disco-dave

Hi, Can anyone provide a wiring diagram for using bi-colour LED's on a mimic panel to show which way a point is set? What I'm trying to do is use the LED's show green for point set correctly and show red on the line that the point is not set for. I have the power from the track and a wire from the frog which changes to + or - depeding on the direction the point is set. I just need a wiring diagram to show how to wire it up so it works. I've had a search and have found how to do it for 3 pin red/green LED's, but not 2 pin. And as a novice I'm struggling to work it out. I realise you need resistors, but I'm also unsure which ones? The track is DCC using a NCE PowerCab. Any help or a point in the right direction would be appreciated. Cheers.

Hi, I'm wiring 6 Gaugemaster GM-500 relays to control the frogs on my points in my fiddle yard and I have question regarding the track feeds. In my picture these are the white and brown wires. Do they have to go to the toe of the point as per Gaugemaster's wiring diagram (uploaded), or can they just be connected to the track bus directly? Thanks for your help.

All the best for the show. If you can resist, try and use your dynamis a little bit as well

My local station. I'll follow this one with interest. Looks like a pretty good start to me.