Stephenwolsten Posted September 7, 2019 Author Share Posted September 7, 2019 (edited) Original LOR motor coach showing internal arrangement of seating. Edited October 6, 2022 by Stephenwolsten 1 Link to post Share on other sites More sharing options...
RMweb Premium Dave Hunt Posted September 7, 2019 RMweb Premium Share Posted September 7, 2019 I well remember as a nipper sitting at the front alongside the driving compartment when my Dad took me on the LOR several times as a treat. Have you seen the preserved coach in the Liverpool museum near the Albert dock Stephen? Dave 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 10, 2019 Author Share Posted September 10, 2019 Courtesy of Alan Hart's Flickr site: MDHB 1968 tour. 5 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 10, 2019 Author Share Posted September 10, 2019 I'm still attracted to the idea of extruded foam baseboards, with a thin ply frame. This display diorama is built on a base of 30mm thick extruded polystyrene flooring foam with a secondary lower frame, cut from the same 30mm thick foam. This particular baseboard has an outer framework mitred up from 9mm thick MDF, and four diagonal cross braces also from 9mm MDF help to reduce torsional deflection. With acknowledgements to New Prospect Lane. 1 1 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted September 10, 2019 RMweb Gold Share Posted September 10, 2019 To me, that still looks very heavy construction. On my Grindleford layout I used 50mm insulation foam - known as Celotex, Kingspan and other brand names - with 6mm ply sides and 19mm ply ends glued to it: I found that the 50mm foam has sufficient torsional rigidity on its own to not require further bracing. The end result is much, much lighter than a conventional ply-built board, but is just as easy to model on. I used a layer of 6mm ply glued on top to define the trackbed. Hope this helps, Al. 4 1 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 10, 2019 Author Share Posted September 10, 2019 3 hours ago, Alister_G said: To me, that still looks very heavy construction. On my Grindleford layout I used 50mm insulation foam - known as Celotex, Kingspan and other brand names - with 6mm ply sides and 19mm ply ends glued to it: I found that the 50mm foam has sufficient torsional rigidity on its own to not require further bracing. The end result is much, much lighter than a conventional ply-built board, but is just as easy to model on. I used a layer of 6mm ply glued on top to define the trackbed. Hope this helps, Al. Thanks very much. It's really useful to see what other people use and how particular methods perform. Stephen Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 11, 2019 Author Share Posted September 11, 2019 (edited) LOR motor coach bogie: Edited October 6, 2022 by Stephenwolsten 2 Link to post Share on other sites More sharing options...
sb67 Posted September 11, 2019 Share Posted September 11, 2019 On 10/09/2019 at 16:58, Alister_G said: To me, that still looks very heavy construction. On my Grindleford layout I used 50mm insulation foam - known as Celotex, Kingspan and other brand names - with 6mm ply sides and 19mm ply ends glued to it: I found that the 50mm foam has sufficient torsional rigidity on its own to not require further bracing. The end result is much, much lighter than a conventional ply-built board, but is just as easy to model on. I used a layer of 6mm ply glued on top to define the trackbed. Hope this helps, Al. How deep were the sides and ends Al and what did you use to glue the Celotex? Steve. 1 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted September 11, 2019 RMweb Gold Share Posted September 11, 2019 3 hours ago, sb67 said: How deep were the sides and ends Al and what did you use to glue the Celotex? Steve. Hi Steve, the sides and ends were made 100mm deep - i.e. twice the depth of the foam. I used a solvent-free building adhesive (I think it was from Screwfix) to glue them to the foam. Al. 1 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 12, 2019 Author Share Posted September 12, 2019 (edited) I rather fancy this 1:43 3D model of a 1954 Bristol lorry, which comes as a simple kit but which needs extras like axles, wheels and glazing. Edited October 6, 2022 by Stephenwolsten Added image. 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 12, 2019 Author Share Posted September 12, 2019 (edited) North docks, Liverpool. Edited October 6, 2022 by Stephenwolsten 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 12, 2019 Author Share Posted September 12, 2019 Exceptional NG modelling for Plettenberg light railway. 7 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 12, 2019 Author Share Posted September 12, 2019 (edited) A slightly different view of the scene that has inspired my layout interest, featuring the Lancastrian rail tour. The dock police were in a good mood and let some photographers into the dock estate to photograph the special excursion train. Photograph courtesy of Dave Rogers?. Edited October 6, 2022 by Stephenwolsten Amended credit. 4 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 14, 2019 Author Share Posted September 14, 2019 (edited) The sun always shines in Liverpool. Isn't the internet wonderful! A photographer took this picture out of interest and years later I find it useful for modelling the distinctive MDHB lamp posts. (Please see 16 June 2019 post too). This view confirms the shape of the lanterns. Now I need a 'cottage industry' manufacturer of small architectural parts to supply some complete lights with columns ............. Edited October 18, 2022 by Stephenwolsten Date added. 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 16, 2019 Author Share Posted September 16, 2019 (edited) I wonder what is the best way to model a few feet of a brick wall that accurately represents this view of the 13 ft high dock wall in Liverpool? Edited September 16, 2019 by Stephenwolsten Added image. Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 25, 2019 Author Share Posted September 25, 2019 In 2001 Iain Rice asked, in his book Designs for Urban Layouts, 'why has the urban railway received such short shrift from modellers'? Things have improved a lot since then, but there is still some truth in the question. The idealised countryside where it never rains is still a common sight at exhibitions! American and Continental modellers seem to have modelled urban scenes more than UK ones, but in some cases - for example Germany and Switzerland - the results are a bit 'twee'. The concept of Atlantic Dock was inspired by an actual location - East Princes Half Tide Dock in Liverpool - but it shares many of Iain Rice's thoughts. For example, he noted that seaport cities offer rich pickings for railway modellers, with dock lines of inset track diving off into a complex riverside jungle of quays, transit sheds, warehouses and goods yards. He identified paved track in granite sets as the signature of the urban/dock railway if ever there was one. And he emphasised the vertical scope of urban railways. Multi-level urban railways offer great variety where different railways meet or cross. In the case of Atlantic Dock, the intensive rapid transit of the Liverpool Overhead Railway contrasts with the shunting of dockside goods traffic below, movements to and from the inland BR depots, and the occasional passenger train on the Riverside Branch. The Overhead is unique and instantly recognisable as Liverpool. But Atlantic Dock will also have other "signature items" that will convey the location and period. The elements that define the essential character of the dockside railway on the Mersey include the cobbles, the lamp posts, the high dock wall and gates, the signage on the transit sheds, massive warehouses, crossings, and of course the L&Y Pugs. I also think that an eye-level viewpoint with a diorama approach involving a fairly fixed viewpoint will be very suitable for Atlantic Dock. I want people to view the scene across the layout from the quayside, rather than from above as a seagull. And practical considerations of space will make it essential to use buildings or part of buildings, such as transit sheds, to constrain viewing. 2 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 This is a useful little edited clip of sound effects at Liverpool docks. It's a pity it is so short but I can trace the longer source film easily. 1 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 (edited) Has anyone tried Redutex 3D self-adhesive texture sheeting please? I have seen the earlier thread some years ago, plus this useful image of the material used on the Kingfisher Wharf layout. This product could save days of work clay modelling. https://redutex.com/en/0-1-scale/822-032ad111-cobblestone-8435570201137.html Edited October 11, 2022 by Stephenwolsten 4 Link to post Share on other sites More sharing options...
RMweb Premium Dave John Posted September 27, 2019 RMweb Premium Share Posted September 27, 2019 I have used the 4mm version. This is how it looks when laid; I ordered directly from Redutex in spain when UK stocks were low. It needs to be cut with something very sharp and the surface on which it is laid needs to be decent, any wee blemishes show through. The nearest thing I can liken it to is laying 1 mm thick lino. I also gave the surface to which I was sticking it (thin card in the case of that bridge) a wash over with dilute pva to prepare it. 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 This display in the Liverpool Museum includes the area around Princes Half Tide Dock that I am most interested in. 4 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 Surface detail at Princes Dock, Liverpool. 4 Link to post Share on other sites More sharing options...
aac Posted September 27, 2019 Share Posted September 27, 2019 On 16/09/2019 at 16:08, Stephenwolsten said: I wonder what is the best way to model a few feet of a brick wall that accurately represents this view of the 13 ft high dock wall in Liverpool? I would use MS Paint, a standard, easy to use facility on your PC. You could reproduce this photo above and be sticking it or chosen portions of it onto a plasticard backing in a couple of minutes. Move the captured image (via CTRL+PRINT SCREEN) through the MS Paint programme into a blank WORD document, Print as large or small as you need (If you go to VIEW on the top of WORD toolbar and select GRIDLINES, these will show on the image but not appear on it when you print. This will allow you to size it for scale by dragging the corner of the image on the WORD doc. I find one grid square equal to about 9 scale inches in 4mm scale, so you can play around and adjust for any scale). I then print whatever is required, and cut it out, using printer paper, not photo paper, to keep it matt. I then brush liquid poly onto the back of the printed image and it can dry if it chooses to. Then lay it on plasticard and re-soak the image with liquidpoly. This goes through the paper and sticks it onto plasticard. If not fully fixed, give it a minute and the add more liquidpoly. BE WARY - ENSURE GOOD VENTILATION. You will now have the brickwork you had in the photo fixed to plasticard which you can trim as necessary. Align another print-out of the wall and by joining print-outs you can make it as long or as high as you need. I copy photos of signs, make my own signs in Powerpoint and copy those across, and lift bits of useful photos I find or took myself. Once you get used to MS Paint and the transfer to WORD, it is very quick and easy. You would get about 18 scale feet width of brickwork from the above photo. aac 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 Birkenhead MDHB dock lines in 1958, showing useful detail in colour. This is all the greenery there will be on my proposed layout! Photograph courtesy of Dave Rogers' Flick site. 1 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 Scale drawing of capstan for MDHB. 2 Link to post Share on other sites More sharing options...
Stephenwolsten Posted September 27, 2019 Author Share Posted September 27, 2019 (edited) The type of capstan illustrated above. Edited October 6, 2022 by Stephenwolsten 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now