Jump to content
 

pauln

Members
  • Posts

    296
  • Joined

  • Last visited

Everything posted by pauln

  1. Couple of Farish Class 170s at £109. South West Trains https://railsofsheffield.com/products/graham-farish-371-427a-class-1703-170308-south-west-trains-2-car-dmu?utm_source=Klaviyo&utm_medium=campaign&_kx=8FbICCPFDUyeLpqy8t5fgmmUyhFIpFXddDYFt8wwG-E%3D.RXkVMS London Midland https://railsofsheffield.com/products/graham-farish-371-432a-class-1705-no-170501-london-midland-2-car-dmu?utm_source=Klaviyo&utm_medium=campaign&_kx=8FbICCPFDUyeLpqy8t5fgmmUyhFIpFXddDYFt8wwG-E%3D.RXkVMS
  2. Thanks Jim. Just bought sound fitted Bachmann 32-740SF Class 66/7 667789 British Rail Large Logo for £175 which seems reasonable. They seem to be still in stock. https://www.bourtonmodelrailway.co.uk/p/Bachmann-32-740sf-class-667-667789-british-rail
  3. Very helpful (and reassuring). Thanks to you and the other responses to my comment.
  4. That's an impressively well finished shed. I would be interested how you find the heat variations and the effect on the layout. I've always resisted considering a shed for the layout because of concerns it might always be too hot or too cold.
  5. An update. A photo below of the affected part from the Merchant Navy US Lines. I contacted Hornby in May asking about replacements. They replied they were waiting for stock and after a few chases I got confirmation that they are back in stock now and 2 replacement bogies arrived just before Christmas.
  6. That looks better than my efforts by a mile. I will have to start again and see if I can do better. I couldn't even work out how to stop the red light from illuminating at the same time as the white lights (it worked ok with the old bulb)
  7. Another one to add. Some of the Merchant Navy locos are on the list already but I have just found my United States Lines 35012 from the Orient Express set has the bogie rot issue - just fell apart in my hands. I don't think the loco has a catalogue number but the box set is R1038.
  8. Thanks for the reply and your patience in answering questions. All wired up as per the left hand drawing. I connected the lamp in effect between C and D. I tried swapping b and d over; the problem did move to the other LED. I will just try reversing the LED polarity although I'd already swapped the LED out so would have to have got it wrong twice. WIll also replace the resistor. It's all good practice! I have run out of decoders so I will order a couple more and try a new one as well. Paul
  9. Hi all, Follow up to the request for help. I managed to wire up a TCS M1 decoder with the harness cut off and the loco runs (well). I even wired up some new LEDs for the headlights with a resistor on each. However ... whilst the light at one end works fine (only on in direction of travel) the other end doesn't work at all. The LED is definitely working. One curious thing (which to anybody with an understanding of electronics may help) is that placing two wires and a bulb across the + and - wires leading to the LED result in the LED turning on. Any ideas please?
  10. That's amazingly helpful. Thank you. I will give that a go this week.
  11. Hi, Please could anybody point me to a few pics or video that explain how to DCC fit this Hornby 56. The motor and wiring looks rather different to the guides for fitting DCC to Ringfield motored locos. I can't see any guides on here that show this particular type. Thanks
  12. Went out for a first ride on some 745 and 755s on Friday. Missed all the excitement with 424 ... except for the knock on delays. Quick photo of 755412 waiting to leave Ipswich for Beccles.
  13. Great. Thanks for the info Paul. I have spotted second hand copies of a couple of those online so will follow up.
  14. All round to yours then? Seriously though I see a few Rhatische Bahn books on the shelf. Any you'd recommend please? I assume they are all in German?
  15. Stunning layout. Would like to see this in the flesh. Hopefully before 2019.
  16. A really good issue from what I have read and skimmed so far. At least some of the "best buy" items are things I probably wouldn't have noticed just from browsing websites.
  17. Thanks for the pics bigherb. Any more ? Looks like the railway track didn't go into the quarry here or has it just disappeared.
  18. That Leyland Titan really needs a new set of blinds. 119 ?
  19. Unwrapped my largo logo version this morning with some trepidation considering all the comments. On the plus side there don't seem to be any loose bits on my model but does look like the couplings are upside down. I haven't seen many photos of this version so here is one. Am I right in saying that I can fix the headcode light issue with some CV changes (CV33 and 34? for a Hattons DCR chip).
  20. For anybody thinking of fitting a sound decoder to their thumper I can highly recommend bif's version. Takes a bit of getting used to in order to get the engine revs up without the unit speeding up but I like it so much I leave it ticking over even when not in use (and I can't help but set the compressor running rather more often than necessary). I just wish I'd got the sound decoder fitted to my second one too.
  21. Thanks Keith. And just to close out my report I have installed a Hattons own brand 21 pin decoder and that too works just fine. So looks like only Hornby Sapphire chips to avoid.
  22. I think you must have too many layouts by now, no? I think it should stay closest to the real location but I would say that at just under 4 miles according to google.
  23. An update on my issue (and related to Tetsudofan/Keith's by the look of it). My original one has gone back and the replacement arrived this morning having only been ordered on Saturday (well done Hattons). I dropped in a chip and had exactly the same problem as described above, only this time in both directions. Setting the speed to 6/28 or below means it crawls round the layout without exhibiting the same behaviour but a nudge up to 7 and we're back to above. Both of the chips I tried were Hornby Sapphire which run well in everything else I own (and are handy as they can be 8 or 21 pin). So, I thought I'd extract a 21 pin sound decoder out of a Bachmann loco and with that the Bo-Bo runs perfectly in both directions. So conclusion is that the loco does not like certain chips for some reason. Suggestions welcome. Bear this in mind when purchasing and choosing a chip.
  24. One of my favourite layouts. Will look out for it on the exhibition circuit.
×
×
  • Create New...