atom3624 Posted November 23, 2019 Share Posted November 23, 2019 I hate to say this, particularly in such a bold project, but the build quality and QC does seem a little inconsistent. Al. 1 Link to post Share on other sites More sharing options...
D-A-T Posted November 23, 2019 Share Posted November 23, 2019 20 minutes ago, atom3624 said: I hate to say this, particularly in such a bold project, but the build quality and QC does seem a little inconsistent. Al. Agreed. I was thinking of buying one as a Showcase model but have completely changed my mind now. The price maybe reasonable for an O gauge model but it is still a sizeable amount of money that I’m not prepared to risk. 2 Link to post Share on other sites More sharing options...
RMweb Premium Hal Nail Posted November 23, 2019 RMweb Premium Share Posted November 23, 2019 47 minutes ago, D-A-T said: The price maybe reasonable for an O gauge model but it is still a sizeable amount of money A Dapol autotank and a fantastic night* on the tiles *or a year of the sort I can handle. 2 Link to post Share on other sites More sharing options...
jay*bobble Posted November 23, 2019 Share Posted November 23, 2019 Interesting to see how many of you are haveing the same problems with your a3s I have looked at several of them and it is a tooling issue that leaves the marks on the smoke box and sum verry poor quality control issue's sum loocos even suffer from I'll fitting parts think Hatton and Heljan should take a good long look at what customers have to say would be great to hear from Hatton to see what they have to say and any one noticed the a4 is missing the vertical hand rail Link to post Share on other sites More sharing options...
micklner Posted November 23, 2019 Share Posted November 23, 2019 Re the Smokebox , is the plastic so soft that the broken off smoke deflector has dug into the plastic when it broke/bent over and dented the plastic at the same time ? . The marks appear in line with where the top edge of the deflector would have hit the smokebox. If yes, a very poor quality soft plastic has been used. Link to post Share on other sites More sharing options...
jay*bobble Posted November 23, 2019 Share Posted November 23, 2019 The marks on the deflector version are tooling marks they are on 3 that I've seen only slight on my own tooling does not line up properly and with all the things that are not correct so much for experts Hatton should have asked me no expert but a nerd on a3s how with all the photos and 60103 in preservation can they get it so wrong 1 Link to post Share on other sites More sharing options...
Franzburg Posted November 24, 2019 Share Posted November 24, 2019 (edited) I`ve tried to model the draincocks of early A3 versions and as I really don`t know why Heljan didn`t construct a simpler solution to connect loco with tender but to use srews , I soldered a pin to a small brass plate and srewed it on the loco and so , though it`s a bit fiddly, I needn`t use the srews anymore. Rgds Bernd Edited November 24, 2019 by Franzburg 1 2 Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 May be of interest to all of you who have lner a3 Hachette transfers can be found on eBay and are great for front bogie wheels 1 1 Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 Just a heads up if any of you are getting an a4 from hattons spoke to them at nec 2day guess what when i sked where the vertical hand rail wos on the a4 the answer wos it wos over looked and its to late to put right not what you would expect for a major project come on hattons you can do better than this its a school boy mistake put it right wail you canand sort the paint job on mallard please for 750 don't wanna be messing around drilling and paying out for hand rail wire and hand rail knobs not every one can do this getting it right even if delayed a few more months would save negative comments Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 Thank you all for the lovely messages regard to the Hachette transfers for the lner green a3s thay fit just fine and when dry just paint with satin varnish humbrol is ok enamel or acrylic problem solved just got to find front steps and jobs a good one Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 May be time to recall the a3s as so many people are experiencing valve gear failers not a good start for what should have been the best mass produced a3 on the market the a4 seems so far set to be the same its a shame when you look at them a bit more time and research would have done the job as look wise thay aint to bad Link to post Share on other sites More sharing options...
