RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 10 hours ago, Edwardian said: As a consequence, I felt I had to go back yesterday, though it would have been more fun to see everything in company. In particular, I wanted to revisit a couple of layouts, namely The Dépôts, Rosedale East, because I never tire of that and I had failed to get any decent pictures of that on Sunday, and to have another good look at Edford - The Nettlebridge Valley Railway. You did well there as from WF's own posts I gather the Saturday was his 1928 day; you got the 1908 day. He seems to have skipped his 1918 day with the regrettable outcome that his D299 was not on view. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Donw Posted April 23, 2019 RMweb Gold Share Posted April 23, 2019 Yes some lovely scenery on the NVR but rural no village. MRJ 256 had an article on the line mostly discussing the rationale behind it. Jerry Clifford as editor may have done the arm twisting his Tucking MIll is set in basically the same area. Don 1 1 Link to post Share on other sites More sharing options...
webbcompound Posted April 23, 2019 Share Posted April 23, 2019 (edited) 2 hours ago, Edwardian said: The WNR/CA, has long been a communal effort in its conception from the first. Annie, having discovered the design of several WNR saloons, has now been researching the loco fleet and has discovered a fourth standard Sharp Stewart Class; 0-6-2T This looks remarkably similar to the Metropolitan Railway Company's E or F class 0-6-2T. Built variously by the Metropolitan itself, Hawthorne Leslie, and the Yorkshire Engine Company between 1896 and 1901. The E class is available as a kit from SE Finecast. Obviously without the snorkel apparatus (though with the wind in the wrong direction and a spring tide...) Edited April 23, 2019 by webbcompound 3 1 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 That's a picture of Neasden Power Station, ruined by a photobombing tank engine. To help flesh-out my mental image (Blast! Northroader's pictures are getting to my psyche!), could I enquire as to which of the WNR's engine's worked the Wolfringham line? I think there should be an old coal engine, at least until the harbour silted-up completely (the one with mudguards like bike?), but what else, and did things change when it was downgraded to LR status? 3 Link to post Share on other sites More sharing options...
Edwardian Posted April 23, 2019 Author Share Posted April 23, 2019 Thank you. That is helpful. Obviously, I've been planning the 2-4-2T for sometime. The intention is to use the Bachmann L&Y 2-4-2T. My thoughts are this (and comments welcome): - Retain tanks and bunker - add Archer's rivets to ape the Rhenish engines - Replace cab. Both the 2-4-2T and the 0-6-2T have a very characteristically Sharp cut out and are flush with the tank/bunker. The L&Y cab is narrower. - The Sharps have raised round top fireboxes. One option is to leave the firebox section of the barrel but to replace the rest of the barrel with a smaller diameter boiler and smoke-box. Alternatively, I can build up the firebox section. - New chimney - New steps and guard irons - Probably remove coal rails The 0-6-2T by contrast was only discovered today! I wonder whether a Bachmann LB&SC E4 might serve as a donor? 4 Link to post Share on other sites More sharing options...
RMweb Gold Anotheran Posted April 23, 2019 RMweb Gold Share Posted April 23, 2019 Castle Aching has become so popular that it appears to have been necessary to split the load... or maybe it's just a glitch on the system. Link to post Share on other sites More sharing options...
