Jump to content
 

michaelp

Members
  • Posts

    1,422
  • Joined

  • Last visited

Everything posted by michaelp

  1. A few miles down the road from Fenwick Pit the winding house at Seghill Colliery can still be seen.
  2. That's great thanks, all I have to do now is find one!
  3. Personally I would adjust the curves as the others have suggested.
  4. Was there ever an issue that covered the Class08/09 shunters?
  5. Bates Colliery in Northumberland had at least one, I got a ride in it once.
  6. I am currently building some of the above wagons but have lost a few of the wheel bearings, can anyone tell me which ones I need please? Thanks in advance.
  7. I have already tried that, the result is the same but thanks for the suggestion.
  8. Thanks for your reply and the offer of help Mick, before I cleaned the airbrush I put some white spirit in the paint cup, put my finger over the nozzle end and work the trigger back and forth, air bubbles could be seen forming in the cup but not bubbly as usual.
  9. Thanks for your reply John I will get some thinners.
  10. I was using my Iwata HP SB Plus airbrush earlier and noticed that the paint flow seemed to reduce a bit, this happened until the cup was empty. I am normally ok mixing paints, I only use Humbrol Enamel paints thinned with white spirit. After I had finished I cleaned the airbrush the same way as I always do, later today I went to use it again and I usually blast some white spirit through first before adding the thinned paint but no white spirit would flow through. I am guessing that the nozzle is blocked but I dont know how to unblock such a small nozzle, it is currently lying in some white spirit. Any advice would be much appreciated. Thanks in advance Michael
  11. Road To Nowhere - Talking Heads
  12. Really enjoyed this, thanks for posting.
  13. He Ain't Heavy, He's My Brother - The Hollies
  14. Roll Away The Stone - Mott The Hoople
  15. The Humbrol colour looks like a very good match to me.
  16. If Paradise Is Half As Nice - Amen Corner
×
×
  • Create New...