BRIBRI Posted November 24, 2019 Share Posted November 24, 2019 My FS A3 so far. Never thought I would have to do so much to this loco. I agree with everything others have said. I have too many issues to list them all. Most have been resolved with paint, super glue, files, and sand paper. Shame just a little more care it could have been near perfect. The next issues are to do with fitting DCC and the running. Why did they not consult someone about DCC installations and future loco maintenance? I still have problems with the rear truck and the motor worm gear also jamming over the drive cog at very slow speeds. Still that’s for tomorrow! Some pics attached of progress. Note on the pic my cab gauges are not screen printed properly I have since added some printed ones I am not convinced that I will be picking up my A4. Rgds Brian 1 1 Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 Lovely pic of cab interier Brian how did you do the fire hole look fantastic Link to post Share on other sites More sharing options...
jay*bobble Posted November 24, 2019 Share Posted November 24, 2019 Considering that Hattons Dave stated the blogs off ,one would expect him to take on board what's being said before production started .I read lots of comments on fb and lots of people pointed out inaccuracies. Did the read what we all put .I think this is a valid point. 1 Link to post Share on other sites More sharing options...
BRIBRI Posted November 25, 2019 Share Posted November 25, 2019 Jay thanks for your kind remarks. I have done a few fire boxes in my time some in brass. It’s a bit nerve racking but worth it. I just remove as much from the fire box hole as possible using drills starting with a row of small holes and moving progressively on to larger ones. I then finish off with small files of various shapes. For the A3 I made a Plasticard flap with a brass rod to look like a pivot. This was then stuck on in the open position and painted black. The A3 cab is easily removed by undoing the 3 screws. I usually make a small light tight Plasticard box representing the fire hole which is not necessary on the A3. I then fit a small block of a particular type of packing foam I came across by accident When torn rather than cut it gives a very realistic coal effect. The LED is simply pushed into it I hope the attached picture helps identify the type. The fire box flap is one that got away and turned up after I made another! 2 2 1 Link to post Share on other sites More sharing options...
jay*bobble Posted November 25, 2019 Share Posted November 25, 2019 Well done Brian fantastic job every useful info thank you Link to post Share on other sites More sharing options...
RMweb Gold Hattons Dave Posted November 25, 2019 Author RMweb Gold Share Posted November 25, 2019 Hi guys, Following some discussion about the A4s on the thread recently, I just wanted to clarify a couple of issues. Some of you have identified a missing handrail on the Class A4. This is indeed missing but unfortunately it is too late to rectify this on the production models. Other issues have been raised such as boiler seams and running issues with the valve gear. I want to assure you that this a not a project-wide issue and isolated cases such as those will be dealt with by our returns department, which you can get in touch with on info@hattons.co.uk. Cheers, Dave 1 2 Link to post Share on other sites More sharing options...
Administrators Phil Parker Posted November 25, 2019 Administrators Share Posted November 25, 2019 18 hours ago, jay*bobble said: Considering that Hattons Dave stated the blogs off ,one would expect him to take on board what's being said before production started .I read lots of comments on fb and lots of people pointed out inaccuracies. Did the read what we all put .I think this is a valid point. If you mean "Did they read what we all put" (Autocorrect seems to be garbling your posts) then the problem is likely to be that if you wait until everyone on the Internet is happy, the model will never be produced as there will always be another "Can you just..." moment. Every model is a balance between perfection and price. 2 4 Link to post Share on other sites More sharing options...
jay*bobble Posted November 25, 2019 Share Posted November 25, 2019 Great to see that Dave from Hattons has responded .lets hope that Hattons would be able to provide sum hand rails that match the a4s.that we can fit if we wish to do so thank Link to post Share on other sites More sharing options...
