RMweb Premium Annie Posted November 17, 2019 RMweb Premium Share Posted November 17, 2019 Always good to see a clever piece of scratchbuilding Mr Northroader. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Mikkel Posted November 17, 2019 RMweb Gold Share Posted November 17, 2019 Another one! You seem to be building locos as fast as if they were wagon kits I'm sorry to hear your better half had to go through an operation, best wishes to you both. 5 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted November 17, 2019 RMweb Gold Share Posted November 17, 2019 I trust your good lady is recovering well. The loco looks very impressive you cannot have had much time to do it. Don 4 1 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 17, 2019 Author RMweb Premium Share Posted November 17, 2019 Thanks for your kind wishes, both, it’s a job that will take a few weeks to mend, but she is coming along. In the meantime I’m just opening boxes and shoving them in the oven. Isn’t washing clothes a high tech operation? Actually, Don, that loco must have been five years on the go so far, it has had a long rest period and a change of direction, but has ended up coming to the top of the pile for now. 3 2 Link to post Share on other sites More sharing options...
Nearholmer Posted November 17, 2019 Share Posted November 17, 2019 Best wishes to Mrs Northroader, and you have my empathy on the cooking, and washing front - I had to greatly increase my competence, or at least my level of effort, in those departments when Mrs Nearholmer was unwell for the whole of last winter (treatment successful, thankfully). 1 1 Link to post Share on other sites More sharing options...
Charlie586 Posted November 17, 2019 Share Posted November 17, 2019 Best wishes to Mrs Northroader. Nice looking loco, the little springs on the inside for the pick ups look a work of art. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Andy Hayter Posted November 17, 2019 RMweb Premium Share Posted November 17, 2019 Best wishes from me as well. Never easy to cope with such distractions from "normal" life. 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Annie Posted November 18, 2019 RMweb Premium Share Posted November 18, 2019 Best wishes from me as well for Mrs Northroader. Caring for a loved one who isn't well can be a challenge at the best of times so some best wishes from me to you also sir. 3 1 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 18, 2019 Author RMweb Premium Share Posted November 18, 2019 (edited) I showed the get better messages to my wife this morning, and she’s quite tickled that I’m on a thread populated with kind, warm human beings. Thanks from both of us for the good will. Charlie was interested in pickups, so I’ve drawn a sketch showing the three types I’m using. The first type I tried is top left, the Slaters pickup. This has a plastic top hat housing a sprung plunger, and a tag is fixed on the tail of the plunger. My first attempts I gave up trying to fit the tag with the rest in place, it was too inaccessible, so I soldered the lead straight on to the tail. The problem here is the heat can run down the tail and you end up with with the spring melting into the top hat, not what you want to happen at all. I then tinned the tail before assembly, and gave a very fast dab with the soldering iron to secure the lead. I’ve now eventually worked out the right way is to tin the tag, and put the whole lot together on the workbench away from the frames, as it is quite possible to feed the tag through the hole in the frames, then press the assembly into position, before a quick dab on the tag to join the lead. What a pill**k, you say. The unit is simple, compact, and works well, the only thing I can moan about is the price, but I’m glad to report I’m starting to realise you do get what you pay for, after years of skinflinting. The second type is the home produced pickup. The plunger is just a piece of brass rod rounded off, and it has a length of 28 s.w.g. phosphor bronze wire wrapped round it, then soldered to it. Phosphor Bronze is a nice springy material, you can get it from Eileen’s Emporium at shows. This is then bent to form an oval shape with rounded ends, and overlapping. To guide the plunger through the hole in the frameplate and insulate it there’s a piece of plastic tube wth a push fit in the hole.The tube is some I got from a model aircraft shop used to guide control cables, but you can also use the tube from inside a biro pen. A pad is then lined up with the hole, formed from a piece of copper clad insulation board. I use the sort made from fibre glass, as it’s much tougher than the other sort which is some kind of resin base, and can be sheared through with tinsnips without cracking and crumbling. The frame plates are tinned, anyway, and part of the frame erection process has the pads, tinned, placed in position and secured using heat applied behind the back of the frame. The guide tubes are pushed in, then the plunger assembly aligned up and the leg at the end of the oval loop is tacked to the pad. It needs some care to get the plunger square and central in the guide, and moving freely. The last type is pictured below the other two, and was used on the Buckjumper which recently appeared. The pads are mounted on the outside of the frame, tucked away discreetly just under the footplate, and I should add it’s always best to chamfer the pad edges to avoid any shorting. The pickup is just a long whisker of 22 s.w.g. P.B. wire, with one end bent into a loop, which is then formed with a hump, so that it rides on the crest of the wheel flange, and follows any sideways movement. There’s a thicker wire used here because it has less support than the other way I’ve described. Usually there’s an extra long pad incorporated somewhere so the wires from the pickups can terminate and there’s just one feed wire on to the motor. Edited November 18, 2019 by Northroader 7 1 1 Link to post Share on other sites More sharing options...
