alangdance

I ordered from there ebay shop. Item arrived in 2 days

Anybody still waiting for their 128 from Revolution. Been 2 weeks now since I paid the final invoice.

Still waiting for mine. Still no confirmation from either Royal Mail or RevolutioN. I am a bit surpised that dealers are getting theirs before people who support the crowd funding for the 128.

still waiting for my invoice.

I have brought a 2nd hand Graham Farish Class 61xx but it did not come with its instruction. This is the old Poole type. Wish to remove the body. Does any body have a copy of the instructions or know how the body is removed. Have check Bachmann site but no info on the Class 61xx.

just waiting for my email to pay the final amount. Looking forward to have a play.

ANY REVIEW ON THE Class 128 parcels DMU

Carl just a small update on Vale of Oxbury for you. Added 2 extra roads in the main fiddle yard and 2 on the branch FY. All fiddle yard points now are control by servos and are connected to a Arduino servo controller. Points and signals on the scenic side are still solenoid motors but now are connected to a Train Tech point controller. I now can either operated the points through handsets or the computer software.. I now have also added route selection for the main fiddle yard through the computer software. The branch line operation is now totally hands free and runs through the computer software as well. These to do New mimic board (as I still sometimes like to operated a point from a switch) which will be DCC Controlled. Add some lighting to the buildings. Add some more details to the dairy. I think this is as far as I want to go as this is a excellent modelled. I have to add this runs so well and I could not be happier that I brought this from you last year. Alan

Bach-Far model I have had a look but could not find anything on the web site. This is a moulded into the under frame. I was wondering if any of the Dapol diesel would have silimar buffers as these are availbe as spares.

Can anyone help in recommanding where I can get a couple of CL 20 buffers to replace a broken buffer

Thanks. I like the mineral wagons and the servo mount.

are any of the STL availble for download. They are very nice.

Hi Grahame. Nice build. Is this a self build. I am looking for some thing Like this. Where did you get it from.

The MN 6 pin version which is required for the 03 does not have stay alive support as stated on their web page. http://www.zimo.at/web2010/products/mn-nicht-sound-decoder_EN.htm Alan

If it the 08 with the Next 18 a Zimo STACO1 stay-alive kit will fit in the cab with a little bit of modification. Have a look at https://youchoos.co.uk/Index-Resource.php?L1=IG-Class08 Alan

Thanks for everybody comments. Most grateful. My issue now is trying to find a 6 pin decoder with stay alive that has a width of 8mm or less. I thik I will be hoping that the ESU Lokopilot will be avaible soon. New Zimo MN 6 pins no good. Now wider than the MX with no stay alive feature. Alan

any info on how the 08 was done. Woodenhead sorry about my big fingers

Does anybody have a recommandation for a stray alive for a Graham Farish Class 03 and 08. There is small amount of room in the cab. Biut all of the stray alive I have found seem a bit big.

Just a quick notice of excellent customer service from Leigh at Collet Models. Orded a couple of locos ,one Saturday and one today and have recieved a email to say that he has deducted one of the P&P charges and the items have been shipped today. Certainly now my first port of call for any new items. And a really good cost to go with it.

Which LED is it the DCC LED. I would check to make sure it is the right way round and the the solder is OK and you don,t have a dry joint.

once you programmed your first address did you press E to come out of Config mode. Have you tested the output in config mode to make sure all that is working. When out of config mode you should be able to see the address in the Mardec software.

without the sketch loaded the arduino will not the software for the dcc

I have 4 of these without any issues. Have you left it in config mode. Once you have done the setting up of your devices you need to press E to get out of config mode.

any chance of a full description of how you did it.

Has anybody yet upgraded the DR5000 with the YaMoRC YD9401. I asked a question to YaMoRC about the benfits of upgraihg and this was his reply. WiFi/WLAN accesspoint for standalone operation without the need for an external router LAN 100baseT Ethernet port to integrate the gateway in your home network Built-in Webserver for configuring and operating the DR5000 with no need for PC or Phone/Tablet installed Software or Apps. Just runs from any browser ! XpressNet-LAN, Z21®, LocoNet Binary, LocoNet LBServer, JMRI: WiThrottle YD.Command protocols on WiFi and LAN and … SIMULTANEOUS ! But with the module also comes a Firmware/Software update. This resolves a lot of DR5000 bugs and adds a lot of new functionality which Digikeijs does/can not make. Like e.g. up to 65 Loco-functions, new DCC-ext Accessory commands. I like to kow if people are going or think of upgrading.