rafregt1

yes I have a mix of both peco points and seep motors I will check the seep points and see if that is the problem thanks

My layout has been working well for a while, but now part of the layout keeps tripping out on the main line over the top of the freightliner depot. as soon as I connect the main line it trips out I have not changed anything I have cleaned the whole layout but has not solved the problem. as you can see by the photos were it says main line that is were the problem starts the station area is ok also the freightliner depot. just the main line that the 60 is on can anyone help me to solve this many thanks

Just to say many thanks for all the answers to my problem, But I managed to find the problem a bad mistake made by me it was the two wires to my busbar which when attached to the track were round the wrong so problem solved.

thanks I will try this

Thanks for reply, I have not coloured coded the wires , all i have done is put the wires into the seep motor as per the letters on it D and E for the polarity of the point motor I have changed the wires around but still a fault,

I have looked into this before, but i am still having a problem, i have now changed my points and put in a seep P1 motor to the two points see enclosed photos, i attached the points to the layout with ins, fishplates as per the photo, but as soon as i put a loco over the track it tripped out. The two points are wired into the bus bar , and when you put a loco onto them without being attached to the layout no problem . I have even changed the two wires around D and E on the seep motor but no difference .any info will be of great help, many thanks.

many thanks for reply will try this and see what happens.

I have checked all my peco points which have been made up with a PL13 switch which has been soldered as per the diagram on the back of the peco package as my layout is quite large I have checked each point to see the the power is alright . i am finding it very hard to try and find the problem has anyone got an answer that would help me to solve the problem. many thanks for any help TOM.

many thanks for answer i will do this

I am using PL13 switches on my points

I have a problem with my power on the layout, which is DCC, can someone be able to advise me. . If you look at the first photo this is my diagram of my layout. all of the layout works ok but for were i put the arrows when a loco come to them it trips the power, all my points are DCC , so have full power I have tried to work out were i am going wrong. but i am stuck. can any one advise me how to solve the problem, many thanks for any help TOM.

when I put my 00 gauge class 37 on the line the lights work and also it powers. but I get no sound from it, I have reprogramed it as well but still no sound can someone tell me what I can do to fix this. many thanks.

no I will try that and see what happenes

yes I have done the points as the v isolated and the outer live. I have done the points so as to operate on ddc

can someone give me some advice as I am having a small problem with the track on the small shed siding., when I join the track to the main line it trips out, so I put two iso joints in the middle. and it worked alright, but as soon as I sent a loco over the iso part the loco made it trip out. on my points I have made the v of the point isolated and the two outer live on all the points. in the diagrams enclosed. . I must be doing something wrong with the way the points are made up on the branch, my layout is ddc .