Jump to content


  • Posts

  • Joined

  • Last visited

Profile Information

  • Location

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

gwrman's Achievements



  1. You can still get cascamite on ebay from several sellers here's just one http://www.ebay.co.uk/itm/CASCAMITE-ONE-SHOT-POWDERED-RESIN-WOOD-GLUE-POLYMITE-EXTRAMITE-/110873740779?var=&hash=item19d09705eb:m:mOR6lozvpAhG1AqAx3Ks9pw Nigel
  2. Hi, you could try one of these https://www.dccsupplies.com/item-p-102834/curly-cable-nce-power-cab-1-5m-6-wire.htm Nigel
  3. Hi, if you want to go one step further attach 1mm x 1mm magnets so you can uncouple the steam pipes. http://www.ebay.co.uk/itm/50-tiny-Neodymium-disc-rod-magnets-1mm-dia-x-1mm-N35-craft-fridge-diy-magic-/181657770008?hash=item2a4ba59818 Nigel
  4. Hi, thank again with all the help, with detailing in mind I've just bought some of this covered beading elastic for the pipe work, it has the right movement and look for it, also for £2.99 you get 25mtrs. http://www.ebay.co.uk/itm/like/Covered-Beading-Elastic-Cord-1mm-Thick-25m-Jewellery-Making-COLOUR-CHOICE/360689556697?hlpht=true&ops=true&viphx=1&_trksid=p2050601.c100085.m2372&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D32710%26meid%3Db40ff52621e04eca967b496be6fc1e61%26pid%3D100085%26rk%3D1%26rkt%3D3%26sd%3D201397053685%26clkid%3D8402883624688693026&_qi=RTM2052812 Nigel
  5. I've been working on my depot building it's 17" x 9", just paint and detailing to go now. Nigel
  6. Hi, I used to have a few 7mm locos and used brass Dingham couplings on those which I blackened with a permanent black marker, it worked brilliantly. Nigel
  7. Hi David, I bought some of these and there fine only problem I had was stopping the joints moving while the glue was setting , so I put PVA on the joints then a spot of glue from a hot glue gun to keep it square while it set. Hope this tip helps you. Nigel
  8. Hi guys, thanks for the help, the video especially it made life a lot easier. Nigel
  9. Can anyone help me in the rough shape and positioning of the wire loop or bar used for coupling on locos using tension lock couplings on the wagons and the gauge of wire to use. Nigel
  10. Does anyone agree with me that today's China explosions are going effect release dates and supply of models from Bachmann and Hornby, also a bad time to be ordering things from China which would have passed through that port. But bring this up, I am also thinking of the family's of the people killed in this terrible disaster. Nigel
  11. I just bought one of these on Ebay on thought I'd share it with you I can connect it to my DCC bus and power my 12v dc accessories off it, It is a New PSU1 Blocksignaling universal 12v dc power supply. it provides 3x 12dc outputs from a single input range of ( 15v to 32v dc 14v to 24v ac DCC ) each output protect with a separate 250mA self-resetting fuse http://www.blocksignalling.co.uk/index.php/12v-dc-power-supply-with-universal-input-psu1 http://www.ebay.co.uk/itm/BlockSig-NEW-PSU1-BLOCKSIGNALLING-UNIVERSAL-12V-DC-POWER-SUPPLY-PSU1/121488342991?_trksid=p3693.c100102.m2452&_trkparms=ao%3D1%26asc%3D20140212121249%26meid%3D656b9faa29ec4446a2063bd541f4a060%26pid%3D100102%26 Nigel
  12. Hi, I fitted lights to some Peco pits once for a club I was in but I haven't got any photos sorry, I used 2mm x 5mm x 7mm rectangular LED's like these http://www.ebay.co.uk/itm/10-5mm-x7mm-x2mm-square-bright-white-pre-wired-led-for-tamiya-trucks-trailers-/252018571923?pt=LH_DefaultDomain_3&hash=item3aad7a3a93 or (don't take any notice of the colour LED its just for reference) http://www.ebay.co.uk/itm/Rectangular-LED-White-5mm-x-2mm-Pack-of-10-/121178614926?pt=LH_DefaultDomain_3&hash=item1c36ceec8e Nigel
  13. Hi, try these, these are excellent between boards or on hand held's because they screw in place and different amounts of pins http://www.ebay.co.uk/itm/GX16-2-Pin-to-9-Pin-Plugs-Chassis-Sockets-Audio-CNC-Aviation-Ham-Radio-CB-D-/121602637988?pt=LH_DefaultDomain_3&var=&hash=item1c501500a4 Nigel
  14. I think you've got the wrong terminals for the switch try looking here http://www.dccconcepts.com/vamr/owners-manual-cobalt-ip-digital-point-motors Nigel
  • Create New...