Brush built (or is it an optical illusion because of the slightly different camera angles) 🫢

Romford.

https://flic.kr/p/2nmsTt5 I can’t get this to appear as a pic (D1960 at Crewe as built - Colin Alexander, Flickr) - however it does clearly show the slight curvature of the front panel and particularly, the location of the handrail in relation to the cab front. These look right to me on the Heljan and different from the Bachmann. The foot steps are also shown clearly and although Heljan’s left hand one is slightly too far left, it’s not as major as it appears against some of the other photos shown. In terms of its size, and height, given the comparison earlier in the thread where the Bachmann model was shown coupled to an Accurascale mk2 coach and the buffers are clearly higher, whereas the Heljan ones match, are we sure Heljan is wrong and Bachmann right - looking at the side by side picture above, Bachmann’s looks too big to me, although the overall shape looks right (the handrail is too low for D1960 and the cab front too flat, however 😀). The Heljan has slightly less space between the marker light and the headcode - that might make all the difference. Im not clued up enough on differences (Crewe v Brush built) but I do know D1960 is the penultimate Brush product.

Regarding the headcode box, having compared the image on Flickr of D1960 at Crewe carefully, I’ve concluded it is correct. It may look marginally odd from some of the angles we view model trains from but it certainly looks fine when looking at a more realistic viewing angle (in relation to how one would see the prototype normally). I too really like the new Bachmann model (other than the fact the only 1960s variant available is D1565, in two tone green, if you can find one). A Crewe built example and not suitable to be in early blue (D1953-61). However, and again having compared the Heljan with the photograph on line, I have concluded that, if anything the Bachmann version has the below windscreen hand rail slightly too close to the top of the front panel. Also, looking at the comparison photos further up this thread, the earlier models have too narrow (in relation to the width of the roof) a ventilator on the cab roof. Overall I’m happy with the model as is, and for another day, may execute the minor tweaks talked about above sometime in the future - it looks fabulous from layout viewing distance.

Yes, with the digital photo the construction joint is obvious - however it’s not with the naked eye and in any case could easily be fettled if required - that said the overall shape mirrors the prototype in that the buffer beam is inset into the cab side panels. The photos are not the best and these rebates are not as obvious in reality. The window rebates are completely yellow so as I will be removing the body to convert to DCC at some stage I’ll have a look and see if this is easily achieved, noting also @Halvarras comment about using a Sharpie. However they have got right the fact there is no obviously visible black window rubber on the prototype - the window surrounds as built (from the front) are completely yellow. Im pleased with the colours and in bright light the blue does ‘pop’ to a colour similar to an Accurascale Siphon G (well my one, anyway!!). In reality, based on my memory, the shades of rail blue of rolling stock varied, particularly in the late 60s, dependent on the level of weathering - sometimes almost bleached white and particularly when subjected to the rigours of the WR (washing plants and sea wall salt spray!!)

Very impressed with my D1960, which was delivered today. This was a must for me, for my 67/68 set layout - back in the day, D1953-61 and D7660-77 were quite a regular (and notable) sight in my trainspotting days in that era. The loco runs very smoothly and represents the prototype very well (notwithstanding the glitch in the depiction of the engine roof hatches mentioned in the Heljan topic). Looking at the photo of the prototype loco on Flickr it’s a very good representation - looks great.

My D1960 was delivered today from TMC - also bought at Ally Pally. I’m very impressed with the model and particularly following some of the criticisms previously levelled (notwithstanding the error on the roof hatches, which may be capable of being corrected). I’ve compared carefully with the photo at Crewe on Flickr of the prototype and concluded the front is, actually pretty well accurate. Adding a bit of dirt to the ‘ledge’ in front of the windscreens will add a little more realism. It’s a very smooth and quiet runner, even more so after running in. This will look a treat alongside the SLW class 25, D7666, I have on order, also in late 66/early 67 corporate livery. NB the digital camera is very unforgiving…. the guttering on the prototype above the windscreen is clearly blue (or dirt) - the bits of slightly overlapping yellow on this model are not particularly visible with the naked eye - if I can be bothered I may touch it over or weather it a little in due course.

My understanding of the susceptibility of Walsall station to flooding was, as stated by @TheSignalEngineer the problem that the culvert through which the Ford Brook passed under the town centre was periodically over topped. No doubt, as with all culverts, there was an element of blockage but particularly when the flow at the upstream (northern) end of the culvert just south of Ryecroft, on the east side of railway exceeded the entry capacity, the brook diverted to the adjacent four track railway which became a river as the railway is on a downhill gradient, rejoining the brook south of the station! This happened at times of excessive rainfall, and the associated River Tame was susceptible to flooding at similar times further south, between Bescot and Perry Barr - on one occasion in the 60s, one of the overbridges was washed out and Great Barr (now Hamstead) station was flooded. The process at Walsall was best viewed from the multi story car park which spans the railway just north of St Paul’s Street. The railway certainly continued to flood after the Sadler’s Centre shopping mall was built next to the station and has also affected that. The very low under bridge south of the station (Bridgeman Street) has raised footways and also floods - there are plenty of photos on line of vehicles almost totally submerged with the driver sitting on the roof - the raised footways giving the illusion the water was only as deep as the edge of the footway!

I only noticed on second viewing of this selection, but E3041 definitely looks to have been repainted in rail blue syp.

Fabulous - a Brush bodied Midland Red AD2 or D5 zooming (perhaps they were a bit more sedate in reality) down the hill. Those strange circular street lighting units, supplementing the standard concrete ones in Tipton Road are very memorable - I don’t remember them anywhere else except Dudley.

(BBC link didn’t work from the forum for some reason - just toggled to the earlier post with a BBC link!!) Network Rail has stated the Newington land slip is caused by climate change. It has created quite a large rectification work which is now not expected to be completed until Monday - it’s interesting also that there is large new housing development on the other side of the embankment which, from observation from the train, during construction, appeared to take some effort to dewater. My understanding of the recent periods of rainfall deluge in the south and south east have been generated by the position of the jet stream being across the middle of the country so every front coming from the Atlantic has hit that area with heavy and sometimes concentrated rainfall. There have been land slips in coastal areas of Folkestone and elsewhere recently along with significant cliff falls on the south coast. It is also notable that the daily amounts of rain in many instances have been multiples of inches (certainly over an inch) where in the past that would have been absolutely exceptional except perhaps locations such as the Welsh mountains for instance. Latest info from Met Office:- Wettest February since 1836 in the south of England. Temperature has increased on average by one degree over the last 60 years. Warmest February on record.

South Eastern trains have also been suspended for the last week by a landslide near Newington also. Planned to be repaired by tomorrow but given the volume of rain in the last week that will remain to be seen - bus substitution was still in operation this evening - interestingly the A2 road which the buses use has been subject to severe congestion also owing to the southbound A249 beyond the M2 being closed for five weeks also - so the buses have encountered significant delays en route. https://www.kentonline.co.uk/sittingbourne/news/landslip-images-show-fallen-embankment-causing-travel-chaos-302605/

Mine has arrived as well, and now run in. It’s a delightful model and very smooth runner down to a crawl. Pity about the right facing BR crest - I’m not sure I’m going to bother to try and rectify it - it’s only visible at close quarters!! Excellent packaging and delivery by Hornby as well.

I’m not sure when the first standards appeared in preservation but certainly locos like 46443 (SVR) were in BR livery from the earliest days. I may be wrong but I’ve got the feeling the railways involved took the livery decisions off their own bat, as it were.