Chris_nicole

I have cleaned the wheels and oiled the gears. Lil' Donkey now runs much quieter, with less swagger and better response to the controller. I have no plans for a German layout, but I do wonder what sort of rolling stock ought to run with it? Cheers, Chris

Thank you, That's helped me find out a bit more about it. Cheers, Chris

Hi, I found a small 0-6-0 tank locomotive in my N gauge collection. IIRC I bought it at an open day at York MRC about ten years ago. It looks Germanic to me, but I am more familiar with British stock. It's black with red wheels and underframe, but has no markings or branding that I have found yet. Diecast metal body, brass pinion gears and simplistic driving rods, no coupling rods. It's a good willing runner, but rather noisy with a distinctive gait. I apologise for the muck and dust, It's been in storage since I bought it. At this point I can't recall why I bought it as it's way outside my usual interests. I can only say I was charmed and intrigued by it! I am not looking for sale or valuation, I would just like to know what I have got. Also any advice on cleaning and maintenance. Cheers, Chris

Hi Mike, did these change colour after you put them on the layout ? Sunlight will fade some colours or printer inks. I have some Bilteezi platforms that are fading from dark weathered red brick to weathered yellow brick! On the other hand, you could call it Engineering Brick blue... Spectrum Noir do a range of spirit based felt tip pens in useful transparent colours that may be helpful in recolouring your walls without distorting them. These are available at decent craft stores for card making and artist supplies. You would need to test them first of course. cheers, Chris

In hindsight and having checked my posts, I may have unfairly slandered Hobbycraft foam core. I actually got my larger problematic A1 foamcore sheets from The Works. I still stand by the black foamcore from Staples. That's good stuff. Cheers, Chris

I used foam core and Extruded foam for my layout. There are photos in RMWeb if you search for Jenswell (or click the link in my sig.) The main baseboard was a 50mm slab of Knauf pink foam 1200 x 500 mm with a layer of aeromodeller light-ply beneath the track. I used Hobbycraft foam core wrapped with Fablon for the layout surround. As noted it is not as sturdy as other brands and it does warp if it gets wet/pva. I had used Hobbycraft foamcore for a building base. It bent like a banana and had to be replaced with mount board. I used Staples black foam core for some of the structural modelling, platforms, ground surface and loading dock. Also for my Fiddle Sticks. This is great stuff, it stays rigid and has a better paper/card surface than Hobbycraft white foam core. I would use Staples black foam core again. Cheers, Chris

Those do look rather nice. Just thinking, the Hull and Barnsley used to run four wheelers and have one under restoration. What are the chances? ... I may have to forgive Hornby for shutting down the Humbrol factory. Cheers, Chris

That looks very good. I didn't know you could get A5 boxfiles. I am curious how you made the water surface in the canal ? Thanks, Chris

Hi, Sorry, I never got around to opening up the gear box. The model went back into its box and has not been run since. It had been an impulse buy after our first show. It was the most expensive model I have bought so far. So when it started going clicky, I was rather disappointed to say the least and the missus was not impressed! I would have liked to get a Class 14, but after this I am very reluctant to buy from Heljan again. Thanks, Chris

Superquick brick papers can work with other kits. I have used SQ Slate papers on the roofs of Metcalf kits because I prefer the look and it makes the roofs consistent across a variety of card kit buildings.

I have a couple of Micro models sets, but I have not tried Millimodels yet. 1/200 is a minor wargames scale so there is a fair range of white-metal military figures and vehicles available mainly for WW2. https://www.skytrex.com/10-action-200-ww11 Wargames 10mm scale (referring to figure height) is slightly larger than true 1/200 but has a much larger range of suppliers and figures. You might find some of the WW1 sets useful. For example Pendraken miniatures produce figures and vehicles for a WW1 trench railway. https://pendraken.co.uk/world-war-i/trench-railway/ Have fun, Chris

I have used Superquick Slate paper on the roof of Metcalfe buildings. I feel that Metcalfe's roof slate pattern is one prominent area that really lets down their models. I have also 'deconstructed' Builder Plus kits, using a paper photocopy of the BP kit to skin a mountboard carcass. Try it and see how you get on. Chris

Thanks Izzy, I will have another look at it when I get home and try running it without the intermediate gear. I will let you know how I get on. Regards, Chris

Thanks Alan, I have emailed Howes for further advice. Regards, Chris

I have a W&M Railbus too. Now it has started clicking and 'hiccuping'. Taking the cover off the gearbox on the offending axle appears to show the intermediate brass gear jumping out of mesh. I have had this model for over three years now. Is there anything I can do to fix it ? Chris

Having built something similar, my biggest regret was using set-track points. They are very easy to set up but can give you running issues with small locos losing contact and larger locos not liking the sharp angle. If you can get streamline or live frog points now, they will save you frustration later. Have fun, Chris Jenswell

I have renumbered my Sentinel. LNER 8151 was a Hull shunter and spent most of its working life in Sculcoates goods yard. I have given mine its LNER number on one side and its BR number on the other so it serves double duty! Chris

Wow! While I am impressed with the detail you have achieved on these models, it is the underside shots showing the practical simplicity that really takes my breath away. You are demonstrating something very achievable here. Heck, even I could have a go at something like this! Thank you. Chris

Anyone looking for a Christmas train project might like to try the following models: http://www.delta7studios.com/Delta_7_Studios/Christmas_Models.html Seasons greetings, Chris

These are very impressive modelling. What kits are they ? Chris

I got departmental 57 from the first batch. It's a lovely model but only had it's first real run out this last weekend. It attracted some very favourable comments. I was regretting not getting 68150 as that's sold out. Renumbering the GSR Sentinel is definitely an option, then I could have one of Hull's LNER allocation... I ought to look out for a Sentinel railcar too... Chris (Black Hat)

An acquaintance of mine has recently produced a card locomotive kit that might be of some interest to this group... I mentioned these before when he was developing the kit. now it's available through E-bay. He is offering a card kit of Bulleid's Leader locomotives in a range of liveries. Look for Item number: 140794020641 on Ebay.co.uk http://www.ebay.co.u...1#ht_582wt_1394 I intend acquiring a couple myself with a view to motorising one of them if I can find a suitable chassis.. Regards, Chris