Jump to content
 

PenrithBeacon

Members
  • Posts

    5,283
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by PenrithBeacon

  1. https://www.alexandrapalace.com/visitor-information/car-parking/ I shall be going by car
  2. Anyway, I have bought one after all that fussing about. It's the post war LMS example and it arrive yesterday. Looks good!
  3. Perhaps these AGW wheels '4847NW 3' 11" 15.6mm 12 spoke Plain' will do. I've edited this post to reflect a change of view I've had about this conversion. Looking at the S4 Manual the overall width of P4 wheelsets (back-to-back plus twice the tyre width) should give you 19.75mm max. 'Kier Hardy' shows in his YouTube film that the space between the frames is 21.26mm which should give enough space to fit P4 wheel sets. The weight diagrams for Classes 08/09/10/11 have been published in 'A Pictorial Record Of The Diesel Shunter' (Colin Marsden/OPC), the wheel spacing is the same for all four and both Brassmasters and Bill Bedford do nice coupling rods for them. Still not convince about actually buying this model, I've got so many Bachmann 08/09 in stock. Annoying.
  4. It turns out the the axles on Heljan's model are 2mm diameter so conversion to EM/P4 using AGW wheels is pretty much out.
  5. Thanks for video and I have liked and subscribed. It sort of answers the question I posed earlier in that, yes it is possible to convert to EM/P4 but only if you have a lathe. It is clear from the video that the axles are not 1/8" or 3mm and so the AGW 3'-11" wheels will not do. Thanks for that, I won't be buying the model. but my best wishes to those who do.
  6. Does anyone know the axle diameter please? AGW does a 3'-11" wheel for P4/EM and I'm wondering if it might fit.
  7. I've been waiting for this. In my experience Bachmann locos are fairly simple to convert to P4 which is a great advantage for me. Accurascale seems to put obstacles in the way 🙃
  8. Is there enough space for EM/P4 wheels, please 🐈‍⬛
  9. I think it's a question of what do feel is right for you and how much you can afford anyway. Added to that is whether the seller will accept returns and the quality of the item. I always set a bid which is my valuation and make it a rule not to engage in a bidding war. An unbuilt item I will offer less for. Having said that, my valuations are often for less than others are prepared to pay. Last week I lost in bids for 2 D&S wagons which went for huge sums. Both could have been scratch built in Plasticard in less than 5 hours,which is weird.
  10. Boilers were very different. The 2P was the same as the 4F (although I'm pretty certain they weren't interchangable) but the 4P Compound was a lot larger. The RCTS book on LMS boilers will give chapter and verse
  11. Now that SPV has closed I'm at a loss to know where to look for North American railway/railroad dvds in the UK Can anyone help?
  12. The turntable in the top right was part of the LYR locomotive servicing at Victoria. It too was modified, but retained in different position during the 1929 resignalling. I would beware quoting British Railways Illustrated without verification elsewhere 😉 https://maps.nls.uk/view/126522809 https://maps.nls.uk/view/126522812 Top link c1915, bottom c1931
  13. https://commons.wikimedia.org/wiki/Category:Manchester,_South_Junction_and_Altrincham_Railway_RJD#/media/File%3AManchester_RJD_47.JPG I cannot find any indication of a GW goods station in Manchester either on OS maps or the RCH junction diagram for Manchester, please see the link above. Although I haven't been able to absolutely verify from WTT that the GW (my copies, which were photographs of TNA documents, disappeared during a change of computer) had its own goods facility in Manchester it seems to be a sensible assumption that it would use Liverpool Road. I have explained above why the LNW wanted to limit the GW's access to Manchester to Exchange rather than London Road. It was simply a question of capacity on the MSJ&A between Castleford Junction and London Road. Then, as now, it's an issue. Then, as now, the line couldn't be quadrupled. The LNWR was spending a fortune on by-passing Manchester for freight during the late 1850 to mid 1860s period and didn't want the GWR (or MS&L for that matter) intruding. It's all documented at TNA if you have the time. After Ordsal Lane was closed in 1904 the site was re-purposed as a wagon repair workshop but locomotive servicing facilities were built. These comprised of a turntable, pits and watering facilities. These remained well into the 1960s and could be viewed as trains passed by. The locomotive servicing facilities at Exchange were removed during the changes caused by the Deal St to Victoria signalling/track remodeling work of 1929. There is a lovely photo of a GWR 2-4-0 on this turntable taken before WW1, but I don't know of a photo an LNWR locomotive on it.
  14. Yes it did close as an engine shed in 1904, but the servicing facilities stayed in use well into the 1960s when it closed completely. I wouldn't care to say that the GW locos didn't use Patricroft after 1904 but all the photos I've seen are of them at Ordsall Lane even those taken after 1904.
  15. The GW and LNW jointly owned the Birkenhead Railway. As part of that arrangement the GW had running rights into Manchester from Chester. The GW wanted those rights to be to London Road but the LNW didn't want more traffic over the elevated section of the MSJ&AR in Central Manchester so they agreed that the rights would run to Exchange instead. GW locos were serviced at Ordsall Lane and GW trains to Manchester were withdrawn in 1941. The GW did have an office in Manchester but I can't remember where it was.
  16. I know that DCC has many adherents who swear by it. To me it's just another layer of complication. With RC there's no power to the rails, so no cleaning of rails and tyres and none of the maintenance overhead underneath boards. The controllers are simpler and as power is 3.7v and the electronics are rated at 6 or 12v no chance of burning stuff out. I like the KISS principle, RC does that for me.
  17. Yep pretty sure that the Deltang/Micron Rx will be OK because they're much the same size of the DCC stuff. The query was about being able to fit a charging socket and DPDT switch needed for RC because the model is so small. I'd be surprised if it's possible.
  18. Just thinking about radio control! Does anyone who has one of these locos think there's enough space to fit a charging socket and a switch? 🤪
  19. Can't be sure because I haven't taken mine apart. But I always use Singer oil because I can be sure that it too won't rot plastic 'Singer' Oil Lubricant for The Mechanical Parts of Appliances https://amzn.eu/d/c3gRyiL
  20. GT85 Multi-purpose PTFE Spray Lubricant Penetrant and Water Displacer 400ml https://amzn.eu/d/iz4T9sL I use this in stead of WD40. For cleaning up grease I use IPA
  21. Sorry to be picky, but I'm pretty sure the Fallowfield loop closed in 1988. Stations closed in 1959 (?)
  22. Doesn't Judith Edge do one or is it a different prototype https://www.ukmodelshops.co.uk/catalogue/judithedge.html
×
×
  • Create New...