Jon Fitness Posted February 25, 2020 Author Share Posted February 25, 2020 Here's the first four signals for 2020. All are LMS upper quadrants and use Scale Signal Supply arms and post caps, Modelu lamp cases and some of my own etches and castings. (Ladders, bolting plates, weight bars, smoke deflector and No5 bracket). The lattice post is an extended MSE super7 etch. All are LED lit and servo operated. A rare burst of sunshine provided some nice natural lighting (it was raining 5 minutes later) More soon JF 14 2 Link to post Share on other sites More sharing options...
Jon Fitness Posted March 8, 2020 Author Share Posted March 8, 2020 Here are 2 out of a batch of 4 SR ground signals recently completed. They are all from the MSE kit but with my own etched nickel silver disc faces. They are all LED lit and servo operated. More soon JF 7 4 Link to post Share on other sites More sharing options...
Junctionmad Posted March 8, 2020 Share Posted March 8, 2020 Very nice , it’s makes me up my game in my own 7mm signals every time I see your work I would have been under the impression the landing boards would have been a dark colour , as opposed to a nearly “ new” timber colour ?? 1 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted March 8, 2020 RMweb Gold Share Posted March 8, 2020 They are superb! 1 Link to post Share on other sites More sharing options...
Jon Fitness Posted March 8, 2020 Author Share Posted March 8, 2020 4 hours ago, Junctionmad said: Very nice , it’s makes me up my game in my own 7mm signals every time I see your work I would have been under the impression the landing boards would have been a dark colour , as opposed to a nearly “ new” timber colour ?? I think the boards get bleached in the sun but get a bit green in the damp. They'll change as the weather changes... 1 Link to post Share on other sites More sharing options...
Junctionmad Posted March 9, 2020 Share Posted March 9, 2020 11 hours ago, Jon Fitness said: I think the boards get bleached in the sun but get a bit green in the damp. They'll change as the weather changes... Yes. I Have wondered how best to represent them. Link to post Share on other sites More sharing options...
Jon Fitness Posted March 9, 2020 Author Share Posted March 9, 2020 54 minutes ago, Junctionmad said: Yes. I Have wondered how best to represent them. The boards are .8mm ply strips. I stained them with a thinned wash of my usual humbrol 33/62 mix. This then had a hint of Matt green drybrushed sparingly over it. JF 1 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted March 9, 2020 RMweb Gold Share Posted March 9, 2020 18 hours ago, Jon Fitness said: Here are 2 out of a batch of 4 SR ground signals recently completed. They are all from the MSE kit but with my own etched nickel silver disc faces. They are all LED lit and servo operated. More soon JF They look beautiful Jon but how many Southern yellow arm ground discs came as half discs as opposed to the (very) miniature semaphore arm style ? I can't readily recall seeing any as half discs (possibly once, not sure) so I suspect it was probably a later development and the miniture are style definitely lasted a long tme - into the 1980s if not a little later I would say. Link to post Share on other sites More sharing options...
Jon Fitness Posted March 9, 2020 Author Share Posted March 9, 2020 1 minute ago, The Stationmaster said: They look beautiful Jon but how many Southern yellow arm ground discs came as half discs as opposed to the (very) miniature semaphore arm style ? I can't readily recall seeing any as half discs (possibly once, not sure) so I suspect it was probably a later development and the miniture are style definitely lasted a long tme - into the 1980s if not a little later I would say. Good point. I'll have to investigate that. Maybe, as you suggest, it was a later BR development. It's one of those things where I'm sure I've seen a picture of it but if I go off and look, it simply won't be there... JF Link to post Share on other sites More sharing options...
RailWest Posted March 9, 2020 Share Posted March 9, 2020 1 hour ago, Jon Fitness said: Good point. I'll have to investigate that. Maybe, as you suggest, it was a later BR development. It's one of those things where I'm sure I've seen a picture of it but if I go off and look, it simply won't be there... JF Certainly in the instances with which I am familiar most were installed in the 1930s onwards with the miniature arm and I suspect that the black half-disc examples were either BR-era replacements for old arms or BR-era examples of new signals. 1 Link to post Share on other sites More sharing options...
RMweb Gold Steve Hewitt Posted March 9, 2020 RMweb Gold Share Posted March 9, 2020 Jon, Those Ground Signals are the bees knees. A couple of shots I took at Swanage a year or three ago.... Steve. 2 1 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted March 10, 2020 RMweb Gold Share Posted March 10, 2020 12 hours ago, Jon Fitness said: Good point. I'll have to investigate that. Maybe, as you suggest, it was a later BR development. It's one of those things where I'm sure I've seen a picture of it but if I go off and look, it simply won't be there... JF There is one on the Mid Hants but it is serving in a rather different role so hasn't got the original colouring of yellow arm with black vertical stripe. 1 Link to post Share on other sites More sharing options...