RMweb Gold Anotheran Posted April 23, 2019 RMweb Gold Share Posted April 23, 2019 I'm moving home on Friday and really looking forward to getting the space to get back to some modelling. During the hiatus CA has been a fantastic inspiration. Thanks Edwardian and crew for keeping such an informative, entertaining and surprising site going. Kind regards, Neil 3 2 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 (edited) The Brighton E4 is a bit too far off? How about adapting the body of a L&Y tank to the E4 chassis... The L&Y chassis might then give you the starting point for a 2-4-0 or 4-4-0. The E4 body needn't go to waste - there's bound to be someone on the look out for one to convert to P4. Edited April 23, 2019 by Compound2632 E1 corrected to E4 2 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 (edited) It's an E4. An E1 is an 0-6-0T, which looks like a Terrier, but is (IIRC) 12% larger in all of its key dimensions. An E4 is actually quite a big and powerful loco, and I'm beginning to wonder if WNR motive power might be getting too big, and having too large axle-weights, for the route. Somebody is supposed to be making an r-t-r E1, and an interesting conversion might be to bash it into the 0-6-2T West Brighton, the loco that became the prototype for class E3. As such, it would be a nice small 0-6-2T. (West Brighton had nothing to do with the later SR E1 to E1R conversions; it was a Stroudley design) Edited April 23, 2019 by Nearholmer 5 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 5 minutes ago, Nearholmer said: It's an E4. An E1 is an 0-6-0T, which looks like a Terrier, but is (IIRC) 12% larger in all of its key dimensions. An E4 is actually quite a big and powerful loco, and I'm beginning to wonder if WNR motive power might be getting too big, and having too large axle-weights, for the route. Post corrected - I didn't read Edwardian's post correctly in addition to being Brighton-ignorant. If the E1 was 12% larger all round than a Terrier, it must have been intended for one of the Irish lines. Not that that would be a problem for you. Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 I was careful to say "key dimensions" ......... by which I meant that it had a bigger spring, necessitating a lager arbor and key. 1 6 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 Now that Sharpie 2-4-2T has very much the look of one of Parker's 0-6-2Ts which is surprising as the Gorton drawing office had a much closer association with their neighbours Beyer, Peacock than the other Manchester firm. 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 1 hour ago, Nearholmer said: That's a picture of Neasden Power Station, ruined by a photobombing tank engine. They do that sort of thing - it the Thomist self-importance. Here's another - the photographer had carefully set up to record the rather interesting 29 ft centre-luggage composite of 1875 converted to a mess coach... 2 3 Link to post Share on other sites More sharing options...
Hroth Posted April 23, 2019 Share Posted April 23, 2019 5 minutes ago, Compound2632 said: They do that sort of thing - it the Thomist self-importance. Here's another - the photographer had carefully set up to record the rather interesting 29 ft centre-luggage composite of 1875 converted to a mess coach... I see that whoever renumbered the locomotive didn't do a very good job of weathering the result.... 2 2 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 (edited) And, here is a photo of West Brighton. http://www.lbscr.org/Rolling-Stock/Locomotives/Stroudley/F.xhtml Notice the lantern fitted between chimney and dome, an idea that was taken forward on a few other locos at about this time. Edited April 23, 2019 by Nearholmer 2 3 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 (edited) . Edited April 23, 2019 by Nearholmer repetition Link to post Share on other sites More sharing options...
Hroth Posted April 23, 2019 Share Posted April 23, 2019 18 minutes ago, Nearholmer said: And, here is a photo of West Brighton. http://www.lbscr.org/Rolling-Stock/Locomotives/Stroudley/F.xhtml Notice the lantern fitted between chimney and dome, an idea that was taken forward on a few other locos at about this time. A nice, unfussy design! Did you spot that the loco behind the D1 has the lantern accessory fitted between the dome and the cab? 3 Link to post Share on other sites More sharing options...
Caley Jim Posted April 23, 2019 Share Posted April 23, 2019 1 hour ago, Nearholmer said: I was careful to say "key dimensions" ......... by which I meant that it had a bigger spring, necessitating a lager arbor and key. So, if it was clockwork, why did it need tanks? To cover the mechanism, presumably! Jim 1 2 4 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 (edited) "Did you spot that the loco behind the D1 has the lantern accessory fitted between the dome and the cab?" So it does! Clearly some experimentation about where best to fit the lantern. But, West Brighton was not a D1, it was the F. A D1 was an 0-4-2T. Maybe best stop this LBSCR class designation business because, yet again, I've diverted the thread. Sorry! Edwardian, the E1 does have 4'6" wheels, which is what got me onto West Brighton as a possible inspiration for an 0-6-2T. Which firm is meant to be making a model of the E1? Edited April 23, 2019 by Nearholmer 1 Link to post Share on other sites More sharing options...
