Jump to content
 

'Cambrian Street'


BobM
 Share

Recommended Posts

Evening guys.....

Just a slight update this evening.....

 

Whilst there is a little further slight filing to be done to neaten some of the joins to allow a tighter fit......I have done the preliminary cutting from plasticard forming the intended back walls to the footbridge gangway span and just to see what the effect may be to the look of the bridge, have just placed these in position with a bit of blu-tack (other fixatives are available).......

 

Currently I have don't have a light stone enamel paint to colour the panels, so until that is resolved (which won't be too long) I won't be able to obviously paint them, fix into position permanently and finally blue the bridge together....

 

So far, if I don't muck this up, I am quite 'chuffed' with this and truly amazed that I've actually managed it and moreover that I had the courage to start hacking away at the two Bachmann models in the first place!

 

104_5504.JPG.6e7e35b933f550d75ef15c62944aaca5.JPG 104_5503.JPG.5fadc00d797c12e8fdda5647a7776e71.JPG 104_5501.JPG.cac2b3aa57b06b54002c5763351cfa6d.JPG

104_5500.JPG.9831451c01d1a0faa216d069d7df9273.JPG 104_5497.JPG.52c775cd4c983f4bfbd3f1741be0337f.JPG

 

Regards always.....

Bob

Edited by BobM
  • Like 11
  • Craftsmanship/clever 2
Link to post
Share on other sites

10 minutes ago, lezz01 said:

Would you not paint them cream Bob? To match the woodwork on the end of the stair canopies?

Regards Lez.

 

Hi Lez 

Thinking of a total repaint....a hangover from GWR days so I can weather it up a bit...?

Regards always

Bob

  • Like 1
Link to post
Share on other sites

Hi 

Another muse for you regarding the bridge....

Taking inspiration from Wiggoforgolds wonderful work on Yalerton....thinking of adding wind screens to the corners of the bridge landings at the top of the steps, that were seen on many GWR examples.....?

3410888_05de55a3.jpg.0fef0bbd99ab4c1bf92b8551c3642d5a.jpg

Wiggo's build below...

DSCF1945.jpg.84021fc359afd6939cb707a4f4ea94ff.jpg.dac2f8353718b5cc7b872e4f70b69adc.jpg

Perhaps adding plasticard here to mine...?

104_5504a.jpg.0c855b2688fea4bfb6706128b314b72f.jpg

104_5488a.jpg.56193cfa0a80a7ad15c16d9be29037f8.jpg

 

Just a thought...quite like the effect personally and makes design sense...?

Regards always,

Bob

Edited by BobM
Link to post
Share on other sites

  • RMweb Gold

Sounds like a plan Bob. I'm not really a GW man mate. Although I do like some of the DF locos and the broad gauge of course but not all things BG were GWR. The Midland didn't tend to cover their footbridges as far as I know, no doubt now someone will post a pic of a covered Midland footbridge just to prove me wrong. There is a prototype for everything after all.

Regards Lez. 

  • Friendly/supportive 1
Link to post
Share on other sites

  • RMweb Gold
2 hours ago, BobM said:

Evening guys.....

Just a slight update this evening.....

 

Whilst there is a little further slight filing to be done to neaten some of the joins to allow a tighter fit......I have done the preliminary cutting from plasticard forming the intended back walls to the footbridge gangway span and just to see what the effect may be to the look of the bridge, have just placed these in position with a bit of blu-tack (other fixatives are available).......

 

Currently I have don't have a light stone enamel paint to colour the panels, so until that is resolved (which won't be too long) I won't be able to obviously paint them, fix into position permanently and finally blue the bridge together....

 

So far, if I don't muck this up, I am quite 'chuffed' with this and truly amazed that I've actually managed it and moreover that I had the courage to start hacking away at the two Bachmann models in the first place!

 

104_5504.JPG.6e7e35b933f550d75ef15c62944aaca5.JPG 104_5503.JPG.5fadc00d797c12e8fdda5647a7776e71.JPG 104_5501.JPG.cac2b3aa57b06b54002c5763351cfa6d.JPG

104_5500.JPG.9831451c01d1a0faa216d069d7df9273.JPG 104_5497.JPG.52c775cd4c983f4bfbd3f1741be0337f.JPG

 

Regards always.....

Bob


Great work Bob, really impressive

 

Chris

  • Friendly/supportive 1
Link to post
Share on other sites

Evening Guys....

Hope that your respective weekends have been good and everyone is well....?

Have added the extra 'windscreen' pieces to the end steps at the top of the landings, forming these from small squares of plasticard...cannot insert the central landing piece until the bridge is joined together.

 

104_5520.JPG.f5b91182b5e8a79def74d521e8ac545b.JPG 104_5517.JPG.a84571d3629a19f389f58ba42eb74679.JPG

 

Regards always.....

Bob

Edited by BobM
  • Like 8
Link to post
Share on other sites

  • RMweb Gold

Looks great* (*understatement)

 

I do like how you’ve taken ‘off the shelf’ items and made it your own. I’m really looking forward to seeing the finished article

 

I’m beginning to wish I’d got more than one platform now :rolleyes:

 

Chris

  • Friendly/supportive 2
Link to post
Share on other sites

17 minutes ago, chuffinghell said:

Looks great* (*understatement)

 

I do like how you’ve taken ‘off the shelf’ items and made it your own. I’m really looking forward to seeing the finished article

 

I’m beginning to wish I’d got more than one platform now :rolleyes:

 

Chris

 

Thanks Chris.....

