mswjr Posted July 14, 2017 Share Posted July 14, 2017 10 2 Link to post Share on other sites More sharing options...
mswjr Posted July 14, 2017 Author Share Posted July 14, 2017 Hope you like it,5 years work,Valve gear based on the Metro,all body work made from pictures,as no G,A or drawings available for this loco,Built to 5 inch gauge, And i will be steaming it,and running on all the club tracks from here in cheltenham to southampton, as did the full size 7 Link to post Share on other sites More sharing options...
Killian keane Posted July 14, 2017 Share Posted July 14, 2017 (edited) Exquisite! looks like a furness railway E1 or similar (?) I'm guessing an elderly LSWR prototype? an inspiring piece of workmanship indeed and its always great to see people deviating from the norm *cough* br standard classes*cough* Edited July 14, 2017 by Killian keane 3 Link to post Share on other sites More sharing options...
Grasshopper John Posted July 15, 2017 Share Posted July 15, 2017 What a beauty, First time I've seen a thread on RM showing the finished article, did you do a build thread at all. Lovely workmanship, Oh and make sure to make a video when you steam her up and post on here please. 1 Link to post Share on other sites More sharing options...
mswjr Posted July 15, 2017 Author Share Posted July 15, 2017 Exquisite! looks like a furness railway E1 or similar (?) I'm guessing an elderly LSWR prototype? an inspiring piece of workmanship indeed and its always great to see people deviating from the norm *cough* br standard classes*cough* Killian,It is a MSWJR 2-4-0,built by Dubbs,They had 3 2-4-0s,no 10,11,12, This one is no 12,I had no drawings to work too,I had a GA of the loco side,I built it just by looking at pictures of the locos,and the valve gear and cylinders were made from a similar size loco,Metro by Martin evans, I have no build thread,but i do have some build photos, so ill dig them out and put some on here,Steam test and first run at the end of next week ,i hope,so yes ill try and put up some shots or video. Thanks for the comments Garry 2 Link to post Share on other sites More sharing options...
Giles Posted July 16, 2017 Share Posted July 16, 2017 Good luck with your steam test - a stressful time! But you'll have a great time behind her! Link to post Share on other sites More sharing options...
dajt Posted August 23, 2017 Share Posted August 23, 2017 A beauty! You're brave working from just photos and a side-on GA. You must be very proud of your work and I hope it steams and runs well. Link to post Share on other sites More sharing options...
Administrators Phil Parker Posted August 23, 2017 Administrators Share Posted August 23, 2017 Killian,It is a MSWJR 2-4-0,built by Dubbs,They had 3 2-4-0s,no 10,11,12, This one is no 12,I had no drawings to work too,I had a GA of the loco side,I built it just by looking at pictures of the locos,and the valve gear and cylinders were made from a similar size loco,Metro by Martin evans, I have no build thread,but i do have some build photos, so ill dig them out and put some on here,Steam test and first run at the end of next week ,i hope,so yes ill try and put up some shots or video. Thanks for the comments Garry If you have build photos and would like to put a few words together to accompany them, I'd be delighted to put them in Engineering in Miniature. Let's give quality workmanship as much publicity as possible! 1 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 Thankyou for the comments guys,much appreciated,I have steamed her about six times now at the local club,and she runs very well so i am happy with her, I do have some photos (somewhere) I will try and dig them out and tell you how i did it, Thankyou Garry Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 These are the only ones that i can find,infact i do not think that i took anymore as i was more interested in building and finishing it than recording it,I was also building a 5 inch gauge manor at the same time, So how did no 12 come around,Well a friend of mine builds 7 1/4 gauge locos Graham white,and he likes the mswjr,about 30 odd years ago i was thinking of doing a 5 inch gauge metro, I got the drawings but did not start it,I think i built an allchin traction engine instead,So i gave them to my friend Graham,He said he was going to build a mswjr 2-4-0 as it was the same wheel arrangement and wheel base as the Metro,He cutout the frames from photos of the loco in the rebuilt gwr guise,and had the wheels cast,Then put it under the bench ,and went on the build two 7 1/4 inch standards 5s so 30 odd years later i was getting heavily into the mswjr as it was a local line to me,and my mate Graham said i have a part built chassis under my bench that is a mswjr engine and i bought it straight away,He also made some boiler formers, Well without thinking about it too much ,just knew i wanted an engine from this railway,I got the chassis running on air,all the running gear is metro,only the reversing lever is made different ,but that was made near the build end,as it is connected to the wheel splasher,Once i had it running on air,I contacted Mike Barnsley ,He has written books on the mswjr locos and wagons,He helped a great deal with photos and some info that he knew,But no drawings at that time,so i made things like the buffers to to known dimensions of other similar locos at the time,a lot of lswr locos had similar looking parts like the chimney and dome,Plate work was quite easy