RMweb Premium Sasquatch Posted January 25, 2014 Author RMweb Premium Share Posted January 25, 2014 I was a bit scared to remove that popcorn ceiling but it only took 20 minutes and probably wasn't asbestos anyway! Before anybody points out that wasn't the mask used on the job and I had industrial rubber gloves on! Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 25, 2014 Author RMweb Premium Share Posted January 25, 2014 (edited) This is what I have to remove in our new place in a few weeks, luckily only one 16 ft wall of it BUT it will come in handy for lining out one side of the New Den. :locomotive: Avon Close 010.JPG Avon Close 012.JPG Do you want a Job? :no: Bodge It's pulling the nails I hate. The last guy who owned this house had an axe and a hammer!! There's not a screw anywhere. I'll pack all the tools in my truck and see you in March then Andy Edited January 25, 2014 by Sasquatch Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 25, 2014 Author RMweb Premium Share Posted January 25, 2014 Talking about the Truck. I've got to run into town to get some more primer and some gorgonzola for this big pasta bake I'm making for tonight's dinner party. Ooh we're out of beer!!! Very important!!!!!!!! 3 Link to post Share on other sites More sharing options...
Jaz Posted January 25, 2014 Share Posted January 25, 2014 Sasquatch post 372 Do you shave your hands? Surely they should be a little hairier? Lovely work Link to post Share on other sites More sharing options...
Brass0four Posted January 25, 2014 Share Posted January 25, 2014 (edited) Mmm. Love the northern-hemisphere ninja suit! (you have got rather nice hands, petal) Maybe not so hilarious, given my awareness of your butchery. Edited January 25, 2014 by Brass0four Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 25, 2014 Author RMweb Premium Share Posted January 25, 2014 Sasquatch post 372 Do you shave your hands? Surely they should be a little hairier? Lovely work The left one is very hairy, on account of the piece of my forearm they sowed onto the back of it. Creep-py!! Link to post Share on other sites More sharing options...
Jaz Posted January 27, 2014 Share Posted January 27, 2014 Like this Hidden Sidings, would it take much to turn it into a MPD / MTD? Perhaps with a lift off bit of scenery? Two for one sort of thing??? Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 27, 2014 Author RMweb Premium Share Posted January 27, 2014 (edited) I do want a motive power depot. There's an ash hoist and coal hole water tower waiting. The idea of hidden sidings here and there, is because a fiddle yard would take up a lot of space in the building that will house 4 interconnected layouts! It is also better that trains can run from one section to another, then onto a hidden siding instead of needing to traverse the entire layout! The trains must do more than just run in circles! I'm bored with that!! So yes, lots of lift off sections like with Dunster. A faller road system would be nice too. Dream on Shaun. Dream on...... Edited January 27, 2014 by Sasquatch 1 Link to post Share on other sites More sharing options...
Jaz Posted January 27, 2014 Share Posted January 27, 2014 (edited) With this PIR we might go a faller, although there is a new dutch contender... Edited January 27, 2014 by Jaz Link to post Share on other sites More sharing options...
silky_jack Posted January 27, 2014 Share Posted January 27, 2014 (edited) Hi Sasquatch, I am really excited my the prospect of this new build you will be doing. I CAN'T WAIT in fact! Please make sure you keep plenty of pics coming. Loving the work on the room so far too Edited January 27, 2014 by silky_jack 2 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 27, 2014 Author RMweb Premium Share Posted January 27, 2014 Hi Sasquatch, I am really excited my the prospect of this new build you will be doing. I CAN'T WAIT in fact! Please make sure you keep plenty of pics coming. Loving the work on the room so far too Here you go then Ian. As there has been a lull in modeling pics lately, I bring you some of the structures I have made over the past two years. Some may have been posted before on this thread or elsewhere. Sorry there's no step-by-step, I'll do this at a latter date when more buildings are constructed! The Coal Hole. Still under construction, uses plastic card O stone sheets on foam board. The tank needs redoing in styrene. windows are cut down leftovers from D.P.M. modulars. Ash hoist. Knightwing and Wills. Goods shed is the Wills kit extended with a roof from an American warehouse kit. Atkinson, Foggett & Laycock Wills again. The ruined church is Linka cast in plastic just like the Abbey! this one will be overgrown with weeds and ivy! More shortly. 3 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 27, 2014 Author RMweb Premium Share Posted January 27, 2014 Lofthouses Mill started out life as two Pola engine houses picked up at the local show for $1 each. O gauge brick sheet was used to anglasize them. Smoke stack is from a Walthers Factory kit which has been kit bashed and is buried in a box somewhere in the attic, more on that later. Lofthouse make webbing for the troops in their half relief mill which will sit at the back on a hill. 5 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 27, 2014 Author RMweb Premium Share Posted January 27, 2014 All of the following structures are made from foam board with embossed plastic sheets. The Wool Pack pub was my first true scratch build and wouldn't look too out of place in Huddersfield. The small brewery is based on some N gauge models, unavailable in OO, I decided to make my own. Anyone recognize the farm? Warehouse is based on a Midland Railway design. Half relief again, it is redundant from my shelf layout called Avon park. The small mill only took a weekend and a few evenings. Once the technique was mastered I moved on to greater things. Make shed before you build a house sort of approach! 4 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 27, 2014 Author RMweb Premium Share Posted January 27, 2014 This textile mill is based on one in West Vale. Here's the link to the build , which I must get on and finish. All those windows need galzing and I'm not in the right frame of mind to do it. So send me some good juju!!! 7 Link to post Share on other sites More sharing options...