I'm amazed I have the courage to start hacking away at something to fashion it into something else!

Cheers for all the kind comments.....I am going to attempt to join the two together (when the appropriate epoxy glue has been purchased) next when I've completed the final filing , then the joins will have to be filled, finally painted up.....but that may be some way down the line as I'll have to start connecting the remaining points to te wire control, so I'm going to have to regain the practice of wire in tube....!

 

Have a good week.....

Regards always...

Bob

Edited by BobM
  • Like 2
Link to post
Share on other sites

Hi

A final posting this evening......just to see how it looks, but will further 'fettling' required....looks okay...?

 

104_5521.JPG.bc8f3f8c0df862546328744667e25bb8.JPG 104_5525.JPG.ec0152e8d61407f7bab591434dc1f148.JPG 104_5531.JPG.491895a1b8ed93144a13b677055c23a9.JPG

Cheers everyone for your continued kindness....

Regards always,

Bob

  • Like 9
  • Craftsmanship/clever 2
Link to post
Share on other sites

9 hours ago, lezz01 said:

It looks fab Bob. Much better than two seperate bridges isn't it?

Regards Lez.

 

Cheers Lez......

Indeed yes, thank you for the initial suggestion to have a single span across the three platforms....have gained a greater understanding of modelling as a result and a feeling that everything doesn't need used as they come straight out of the box?

 

Have agood week.....

Regards always.

Bob

Edited by BobM
  • Like 1
  • Agree 1
Link to post
Share on other sites

Evening Guys.....

There's something very intriguing regarding this bridge I'm currently working on, seemingly it appears the more that I attempt to ensure a closer fit, and this is achieved, the further I want to make the marrying up even neater.....prior to this I would have been happy with the initial result and moved on...?  

 

I don't want to 'over egg the pudding' as it were by getting as neat a fit as I can now without relying too much on filling any gaps later but really feel that I've gained something positive from this process?

 

Nearly there and closer to a stage where I can consider painting,

 

Regards always,

Bob

Edited by BobM
  • Like 1
Link to post
Share on other sites

28 minutes ago, lezz01 said:

Uh Oh. I feel scale 4 coming on.

Regards Lez.

 

Haa Haa Lez,

 

I joined Scale 4 many months ago just for the superb magazine, the societies website for the information and hugely helpful advice provided.....sleep soundly my dear pal,  your perfectly safe, I'm not venturing into those waters just yet a while....!

 

Still...trying to obtain a closer fit on the roof 

104_5534.JPG.5d344f671777212649e86200f143c545.JPG

 

Regards always

Bob

Edited by BobM
  • Like 2
Link to post
Share on other sites

  • RMweb Gold

One of the things that makes a good modeler Bob, is knowing when to stop. If I were you I would stop filing, stick it together and then fettel it from there. A little filling and shaping followed by a good paint job should just about do it mate.

It's a shame we don't live a bit closer to each other Bob. If we did I would suggest a collaboration on an exhibition layout based on Tewksbury shed and quay branch in P4. I love finescale track building. I just don't have the space for what I want in P4.  

Regards Lez.   

  • Friendly/supportive 2
Link to post
Share on other sites

Hi....

Will probably place an order for required paints from Precision Paints next week in readiness for final assembly  and repainting in the near future.

 

Will turn my attention to next phase of attaching control wires to the points across the station area, so that I can get the platforms formed up and in position....?

 

Regards always...

Bob

  • Like 1
Link to post
Share on other sites

  • 2 weeks later...

Hi....

Been a bit busy with one thing or another, mainly at the nursery what with Christmas stuff and all that, so layout has 'gone quiet' for now.....but will resume soon....

As an aside maybe I should alter my profile pic, as just for fun went through the questions on a friends phone app that 'calculated' what Disney character you would be...?

Look what my personal traits lead us to.....!

 

545959_1298658944996_400_300.jpg.0e179de17d964334944fe87ba620fad5.jpg

 

Quite happy really :D

 

Regards always....

Bob

  • Like 4
  • Funny 1
Link to post
Share on other sites

Hi....

In the January issue of Hornby magazine there's an insert on tips for modelling the Western Region, .....right up my street...?

 

104_5546.JPG.130d1b7b230362d7b0eaf95099e348c8.JPG  104_5547.JPG.c2dca51e560c7500b05d051a40db1739.JPG

 

Regards always....

Bob

  • Like 3
Link to post
Share on other sites

Just having a flick through mine Bob. Admittedly I've not read it properly yet, but it seems a few western region locos have been missed off the list at the back perhaps? The venerable Manors produced by bachman and earlier by mainline appear to be missing? 

 

John 

  • Friendly/supportive 1
Link to post
Share on other sites

 

I know it's a tad early perhaps, but just in case to all my dear pals ....the sentiment to all of you in this song...!

 

 

 

 

HAVE A GREAT CHRISTMAS....!

 

Regards always...

Bob

  • Like 2
  • Thanks 1
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...