mostly made of card first then made of brass,Think i have quite a bit in the scrap box thou,All cab work and splashers were made mostly fron loco photos and by eye,my thinking was if it looks right then that will be good enough for me,The cab detail was made up by copying other period locos,The only thing i knew for sure was that this loco no 12, 11 and 10 had two water gauges . As for the boiler ,Well i decided not to make it my self as i thought i may have trouble with building a non published design ,so i went to Southern boilers,Gave him all the info that i had,ie,boiler diameter and water gauge position ,dome and safety valve position etc,and two years later i had a boiler,and it fitted the frames,Yes i would change a few things on it like the cladding being skimpy in places and the reversing lever being very close,but all in all very happy with it,But worried that it would not steam good as im making the ashpan and great up as i go along,all to look like the full size loco in the photos, Getting thing to fit in the smokebox was lets say ,im not doing that again,and not looking forward to its removal if it has to have one, The tender was built by again just looking at photos of the loco,frames were sized just by eye,(and the buffer height come out the same as the loco),The tender top looked to me like the Glen tender, so i had Model engineers laser cut out the glen tender without the taps and slots and with some work it looks the part,shortly after i finished the tender i managed to get hold of a tender drawing as these tenders were used on other scottish region locos,My tender was pretty close to this but i had the coal plate angles wrong,But all looks well when it is full of coal. All the painting and lining were done by myself ,looks better in the pictures than it is,I found the lining very hard to do,but i want to play with it and not show case it so im quite happy , Then it came to its first steam up,,On the garden table,myself and my friend Graham,Engine jacked up on wood,she steamed great first time,just some small issues like the lubricator to be adjusted, oh and commercial injectors,These were not good,but all sorted now,passed steam test first time,and she runs great,Very happy,big smile everytime i steam her,My plan is to steam her on every track from cheltenham to southampton as did the full size loco,hope this info is interesting for you all . Garry 1 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 (edited) PG]some more photos Edited August 23, 2017 by mswjr 2 3 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 3 2 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 2 2 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 3 2 Link to post Share on other sites More sharing options...
mswjr Posted August 23, 2017 Author Share Posted August 23, 2017 4 1 Link to post Share on other sites More sharing options...
mswjr Posted August 24, 2017 Author Share Posted August 24, 2017 and one on the track 6 2 Link to post Share on other sites More sharing options...
Grasshopper John Posted August 24, 2017 Share Posted August 24, 2017 Gary, shame there isn't a Brilliant/Fantastic button, Hope you take up Phil's offer and get it published it's worth it. Link to post Share on other sites More sharing options...
RMweb Gold Huw Griffiths Posted August 24, 2017 RMweb Gold Share Posted August 24, 2017 Gary, shame there isn't a Brilliant/Fantastic button, Hope you take up Phil's offer and get it published it's worth it. I agree. (However, there is a "craftsmanship / clever" flag, which strikes me as having a similar meaning here - so I've used it.) Huw. Link to post Share on other sites More sharing options...
John lewsey Posted August 26, 2017 Share Posted August 26, 2017 Wonderful Link to post Share on other sites More sharing options...
Administrators Phil Parker Posted September 22, 2017 Administrators Share Posted September 22, 2017 Just to confirm, I've just sent a superb piece on this loco over to design last night. Look out for it in the November issue of EiM! 2 Link to post Share on other sites More sharing options...
Grasshopper John Posted September 22, 2017 Share Posted September 22, 2017 Just to confirm, I've just sent a superb piece on this loco over to design last night. Look out for it in the November issue of EiM! Excellent News well done and well deserved Gary, Not familiar with EiM, Is that Engineering in Minature ??? Link to post Share on other sites More sharing options...
Georgeconna Posted September 22, 2017 Share Posted September 22, 2017 Wow, Thats a beauty, It would take me 5 years to finish an airfix kit. I dread to think how long a project like this would take! Link to post Share on other sites More sharing options...
Administrators Phil Parker Posted September 22, 2017 Administrators Share Posted September 22, 2017 Excellent News well done and well deserved Gary, Not familiar with EiM, Is that Engineering in Minature ??? Yes it is. Link to post Share on other sites More sharing options...
mswjr Posted June 9, 2019 Author Share Posted June 9, 2019 I was asked to put a video on here of the loco running, I have no idea how to do that ,But my son has done one so here it is, The loco is run most weekends and looks quite workworn in places ,Hope you like it. Garry 8 Link to post Share on other sites More sharing options...
dajt Posted June 16, 2019 Share Posted June 16, 2019 Excellent! It sounds good. 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now