d winpenny Posted January 27, 2014 Share Posted January 27, 2014 Absolutely superb modeling David Link to post Share on other sites More sharing options...
Jaz Posted January 27, 2014 Share Posted January 27, 2014 I agree, absolutely fantastic modelling, will really look forward to seeing this all in place and displayed. When you get more organised, anything you did on the build of each of these would be fascinating. Seeing what you have done before this is going to be a dream of a build. Link to post Share on other sites More sharing options...
Removed a/c Posted January 27, 2014 Share Posted January 27, 2014 Wonderful buildings. Is the farm from All Creatures? Link to post Share on other sites More sharing options...
Brass0four Posted January 27, 2014 Share Posted January 27, 2014 Wonderful! They'll be excellent to put down and move around - give your layout a sense of scale from the word go. I too look forward to the build although I realise we may have to be (can't remember how to spell) patient. Going brain-dead as well as everything else! Tony. Utterly depressed Link to post Share on other sites More sharing options...
silky_jack Posted January 28, 2014 Share Posted January 28, 2014 Those buildings look excellent......and some of them are spectacular in their size! Are they all destined for the new layout when it's finished?? Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 28, 2014 Author RMweb Premium Share Posted January 28, 2014 Yes! there' s more too. And some still to be built including a derelict mill, big brick warehouse 30" long a long carriage shed, smaller engine house, 4 signal boxes, another pub, small rows of houses and a model of Gibson Mill. Will put up some more pictures when I find some more time. I plan to make a stone press for retaining walls and do some casting of terraced house fronts, tunnel portholes and building segments. 3 Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 28, 2014 Author RMweb Premium Share Posted January 28, 2014 The farm by the way is from Shaun The Sheep! Couldn't resist making it! The pig sty is planned also. 3 Link to post Share on other sites More sharing options...
Brass0four Posted January 28, 2014 Share Posted January 28, 2014 There are times - many times! - when I wish I'd chosen an area where stone is common for structures. Mine are all red brick and there's no simple way around it. It's either brick paper, some of which is very good (Scalescenes) but lacks 3D texture, or plastic which means complex painting to be effective. Any other options? - pm me! Tony. Link to post Share on other sites More sharing options...
Andrew P Posted January 28, 2014 Share Posted January 28, 2014 Hi Shaun, some great buildings there mate, well done and I look forward to seeing them on the Layout. Andy Link to post Share on other sites More sharing options...
RMweb Premium Sasquatch Posted January 29, 2014 Author RMweb Premium Share Posted January 29, 2014 There are times - many times! - when I wish I'd chosen an area where stone is common for structures. Mine are all red brick and there's no simple way around it. It's either brick paper, some of which is very good (Scalescenes) but lacks 3D texture, or plastic which means complex painting to be effective. Any other options? - pm me! Tony. Plastic is my preferred medium, the brick coloured kind. First pick out a few bricks with a black sharpie/marker. Then wash on some thinned crafters acrylic mortar colour and wipe over the bricks with a paper towel. Dry brush with crafters acrylic brick red and terracotta from a pallet. When dry (over night) use thinned matt black Humbol enamel. I add acrylic moss green too. Here preaches the artist! Link to post Share on other sites More sharing options...
Jaz Posted January 29, 2014 Share Posted January 29, 2014 Oooooh tips, my favourite bit. Are you likely to add another Linka to the stable? Would love to see your take on building with it. The weather should be warm enough soon for me to start messing with mine in the garage. If I get enough time. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now