Edwardian Posted April 23, 2019 Author Share Posted April 23, 2019 1 hour ago, Compound2632 said: The Brighton E4 is a bit too far off? How about adapting the body of a L&Y tank to the E4 chassis... The L&Y chassis might then give you the starting point for a 2-4-0 or 4-4-0. The E4 body needn't go to waste - there's bound to be someone on the look out for one to convert to P4. 1 hour ago, Nearholmer said: It's an E4. An E1 is an 0-6-0T, which looks like a Terrier, but is (IIRC) 12% larger in all of its key dimensions. An E4 is actually quite a big and powerful loco, and I'm beginning to wonder if WNR motive power might be getting too big, and having too large axle-weights, for the route. Somebody is supposed to be making an r-t-r E1, and an interesting conversion might be to bash it into the 0-6-2T West Brighton, the loco that became the prototype for class E3. As such, it would be a nice small 0-6-2T. (West Brighton had nothing to do with the later SR E1 to E1R conversions; it was a Stroudley design) It would be good to use the same body; essentially make the same modifications to the Bachmann L&Y body for use on both 2-4-2T and 0-6-2T. The only difference, I suppose, need be a modest front splasher on the 0-6-2T. But, then, where would I get 2 extra Bachmann bodies? I agree with Kevin, the E4 is a bit too big, with 5' drivers, that's large for a WN 6-coupled goods; WN passenger classes seem to be around the 5'8" mark. I'd have though 4'6" would be more appropriate. Any views on that? The 5600, with 4' 7 1/2" coupled wheels is rather better. I think it has about the same wheelbase as the E4, but much less evenly spaced. I think if there were a 4'6" wheeled RTR 0-6- chassis, that would be fine. I could simply add a 3'6" trailing wheel. The Jinty has 4' 7" wheels, they appear evenly spaced, but the 16' w/b seems a tad long. You can tell I've not planned for a Sharp 0-6-2T! 1 1 Link to post Share on other sites More sharing options...
RMweb Premium Compound2632 Posted April 23, 2019 RMweb Premium Share Posted April 23, 2019 (edited) 4 minutes ago, Edwardian said: The Jinty has 4' 7" wheels, they appear evenly spaced, but the 16' w/b seems a tad long. Dearie dearie me that gaping Midland-shaped hole in your library again. Write out one hundred times (once for every engine of the Neilson Goods class): 8'0" + 8'6" And yes, it is long - the Midland built Big Engines in Matthew Kirtley and Samuel Johnson's day. Edited April 23, 2019 by Compound2632 1 2 Link to post Share on other sites More sharing options...
Edwardian Posted April 23, 2019 Author Share Posted April 23, 2019 1 hour ago, Compound2632 said: The Brighton E4 is a bit too far off? How about adapting the body of a L&Y tank to the E4 chassis... The L&Y chassis might then give you the starting point for a 2-4-0 or 4-4-0. The E4 body needn't go to waste - there's bound to be someone on the look out for one to convert to P4. Good point. With 5'8" drivers, that's a perfectly acceptable basis for a 2-4-0 or 4-4-0 tender engine on the WN. Link to post Share on other sites More sharing options...
Edwardian Posted April 23, 2019 Author Share Posted April 23, 2019 Just now, Compound2632 said: Dearie dearie me that gaping Midland-shaped hole in your library again. Write out one hundred times (once for every engine of the Neilson Goods class): 8'0" + 8'6" Well, I did say "appear" - better than the 5600 I was looking at (7'3" + 8' on the coupled wheels). Bought Volume 1 of the MR loco books at York. Given that an entire volume serves the purpose of what, in most books, would be the Introduction, I now fear how many volumes there may be left to collect. 1 Link to post Share on other sites More sharing options...
Nearholmer Posted April 23, 2019 Share Posted April 23, 2019 Edwardian, the LBSCR E1 does have 4'6" wheels, which is what got me onto West Brighton as a possible inspiration for a small 0-6-2T. Which firm is meant to be making a model of the E1? 1 Link to post Share on other sites More sharing options...
Edwardian Posted April 23, 2019 Author Share Posted April 23, 2019 Perfect. I don't think Rapido has really made much of a start on the Model Rail commission, but, then, at the rate I model .... Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now