alibuchan

Yes it is the YD6061LN. If the other groups don’t have a DCC system that offers LocoNet, then there is no incoming DCC supply to the board for it to distribute.

Hi All, I'm after a bit of help and guidance. We are installing a detection system into our modular layout, using the YaMoRC LN6061 system so that we can run dispatch control in our modular meets and follow the locos around the layout. However, when we are out at other groups meet-ups, we would prefer to be able to bypass the system, so that the other groups are not forced into using the DCC system that we are using. The common negative feeds have a very simple solution, of just putting the plugs at each end and ignoring it. Easy peasy! The separately wired positive connections are causing more issues. I have 15 sections on my module, one thought was to wire single pole double throw (SPDT) switches in between the YaMoRC LN6061 board and each of the track sections, as per the (incredibly crude) drawing below. However, I was wondering if there was some way of doing this without having to manually throw a bank of switches each time, possibly using some sort of bridge rectifier circuit. Hopefully, someone out there will be able to assist. Al

They could work. I will have to make an order.

thanks for that suggestion, but nothing suitable in that shop either. It looks like I might have to try PMPs suggestion and try some freehand cutting of plasticard or offcuts of brass that I have to create what I need. Alistair

Hi all, After a bit of help I'm looking for a supplier of Etched brass, Plastic, 3D printed, etc. riveted plates as per the picture below. I am after bits that are 13mm Squares or Circles (either will work) and various sized rectangular bits. If anyone could point me in the direction of a seller that would be great. I have spent most of the day on the web trying to find them, and completely drawing a blank. Can anyone help me? Thanks Alistair

Will you be looking at doing the same for the Rapido Bits lines as well? Some of these smaller items could sell quite well especially the ditch lights and beacons. Al

Feb 15th 2019. 68033 and 88002 took one KUA and a pair of support coaches in to Bicester MOD for storage.

With obvious reasons we have decided to postpone this event. We will be looking at doing an open meeting in the future once this has all gone. Alistair

Chase rapido up as they have found a few in their warehouse and are bringing them over for Warley. You may get lucky, may not be the number you want but does mean you can play with it

I was pestering them for a while and provided them with some detail pictures, but nothing seems to have happened with them. my 2 68s are lonely too

Steve posted on the LLC Facebook page in Feb to say that the Ruston was 8-12 weeks away. But did also say he had been ill since Christmas. Might be worth trying to contact through there.

a couple of sets gave gone through Banbury when Bristol Parkway was being updated last year. unfortunately it was a ROG 47 hauled move not 68. The Scotrail Sleeper has also gone through when the knitting came down on the WCML and it was stuck at crewe. They stuck a 67 on the front and dragged the whole lot to London via the chilterns.

One thing to remember is the West Coast Mainline is shut between Coventry and Birmingham all of the bank holiday weekend. Just to add more issues in to the mix, both Aston Villa and Coventry are playing at Wembley Stadium on Saturday and Monday respectively so remaining services (Chiltern Railways) will be very, very busy on those 2 days. Hope you have a cracking trip. Alistair

They aren’t bringing the 60 anymore as it’s needed somewhere else. They are now sending a 56 in its place which works out well as the 56 that was going has pulled out.

They aren’t bringing the 60 anymore as it’s needed somewhere else. They are now sending a 56 in its place which works out well as the 56 that was going has pulled out.

Thats the scratch built model on kings park

It’s Mike clearing up the web siteorder system. Some people have got 4 order numbers for the pendo (deposit, payment, lights, sound upgrade). I have had 4 (patriot, TEA, pendo Deposit x2) in the past few days.

I think that this is a very vaild point and Revolution said the same with the 321. The more options that we are given, then the more the money is spread around. Hence why Farish will do 3 models in different liveries and we just have to accept it. There are 6 different sets available, with the differing of number of coaches and with or without black window surrounds. Possibly too many options were given too us. We are well known for being indecisive look how many different scales, Eras and Countries we model. Im glad the 14 was available to us though. Al

We don’t actually know the amount of models of each type sold. In N it could be 75% of the pledged is for 14car trains, where as it may only be 15% for the full length unit and the shorter 7/9/10 car units amount for most of those sales. Al

You just have to look at the RevolutioN threads for the IZA (cargowaggon), HOA (stone hopper) and TEA tanks. Every few comments, you get someone asking for them to be released in 00 gauge. They have managed to get the TEA through into production and got to the minimum quite quickly showing the buying power of the 00 modellers. It’s unfortunate that the APT-P hasn’t quite got there yet, I’m hoping that it will, as I really want my 14 coach unit! Hopefully there is a long enough period for the N gauge orders to be collated. Al

form an update on N Gauge Forum http://www.ngaugeforum.co.uk/SMFN/index.php?topic=23000.2085 They are currently bobbing around somewhere between China and Felixstowe. Not due to dock for a week or 2. Al

of for very easy use, you can just buy this.....http://www.kernowmodelrailcentre.com/p/49568/86613-Tillig-HO-Styrostone-curve-super-elevation-sheet-950mm which gives the correct angle for the cant and is £2 for nearly 1m. they are expecting it back in soon or you can try other places. Alistair

I would assume that as Rapido have fitted speakers in all of the Pendo’s that the same method would be used on the 92’s, as it only costs pennies for a job lot of speakers. So even if the body swap isn’t possible due to any detail differences, it would be a relitively simple job of swapping the decoders over. Alistair

The one that the Modeller took to review was being used all weekend by me on Kinlet Wharf at Warley. That has a test fit box with Grey scale colourings and a prototype foam tray that wasn’t the finished article. Although there may not be many more models to sell, in order to generate some hype and good feeling that people’s hard earned money has been put to good use. There are also some people that may not use forums so this is one of the best ways to get the news out that they are nearly here. Give them a break, it’s not going to be too much longer before we get our grubby little mits on them!

John if you have a look at my pictures on kinlet wharf the pantograph is somewhere between half and 3/4 height and it looks good sitting just below the wires. If you disconnect the spring on the Farish pantograph it drops them down to a much better height. Alistair