Jon Fitness Posted March 10, 2020 Author Share Posted March 10, 2020 13 hours ago, Steve Hewitt said: Jon, Those Ground Signals are the bees knees. A couple of shots I took at Swanage a year or three ago.... Steve. Ah, thanks for that Steve. Good enough for me JF Link to post Share on other sites More sharing options...
RailWest Posted March 10, 2020 Share Posted March 10, 2020 Try this ? 4 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted March 10, 2020 RMweb Gold Share Posted March 10, 2020 50 minutes ago, RailWest said: Try this ? Where's that one please? Link to post Share on other sites More sharing options...
RailWest Posted March 10, 2020 Share Posted March 10, 2020 It was at Midsomer Norton South for a few years during the restoration there, but it has now been removed as the layout has developed. 1 Link to post Share on other sites More sharing options...
Jon Fitness Posted March 10, 2020 Author Share Posted March 10, 2020 3 hours ago, RailWest said: Try this ? Looks very thoroughly restored. 1 Link to post Share on other sites More sharing options...
raymw Posted March 10, 2020 Share Posted March 10, 2020 I posted 4 views, iirc somewhere on here, of the above signal. I've spent an hour or so in searching through my thousands of photos, and can't locate it. My photos were indexed via picassa, but not any more 1 Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted March 11, 2020 RMweb Gold Share Posted March 11, 2020 21 hours ago, Jon Fitness said: Looks very thoroughly restored. It does indeed but accurately so from what can be seen in that view. It is exactly the same basic signal as the half disc versions with the only difference being the colour of the light when on and a miniature semaphore arm bolted on instead of a half disc. Look at the various photos and you can see the bolt heads in the same position in exactly the same position for the two different 'arms' Interestingly S&B made '4mm' scale cast metal working models of both types back in the 1950s but they were probably nearer 7 mm scale than 4mm - lovely t little things and they worked with (near invisible) springing to hold them in the 'on' position. Beautiful little models but I haven't seen one for many years despite coming across various S&B items at auction sales. Link to post Share on other sites More sharing options...
Stephen Freeman Posted March 11, 2020 Share Posted March 11, 2020 1 hour ago, The Stationmaster said: It does indeed but accurately so from what can be seen in that view. It is exactly the same basic signal as the half disc versions with the only difference being the colour of the light when on and a miniature semaphore arm bolted on instead of a half disc. Look at the various photos and you can see the bolt heads in the same position in exactly the same position for the two different 'arms' Interestingly S&B made '4mm' scale cast metal working models of both types back in the 1950s but they were probably nearer 7 mm scale than 4mm - lovely t little things and they worked with (near invisible) springing to hold them in the 'on' position. Beautiful little models but I haven't seen one for many years despite coming across various S&B items at auction sales. Strange you should mention those. Think I still have one, see if I can find it. 1 Link to post Share on other sites More sharing options...
raymw Posted March 11, 2020 Share Posted March 11, 2020 On 10/03/2020 at 14:17, raymw said: I posted 4 views, iirc somewhere on here, of the above signal. I've spent an hour or so in searching through my thousands of photos, and can't locate it. My photos were indexed via picassa, but not any more never give up -here they are 2 1 1 Link to post Share on other sites More sharing options...
Jon Fitness Posted March 18, 2020 Author Share Posted March 18, 2020 On 11/03/2020 at 21:49, raymw said: never give up -here they are Many thanks for those! All are now in the signal pictures files 2 1 Link to post Share on other sites More sharing options...
RailWest Posted March 18, 2020 Share Posted March 18, 2020 There is now an elevated 'not yet in use' red version of this signal at MSN (shunt 23), but I can't find any recent photograph of it in my files - maybe somewhere local there can help? Link to post Share on other sites More sharing options...
RMweb Gold The Stationmaster Posted March 18, 2020 RMweb Gold Share Posted March 18, 2020 1 hour ago, RailWest said: There is now an elevated 'not yet in use' red version of this signal at MSN (shunt 23), but I can't find any recent photograph of it in my files - maybe somewhere local there can help? The only one I have got a pic of is a similarly modified one on the Mid Hants. Link to post Share on other sites More sharing options...
mike knowles Posted March 20, 2020 Share Posted March 20, 2020 On 25/02/2020 at 20:21, Jon Fitness said: Here's the first four signals for 2020. All are LMS upper quadrants and use Scale Signal Supply arms and post caps, Modelu lamp cases and some of my own etches and castings. (Ladders, bolting plates, weight bars, smoke deflector and No5 bracket). The lattice post is an extended MSE super7 etch. All are LED lit and servo operated. A rare burst of sunshine provided some nice natural lighting (it was raining 5 minutes later) More soon JF I notice the back blinders on these signals are painted white. I always assumed they were black but some photos of prototype signals I've looked at recently also show white ones. Any idea whether white was always used or could they be either colour. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now