technohand

Hello Dave, I didn't realise the coal tubs were half ton capacity. Are there any drawings in existance or do I have to work out sizes using density tables etc. Tony

Yes it is just nice looking at it isn't it but when other projects allow I'll have to bite the bullet and convert to EM and post 1907 Tony

Just taken delivery of the new Bachmann 0-4-4 Passenger Tank engine. I am not going to critisize it is too good for that. It is a lovely model and better than most people could do and is really good value for money. It has 3mm. driving axles and shouldn't be too difficult to convert to EM or P4. Period is 1907 renumbering with brass tank side numbers and simplified livery but easy to backdate to post Johnson date if wanted or post date to 1907 large numbers to Grouping. Worth Buying Tony

Dave I like it. Modelling midland three throws is a swine, I know ,I've tried in EM. I'me Building a shed layout as well but haven't got the space for 7mm. I too aim to be finished sometime in the late 20's. I live in hopes. Regards and stay safe in these troubled times. Tony

I do like the interlaced timbering on the point work. Quite common on Midland Branch lines and Goods Stations at the turn of the 20th Century and for some time afterwards. Tony

What all two of them!!!!!

Please remind me to engage brain before replying. Tony

I must agree. A picture of Princess Beatrice in the "British Single Driver" is what got me interested in the Midland Railway Co. That and trying to give up smoking!! Tony

Hi Eric. for some reason I've not been informed of updates. It's all looking good. Tony

Hi Steve, I tried printing out on A4 sheets and the pictures are OK. If better resolution is required they will print out full size in Pictures. Tricky if you are reading this as well section 6 (page6?) on the Midland Railway Company Post will give it to you. Regards Tony

Tricky can I go back to track work for a minute. I published drawings of Midland track work, Switches crossings and the dreaded three way switch in the topic Midland Railway Company. All info there except the radii of the turnout stock rails. Hope this helps Tony

At last the range of Midland Goods waggons is back with Slaters. Prices are Opens: £9.00 with VAT Vans and the Brake £12.00 with VAT Thank you Slaters

Hi Tricky had a bit of a senior moment with Southwold. I meant Southwell on the Newark Mansfield Branch of the Midland. Sorry about that. Tony

Good idea but most engine sheds on the Midland were pretty big but something like Wirksworth or Southwold might fit. Have a look in Loco Sheds of the LMS (Midland Division). I think that's the Title. Incidentally your modelling is superb. Regards Tony

Hi Steve Downloaded the information from the sources given. Very useful and makes hiding weights in trucks a lot easier.As i'm modelling a Goods Yard the comments regarding sheeting are very relevant so thanks. Tony

Agree Jol but I have to be careful Tony

There are now lists of available products on the following web site:http://www.midlandrailway.org.uk/modelling/. These currently cover 2mm,4mm and some 7mm scales. Regards Tony

Using aluminium angle is an easy way of getting everything lined up easily. Cut 3inch lengths of 1 inch angle if modelling in OO or you can go smaller, I use 15mm in EM. Gauge to your track and fix down with packing to rail height. You can then screw suitable lengths of the chosen angle to MDF backing and pack up to the same height as the rails. Use small bulldog clips to align and conduct current. Remember a lot of aluminium is anodized and this coating will have to be removed as it's an insulator. Good luck, it works for me and a lot of friends.

Me'a culpa should have gapped the undersides of the sleepers when I soldered the reinforcing strips underneath. My only excuse is that no one had ever (as far as I know) built stub points in 3.5mm/1ft scale before. In my defence no shorts were evident when I handed the points over. Glad its all turned out OK and hope Eric is still talking to me! Tony

We in the 21st century tend to look at the past thru rose colored specks. Lets face it any one involved in any engineering related industry in the late 19th early 20th centuries faced a hard dirty and dangerous existence. Life in the cloth industries was pretty awful as well and even living conditions were dire. Tony

Please Note if modellling to 12inch to the foot scale remember to drive keys in main direction of travel!! For those of us with smaller layouts here is a drawing from MRSoc. archives available to down load by Members of an 1896 Refrigerated van to Dia.372. As usual for commercial or publishing perposes permission must be obtained from the holders, THE MIDLAND RAILWAY STUDY CENTRE. Regards Tony

Different again but quite a well used subject,here is a drawing of a standard Midland Level Crossing Gate. It is a single gate sized for double track and manually operated by a crossing keeper. Checking the standard track formation drawings it appears to be sized to the edge of the formation. To complete the model a crossing keepers hut or cottage would be required and possibly a litch gate for pedestrians in those days of non existant elf and safety! Regards Tony

At the moment there are a few drawings that have been made available to me for publication on RM Web with a view to getting people interested in things Midland and hopefully build better models. I shall continue to publish them and thought that track was a logical place to start being the base of any fine scale model. Infrastructure is also important and the Midland had particular ways of doing things. I still feel that modelers would benefit from joining the Midland Railway Society and more and more information will be made available as it becomes digitised, obviously primarily to members. It is also important to remember that infrastructure lasted well into the Diesel period and so later period modellers can benefit. I hope this answers some of your questions. Regards Tony

Hello Steve Low Rydale is a might have been Midland Railway Goods yard in East Lancashire near Oldham. Foam insulation is allegedly considered superior to cork for sound proofing and allows the track to float and flex thus allowing a better chance of maintaining wheel contact and hence traction and current pick up. It tends to be used by the P4 fraternity, I thought I'd give it a try. Hope this answers the question. Tony,

Just ripped up all the track on Low Rydale to start again using foam insulation rather than cork. Also made the track layout more interesting. My Grandson is going to throw a wobbler!!