G-BOAF Posted June 18, 2019 Share Posted June 18, 2019 (edited) 14 minutes ago, scots region said: Plus, it's hardly likely that you'd want to hang any weight off of a £200+ model. I beg to differ. I picked up an extra Bachmann Shunters truck when KMRC were flogging them at £5 (compared to RRP of £31.95 for latest batch!!!!), as a demo lift for my crane. Its light, but will look good. I'd be disappointed if it can't handle this without damage. I don't think I would try anything heavier; maybe a van body shell or something. Edited June 18, 2019 by G-BOAF Link to post Share on other sites More sharing options...
Gibbo675 Posted June 18, 2019 Share Posted June 18, 2019 9 minutes ago, G-BOAF said: I beg to differ. I picked up an extra Bachmann Shunters truck when KMRC were flogging them at £5 (compared to RRP of £31.95 for latest batch!!!!), as a demo lift for my crane. Its light, but will look good. I'd be disappointed if it can't handle this without damage. I don't think I would try anything heavier; maybe a van body shell or something. Hi There, If Bachmann have built there crane as well as Ransome Rapier built the originals then it should be able to lift 103.338 grams based on the fact that mass would be the cube of 76.2 (442450.728) and the working limit of the real thing is 45 tons or 45722000 grams in metric. Obviously you will have to deploy the propping girders to there fullest extent, take into account any track elevation should there be any and also add the mass of any lifting strops, chains, shackles or beams to the mass to be lifted. Gibbo. 1 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Enterprisingwestern Posted June 18, 2019 RMweb Gold Share Posted June 18, 2019 5 hours ago, craneman said: Note the herringbone spur gear (directly in front of the scrapper's right foot), a classic characteristic of a Craven crane. Very expensive to manufacture, and very rarely found on any other make. Can't be a lot wrong with it, Andre Citroen made his money with it, it's the cars wot did 'im. Mike. Link to post Share on other sites More sharing options...
G-BOAF Posted June 18, 2019 Share Posted June 18, 2019 58 minutes ago, Gibbo675 said: Hi There, If Bachmann have built there crane as well as Ransome Rapier built the originals then it should be able to lift 103.338 grams based on the fact that mass would be the cube of 76.2 (442450.728) and the working limit of the real thing is 45 tons or 45722000 grams in metric. Obviously you will have to deploy the propping girders to there fullest extent, take into account any track elevation should there be any and also add the mass of any lifting strops, chains, shackles or beams to the mass to be lifted. Gibbo. But Rapier used steel cables. Bachmann are (AFAIK) using cotton thread, or maybe Nylon. Either way, forces on this particular component may not scale. I think that will be the weak point in the model Link to post Share on other sites More sharing options...
Gibbo675 Posted June 18, 2019 Share Posted June 18, 2019 11 minutes ago, G-BOAF said: But Rapier used steel cables. Bachmann are (AFAIK) using cotton thread, or maybe Nylon. Either way, forces on this particular component may not scale. I think that will be the weak point in the model Hi There, Having worked upon both a Craven Brothers 50 ton and a Cowans Sheldon 76 Tonne cranes I would suggest that when taking the safety factor of the ropes into consideration then pretty much any crane you may care to mention would have capsized well before the ropes break. The next most likely failure mode would be from jib buckling which is usually due to the inertia of a swinging load that has not been allowed for when slewing, not sure how you would manage that with 103.338 grams. Gibbo. 2 1 Link to post Share on other sites More sharing options...
G-BOAF Posted June 18, 2019 Share Posted June 18, 2019 1 minute ago, Gibbo675 said: Hi There, Having worked upon both a Craven Brothers 50 ton and a Cowans Sheldon 76 Tonne cranes I would suggest that when taking the safety factor of the ropes into consideration then pretty much any crane you may care to mention would have capsized well before the ropes break. The next most likely failure mode would be from jib buckling which is usually due to the inertia of a swinging load that has not been allowed for when slewing, not sure how you would manage that with 103.338 grams. Gibbo. OK in 1:1 scale, but what about stretching/breakage in 1:76. I guess given the hook itslef is double blocked, should be OK, but I'd be more worried about stretching of cables on the model that ruin the tensioning. Link to post Share on other sites More sharing options...
