Duncan John
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Events
Exhibition Layout Details
Store
Everything posted by Duncan John
-
I’ve had a notification from Hattons that the 121 won’t be available until October-November anyone have any information on this. Duncan
-
Hi has anyone fitted DCC sound to any of the Ace loco range and does anyone have a guide to fit dcc to one of their Britannia’s. Thanks Duncan
-
Hi is it easy to take this spring off
-
I had given it a three number address but then reverted to two which worked. Thanks for the tip I’ll remember that for next time.
-
Hi everyone I just wanted to thank you all for your suggestions/solutions to my problem, I finally have a fully working loco with all the appropriate sound and functions. Firstly I deleted the loco from the Z21, I then placed it onto the programme track and reset it via the reset to factory settings CV8 having first adding it back on to the Z21, I used a different address and happy days it worked. Thanks again for everyone’s advice and tips. Regards Duncan
-
Ok I have put the loco back on the programme track it reads the address but will not move Z21 and iPad used I tries the loco with my Samsung phone again it reads ok on programme track but won’t move. I tried my pannier tank no problem moves fine with iPad and z21. it can’t be the chip as it runs fine using a gaugemaster do loksound v5 chips work with Z21 I have an A4 that has loksound 4 chip works perfectly these are both the L plug and play.
-
I also have an issue today I put a loksound chip into my o gauge A3 I could use my Z21 on the programme track addressed the loco but when I then tried it on the main nothing at all then tried it with a gaugemaster controller no issue at all worked first time. I was trying the Z21 with my iPad.
-
Hi how good is the sound and did you have to drill out anything. Thanks Duncan
