Ewan Forsyth

I have managed to work out how to do this using a Digitrax DB150. 1) Power off - wire Digital IP DCC in with DCC BUS 2) Power on (RUN mode) - 3) (SET mode) SWCH - Select ## - push C (once) 4) Turn to (RUN mode) (Repeat as per DCC concept instructions) 5) Use t/c to change point motor Oddity that this was not working previously. I think it is due to keys in DT400 when selecting t/c was pushing 10/11 thus changing the set number

Hi jpendle, This is exactly how I assumed it would work. However it does not set the motor to that 'switch' number. A contact with Digitrax results in a "no comment" as 3rd part hardware. We shall see if they will help an say whether switches are programmable. Thanks E

Hello all, I am looking to control Cobalt IP Digital's through a Digitrax DB150 command control system, though I am coming across a few issues. 1) How do I set an accessory to a switch number in a digitrax system - I am really finding this difficult to find in the manuals and online. This is not described - unlike setting a loco address. 2) Setting the Cobalt to this Digitrax switch accessory. A step-guide beyond that by DCC concepts would be invaluable. Any advice or guidance welcome if related to Digitrax systems and Copalt IP digitals.