RMweb Gold ChrisN Posted November 18, 2019 RMweb Gold Share Posted November 18, 2019 Give my regards to your wife as well, and I hope she recovers quickly. 1 1 Link to post Share on other sites More sharing options...
Charlie586 Posted November 18, 2019 Share Posted November 18, 2019 Thanks for explaining the pickups. The second reminded me a bit of a watch spring when I saw it. It's a very clever design. There's enough room in broad gauge frames to try to recreate it. Could the third version scratch the back of the wheel if the wheel had little side play, or would that be less reliable? 2 Link to post Share on other sites More sharing options...
RMweb Gold Mikkel Posted November 19, 2019 RMweb Gold Share Posted November 19, 2019 Thanks, that's a very good and clear illustration of pick-up arrangements. Even Jim McGeown couldn't have explained it so well. Just one small issue: I think you'll find that everything runs better if the wheels are in vertical position. 2 1 1 Link to post Share on other sites More sharing options...
Simond Posted November 19, 2019 Share Posted November 19, 2019 Another approach to pickups which I have found to be pretty much ideal since learning of it: I used a lathe because I have one. If you don’t, finding telescoping plastic and brass tube is a way to achieve the same approach. hth Simon 3 1 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 19, 2019 Author RMweb Premium Share Posted November 19, 2019 (edited) First of all, thanks for the best wishes to my wife, Chris, actually her maiden name is Price, another of the clan, so need I say more? Looking at Charlie’s idea to apply the pickup in the third scheme to the back of the wheel rather than the top of the flange, you need to have some spring pressure on the pickup to follow the wheel as it moves slightly from side to side. This pressure makes the pickup try to follow the rotation of the wheel as well, so it needs supporting close to the place where it’s rubbing to stop this. With a long whisker there’s no real support to stop this and it can get easily displaced. You can up the thickness of the wire to give more stiffness, but this will also give more drag to the wheel. With a plunger guided by a bush in the frames you do get the support. I’m talking O sizes here, in OO it’s very common to have a strip, rather than a wire, behind the wheel flange. With this you’re getting enough spring to stay in contact with the wheel, but the depth of the strip adds some stiffness to stop the pickup getting pushed sideways by wheel rotation. You can get P.B. strip from Eileen’s as well, I think I’ve used it on a tender before now. I like the pickups you’re using on the Duchess, Simon, the idea of mutually pushing out the pickups from each other across the frames is a very neat solution, but has always beaten me by the need to keep them insulated from each other. Your way of doing it is very neat engineering, as is the whole loco, I’m afraid I’m incapable of workmanship as good as that. Generally my locos have to be happy to get three axles and no more, and be designed using the some principles as Boadicea used making her chariot. Mikkel, I’m not a Jim Geown, he’s a great guy, and currently I’m making up coaches from his kits, and they do look good. The thing is, if you have the wheels sideways and can go fast enough, you’re well on the way to a nice compact circular Wall of Death layout. Edited November 19, 2019 by Northroader 4 1 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 27, 2019 Author RMweb Premium Share Posted November 27, 2019 (edited) There was this bloke called this week, an avuncular look about him, going bald, neat little ‘tache, and I gather Annie thinks the world of him, so I invited him in and showed him the loft. He looked round, shook his head, pursed his lips, and made out a report, which he gave me before rushing off to some firm he called I.C.I.? The report’s called “The Reshaping of Bob’s Railways” I gather there’s too many layouts in the loft, and I should rationalise by going from four to two (there’s a vague one I haven’t run a thread on) It all makes sense, I suppose, so see how I get on, with reports on what’s happening, when it happens, if it happens. Edited November 27, 2019 by Northroader 2 2 3 Link to post Share on other sites More sharing options...