Gibbo675 Posted June 18, 2019 Share Posted June 18, 2019 21 minutes ago, G-BOAF said: OK in 1:1 scale, but what about stretching/breakage in 1:76. I guess given the hook itslef is double blocked, should be OK, but I'd be more worried about stretching of cables on the model that ruin the tensioning. Hi There, Get your self some cotton sewing thread and see how hard you can pull it before it breaks or cuts into your fingers, alternatively tie it around things such as half house bricks and see if you are able to pick the item up. Remember that each time the fall of the rope is reeved through the block the amount that the ropes at the hook end will pick up increases by the rated value of the rope. My home made jib attached to my C&S 75 Ton picked up a Lima 08 although I had to keep a finger on the carriage. Whatever you do, don't over think the job ! Gibbo. 1 Link to post Share on other sites More sharing options...
G-BOAF Posted June 18, 2019 Share Posted June 18, 2019 1 hour ago, Gibbo675 said: Hi There, Get your self some cotton sewing thread and see how hard you can pull it before it breaks or cuts into your fingers, alternatively tie it around things such as half house bricks and see if you are able to pick the item up. Remember that each time the fall of the rope is reeved through the block the amount that the ropes at the hook end will pick up increases by the rated value of the rope. My home made jib attached to my C&S 75 Ton picked up a Lima 08 although I had to keep a finger on the carriage. Whatever you do, don't over think the job ! Gibbo. fair point! 1 Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted June 20, 2019 RMweb Gold Share Posted June 20, 2019 (edited) I think the dublo crane will outlift anything other crane in oo. Edited June 20, 2019 by adb968008 Link to post Share on other sites More sharing options...
Pre Grouping fan Posted June 30, 2019 Share Posted June 30, 2019 Some pictures of the SR Grey model pictured at the Bluebell Railway model railway weekend. The zoom has reduced the quality of the image but the quality of the model still shines 9 1 Link to post Share on other sites More sharing options...
craneman Posted June 30, 2019 Share Posted June 30, 2019 Cracking photos, thanks for posting them. The quality of the model far exceeds the awareness of the people who pose the models for display. You wouldn't last long as a driver if you ran the hook block into the jib-head sheaves like that. But at least the jib runner is the right way round this time! 3 Link to post Share on other sites More sharing options...
Pre Grouping fan Posted July 1, 2019 Share Posted July 1, 2019 Indeed its not until you get to look at one up close you realise the detail that's been put into this project. Its very nice to see the safety chains, screw couplings and vacuum pipework present on the buffer beams. Sadly I didn't get a chance to ask whether these are user fit or fitted as standard. I wonder if the hook block is as it would be supplied in the packaging as I remember someone saying it needs to be under tension to stop the rigging becoming a mess in transit. Link to post Share on other sites More sharing options...
Ardglen Posted July 2, 2019 Share Posted July 2, 2019 Forgive me for going off topic, can anyone tell what the building is in front of the crane (which is a superb model...) Link to post Share on other sites More sharing options...
Pre Grouping fan Posted July 2, 2019 Share Posted July 2, 2019 1 hour ago, Ardglen said: Forgive me for going off topic, can anyone tell what the building is in front of the crane (which is a superb model...) Its the Graham Farish version of Sheffield Park Station. Only just been made available in N after the OO version from a few tears back. Link to post Share on other sites More sharing options...
Jack P Posted July 2, 2019 Share Posted July 2, 2019 Oh . I was really hoping I wouldn't like the look of the crane in SR grey! 2 Link to post Share on other sites More sharing options...
phil gollin Posted July 3, 2019 Share Posted July 3, 2019 . Did the Southern Railway not paint the yard allocation on its cranes ? . Link to post Share on other sites More sharing options...