BRIBRI Posted November 25, 2019 Share Posted November 25, 2019 More on my A3. I finally got to the stage of running and setting up the DCC. SWD never got back to me regarding the ESU chip and software so I used my preferred chip and software from Digitrains namely Zimo and Paul Chetter sound. Which is working well at the moment. I may treat it to a boom box speaker. I had problems initially with derailment caused BT the trailing truck arrangement. I sorted mine out by cutting 2 coils off the spring and limiting the side play by putting a brass spacer either side of the truck. See attached pic. The tender is unbelievably heavy and the electrical pickups scrape like rusty disk brakes. When they actually touch the wheels, which they don't always! With this system some of my pickups were pushing the wheel to one side and onto the plastic chassis side. Effectively the loco was dragging a brick around! I have removed all the gubbins from the tender and just added a small weight. I could fit some sensible pickups but they are not necessary as those on the loco are doing an adequate job, especially with the extreme weight of the loco. Picture of my chassis as tested attached. The loco travels backwards and forwards at speed through Peco points, double slips, Marcway scissor crossing and three way points. Incidentally despite the large current hungry motor this is the only loco I have which will not give wheel slip. Either under DCC with maximum gain or DC. In my opinion it is too heavy. Wheel slip can be a safety feature if a loco is caught up some where unnoticed. I hope some one at Hattons finds my rambling more important than a couple of handrails and food for thought when designing in the future. Rgds Brian 1 3 Link to post Share on other sites More sharing options...
jay*bobble Posted November 26, 2019 Share Posted November 26, 2019 I would say I am lucky that my fs runs nice .I totally striped mine down and rebuilt it now bits n bobs all fit nice a fiddley job but worth time that it took all day . Soon be finished with the cosmetic up grades . Photos to come when its done. Link to post Share on other sites More sharing options...
Franzburg Posted November 27, 2019 Share Posted November 27, 2019 On 25/11/2019 at 23:19, BRIBRI said: More on my A3. I finally got to the stage of running and setting up the DCC. SWD never got back to me regarding the ESU chip and software so I used my preferred chip and software from Digitrains namely Zimo and Paul Chetter sound. Which is working well at the moment. I may treat it to a boom box speaker. I had problems initially with derailment caused BT the trailing truck arrangement. I sorted mine out by cutting 2 coils off the spring and limiting the side play by putting a brass spacer either side of the truck. See attached pic. The tender is unbelievably heavy and the electrical pickups scrape like rusty disk brakes. When they actually touch the wheels, which they don't always! With this system some of my pickups were pushing the wheel to one side and onto the plastic chassis side. Effectively the loco was dragging a brick around! I have removed all the gubbins from the tender and just added a small weight. I could fit some sensible pickups but they are not necessary as those on the loco are doing an adequate job, especially with the extreme weight of the loco. Picture of my chassis as tested attached. The loco travels backwards and forwards at speed through Peco points, double slips, Marcway scissor crossing and three way points. Incidentally despite the large current hungry motor this is the only loco I have which will not give wheel slip. Either under DCC with maximum gain or DC. In my opinion it is too heavy. Wheel slip can be a safety feature if a loco is caught up some where unnoticed. I hope some one at Hattons finds my rambling more important than a couple of handrails and food for thought when designing in the future. Rgds Brian Hi Brian , I`d like to know, as I use a Zimo decoder too, concerning "running and setting up DCC", which values you chose for CVs 2, 3, 9 , and 56 ! Rgds Bernd Link to post Share on other sites More sharing options...
jay*bobble Posted November 27, 2019 Share Posted November 27, 2019 Reckon the next batch of a3s will be spot on look forwards to my next one Link to post Share on other sites More sharing options...
two tone green Posted November 28, 2019 Share Posted November 28, 2019 Spoke with Hattons yesterday about my replacement and they are still awaiting stock. Should still be this week they say. Link to post Share on other sites More sharing options...
BRIBRI Posted November 28, 2019 Share Posted November 28, 2019 Hi Bernd My settings for these CV are:- 2 = 10 3 = 10 9 = 0 * 56 = 55 * I use Decoder Pro for my Zymo CV,s PWM is set to 40 MHz. Decoder Pro states 40mhz active if CV 9 = 0 (CV112 Bit 5) Not sure how that fits in with the Zimo documentation. But it works well and came in my Zimo by default. Rgds Brian 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now