Nearholmer Posted November 27, 2019 Share Posted November 27, 2019 For goodness sake don't send him round to my place next. I might not have all that many layouts on the go (one indoors, one outdoors, and one in limbo), but if he sees the size of the train fleet, and starts doing utilisation factor calculations, I fear that Barry Island beckons for a lot an awful lot of engines, carriages, and wagons. The ones that are hardest to justify are probably the 009/HOe train-fleet-in-exile, given that I haven't had a 9mm gauge layout for about thirty years, and I can barely see the little blighters if I try looking at them. 2 2 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 27, 2019 Author RMweb Premium Share Posted November 27, 2019 No, the fleet will keep being added to, it’s just the layouts need reducing, and anyway, narrow gauge is fun, as I reported last weekend. 1 Link to post Share on other sites More sharing options...
RMweb Gold Argos Posted November 27, 2019 RMweb Gold Share Posted November 27, 2019 (edited) 2 hours ago, Northroader said: There was this bloke called this week, an avuncular look about him, going bald, neat little ‘tache, and I gather Annie thinks the world of him, so I invited him in and showed him the loft. He looked round, shook his head, pursed his lips, and made out a report, which he gave me before rushing off to some firm he called I.C.I.? The report’s called “The Reshaping of Bob’s Railways” I gather there’s too many layouts in the loft, and I should rationalise by going from four to two (there’s a vague one I haven’t run a thread on) It all makes sense, I suppose, so see how I get on, with reports on what’s happening, when it happens, if it happens. It's panto season so the only real response is "boooooooo!" As we've had the baddie presumably the fairy godmother is about to turn up and save the day? Edited November 27, 2019 by Argos 1 3 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 27, 2019 RMweb Premium Share Posted November 27, 2019 37 minutes ago, Argos said: As we've had the baddie presumably the fairy godmother is about to turn up and save the day? I'm having a rather disturbing vision of John Betjeman in drag... 3 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 27, 2019 Author RMweb Premium Share Posted November 27, 2019 1 hour ago, Argos said: presumably the fairy godmother is about to turn up and save the day? One can always hope: 2 3 Link to post Share on other sites More sharing options...
Nearholmer Posted November 27, 2019 Share Posted November 27, 2019 I knew it, I just knew!! As soon as I read the words ‘fairy godmother’, I thought “Oh no! We know what’s coming next!”. 2 5 2 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted November 27, 2019 RMweb Premium Share Posted November 27, 2019 No, that's not my mental picture of Betjeman in drag. Rivet counting for a moment, Hilda is in witch rather than fairy mode there although in the tales the two are moderately interchangeable. On her suitability as anyone's godmother, I will not comment. 2 2 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted November 27, 2019 RMweb Gold Share Posted November 27, 2019 The Narrow gauge layout is fun so you want to keep that. However I have been interested in both Englefield and Washbourne these are small layouts would you be droppping one to extend the other? If so my vote would be for Washbourne were I to have one. Mind you it would be a pity to lose either, hard choice for you I think. Don 2 Link to post Share on other sites More sharing options...
RMweb Premium Annie Posted November 28, 2019 RMweb Premium Share Posted November 28, 2019 9 hours ago, Northroader said: There was this bloke called this week, an avuncular look about him, going bald, neat little ‘tache, and I gather Annie thinks the world of him.......... Grrrrrr..... 3 5 Link to post Share on other sites More sharing options...
RMweb Premium Northroader Posted November 28, 2019 Author RMweb Premium Share Posted November 28, 2019 (edited) It looks like the title of the paper he’s holding has been “got at” in your clip, Annie. Really I should explain that besides the two “main line” and the narrow gauge one I do threads on, there’s another which has been going in fits and starts catering for old time continental Europe which hasn’t had a thread, and having four layouts in the loft has been getting a bit shambolic, particularly when you factor in my age. Never fear, Don, there’ll be one “main line” layout combining bits of all three. Edited December 13, 2019 by Northroader 5 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now