GreenGiraffe22 Posted July 3, 2019 Share Posted July 3, 2019 I too enjoyed seeing the crane in the flesh at the Bluebell =) I recently got a quote for my solicitor fees for buying my first house... Safe to say I am at ease with the cost of this model I get to keep for life :') 1 Link to post Share on other sites More sharing options...
craneman Posted July 3, 2019 Share Posted July 3, 2019 9 hours ago, phil gollin said: . Did the Southern Railway not paint the yard allocation on its cranes ? . Not in the grey era (at least there's no evidence of it). Later, in the black and later red eras, it did. 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Zero Gravitas Posted August 7, 2019 RMweb Gold Share Posted August 7, 2019 (edited) Just received an email from Hatton's unilaterally cancelling my pre-order... Any one else had this? Edit to add - all versions appear to have been removed from the Hatton's website... Edited August 7, 2019 by Zero Gravitas More information 1 Link to post Share on other sites More sharing options...
B15nac Posted August 7, 2019 Share Posted August 7, 2019 Yea me as well what's it all about? Link to post Share on other sites More sharing options...
Pre Grouping fan Posted August 7, 2019 Share Posted August 7, 2019 its a long standing issue between them. Looks like Bachmann aren't supplying them anymore. So its not just affecting the crane 1 Link to post Share on other sites More sharing options...
nerron Posted August 7, 2019 Share Posted August 7, 2019 Seems that all Bachmann items shown as "pre-order" have been deleted. e.g. the Midland 0-4-4Ts and the new livery D11s. Link to post Share on other sites More sharing options...
MarkSG Posted August 7, 2019 Share Posted August 7, 2019 Yes, I've just had the same thing. No crane, no Johnson 0-4-4T. And Hattons are no longer listed as a stockist on the Bachmann website. Something odd is obviously going on here. Which is probably beyond the scope of this thread, so I'll leave it there. Link to post Share on other sites More sharing options...
RMweb Gold Dunsignalling Posted August 7, 2019 RMweb Gold Share Posted August 7, 2019 (edited) 23 minutes ago, MarkSG said: Yes, I've just had the same thing. No crane, no Johnson 0-4-4T. And Hattons are no longer listed as a stockist on the Bachmann website. Something odd is obviously going on here. Which is probably beyond the scope of this thread, so I'll leave it there. Also, Bachmann is no longer listed in Hatton's list of manufacturers under "Future Releases". Nothing odd about it, the two companies have evidently concluded that their dispute (the roots of which were fairly obvious from the beginning, despite neither party spelling it out) will not be resolved in the foreseeable future and they have decided to cease dealing with one another. At least Hatton's action has made it clear to us, as customers, exactly where things stand. John Edited August 7, 2019 by Dunsignalling Link to post Share on other sites More sharing options...
Moderators AY Mod Posted August 7, 2019 Moderators Share Posted August 7, 2019 52 minutes ago, MarkSG said: Yes, I've just had the same thing. No crane, no Johnson 0-4-4T. And Hattons are no longer listed as a stockist on the Bachmann website. Something odd is obviously going on here. Which is probably beyond the scope of this thread, so I'll leave it there. 1 hour ago, nerron said: Seems that all Bachmann items shown as "pre-order" have been deleted. e.g. the Midland 0-4-4Ts and the new livery D11s. 1 hour ago, Pre Grouping fan said: its a long standing issue between them. Looks like Bachmann aren't supplying them anymore. So its not just affecting the crane 1 hour ago, B15nac said: Yea me as well what's it all about? 1 hour ago, Zero Gravitas said: Just received an email from Hatton's unilaterally cancelling my pre-order... Any one else had this? Edit to add - all versions appear to have been removed from the Hatton's website... See https://www.rmweb.co.uk/community/index.php?/topic/145752-hattons-bachmann-new-stock-cancelled-pre-orders-07-aug/&do=findComment&comment=3634481 Please keep any product topics to the product rather than the retailer otherwise every Bachmann topic will become a mess. 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now