25901 Posted December 29, 2020 Share Posted December 29, 2020 If we are going into the small detail and talking about body pipe work, are the pipes for the toilet there that the Peaks had, no I’m not thing the pi@@ lol 1 Link to post Share on other sites More sharing options...
47423 Posted December 29, 2020 Share Posted December 29, 2020 2 hours ago, Willoughby Glen said: Antics have good prices on 45040 (123.20, sound 199.70) and 45049(129.95, sound 209.95) postage extra I caved in and got 049 too Link to post Share on other sites More sharing options...
aureol40012 Posted December 29, 2020 Share Posted December 29, 2020 3 hours ago, Willoughby Glen said: Antics have good prices on 45040 (123.20, sound 199.70) and 45049(129.95, sound 209.95) postage extra Indeed they have, as I mentioned on here last Thursday (a couple of pages back) ;-) Thought 45040 might be a pricing error but it was despatched same say (24th) and I’m expecting it tomorrow! Link to post Share on other sites More sharing options...
aureol40012 Posted December 30, 2020 Share Posted December 30, 2020 Well, it certainly looks like a 45! For £124 I’m not going to complain. Have ordered Fox etched plates as they came with the regimental crest, just hope the Bachmann print isn’t oversized..... 16 Link to post Share on other sites More sharing options...
Mophead45143 Posted December 31, 2020 Share Posted December 31, 2020 Yep, my 45040 arrived this morning and I'm very pleased with it. Despite also ordering 45022 and the fact the majority of peaks still had headcode boxes in my modelling period, I am tempted to get another! Ok the Bachmann tooling doesn't have all the bells and whistles, but my god it looks and feels like a peak! Cameron 3 1 Link to post Share on other sites More sharing options...
Global Posted December 31, 2020 Share Posted December 31, 2020 I was planning on getting some of the Heljan models until I saw the mess they’ve made if the shape! These really do look the part and I hope that they follow it up with some later 45/1s with headlights at some point soon. 1 Link to post Share on other sites More sharing options...
woodenhead Posted December 31, 2020 Share Posted December 31, 2020 I am quietly pleased that Bachmann turned these out before the Heljan ones, they've taken a bit of a battering of late from other companies proposing new models that compete with them and it looked like they were not able to fight back quickly enough, but perhaps the tide has now turned. I do hope this means something is coming down the line in N gauge, nice Next18 chassis, speaker etc. 1 1 Link to post Share on other sites More sharing options...
Hastings Thumper Posted December 31, 2020 Share Posted December 31, 2020 Very pleased with my 45022 that turned up this morning. Already on shed with class mate 45120. 11 Link to post Share on other sites More sharing options...
rob D2 Posted December 31, 2020 Share Posted December 31, 2020 7 hours ago, woodenhead said: I am quietly pleased that Bachmann turned these out before the Heljan ones, they've taken a bit of a battering of late from other companies proposing new models that compete with them and it looked like they were not able to fight back quickly enough, but perhaps the tide has now turned. I do hope this means something is coming down the line in N gauge, nice Next18 chassis, speaker etc. Hmmm, yes but they showed zero enthusiasm to re release a sealed beam one before Heljan announced theirs ? reactionary rather than proactively... 3 1 Link to post Share on other sites More sharing options...
lyneux Posted December 31, 2020 Share Posted December 31, 2020 35 minutes ago, rob D2 said: Hmmm, yes but they showed zero enthusiasm to re release a sealed beam one before Heljan announced theirs ? reactionary rather than proactively... That's what I thought at first but now I'm not so sure. This has the feel of announcing something a little early that had probably been planned for a while. Guy 1 1 Link to post Share on other sites More sharing options...
woodenhead Posted January 1, 2021 Share Posted January 1, 2021 Question is, is there a 25 and a 47 in redevelopment too? Link to post Share on other sites More sharing options...
RMweb Gold adb968008 Posted January 1, 2021 RMweb Gold Share Posted January 1, 2021 (edited) 1 hour ago, woodenhead said: Question is, is there a 25 and a 47 in redevelopment too? Bachmann do have a 25/2 in development. https://www.Bachmann.co.uk/product/class-25-2-d5282-br-two-tone-green-(small-yellow-panels)/32-341 I think thats going to be a crowded space, as its not a big leap for SLW to fill, and Heljan are about to deliver their own class 25 variants. That said, we are only 90 days away now, from the 30th anniversary of 1Z45 ... the last class 25 railtour... is 2021 year of the Rat ? Edited January 1, 2021 by adb968008 Link to post Share on other sites More sharing options...
Zunnan Posted January 1, 2021 Share Posted January 1, 2021 2 hours ago, adb968008 said: Bachmann do have a 25/2 in development. Don't forget the 25/1 announced at the same time, both some 6 months before Heljan came in with their 25. So we can't really say Bachmann were being reactive considering they laid out their stall for the two main 25 body styles, and presumably will allow the boiler fitted 083-087 somewhere along the lines as well (still no 25/0 though, SLW?), considerably earlier than Heljan put their eggs into just one Rat nest. 1 Link to post Share on other sites More sharing options...
woodenhead Posted January 1, 2021 Share Posted January 1, 2021 6 hours ago, adb968008 said: Bachmann do have a 25/2 in development. https://www.Bachmann.co.uk/product/class-25-2-d5282-br-two-tone-green-(small-yellow-panels)/32-341 I did not know that, don't get tempted W, you're doing N gauge now. Link to post Share on other sites More sharing options...
andyman7 Posted January 2, 2021 Share Posted January 2, 2021 My second one 'Lytham St Annes' turned up today. Lovely looking loco although on mine I immediately spotted that the boiler port cover was missing one side - not loose in the box or anything so presumably left off when assembled. Anyhow I range TMC from whom it was bought, they are going to try and just send the part (taken off another loco I expect). It's the first Bachmann model I've bought in a while that had any sort of issue so I guess it's within the law of averages. Link to post Share on other sites More sharing options...
Covkid Posted January 2, 2021 Share Posted January 2, 2021 On 28/12/2020 at 15:34, adb968008 said: The edge the Heljan model has, is indeed some pipe detail at the fuel tanks (on the under frame bogie sides, rather than visible body side. It also has a few isolating switches etc on the bottom of the body side, as well as the eth sockets on the front buffer beam and an orange pipe running between and under the buffers. There are also door hinges on the cabs. A little pedance here - the BR/Sulzer 4s had their fuel tanks inside the bodyshell at the number 1 end with solebar level connections. This made it a little more awkward for fitting staff to fuel them because they needed to climb up into the No 1 end cab, and through the bulkhead door to check the internal fuel gauge. The easy solution was to let the fuel fill the tanks, then when the fueller spotted the fuel trickling down from the roof mounted over flow valve the loco could be indentified as full This spilt diesel on the bodysides was a recognisable feature of the BR/Sulzer 4s per this https://farm66.static.flickr.com/65535/50211355721_3f5159463a.jpg 3 Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted January 2, 2021 RMweb Gold Share Posted January 2, 2021 Just run in my 45040 and it is a lovely model, but why oh why did Bachmann fit bright white LEDs? Really spoils the look of the lighting. It is not rocket science to specify different colours of LED to suit the prototype. Roy 1 2 Link to post Share on other sites More sharing options...
owentherail Posted January 2, 2021 Share Posted January 2, 2021 24 minutes ago, Roy Langridge said: Just run in my 45040 and it is a lovely model, but why oh why did Bachmann fit bright white LEDs? Really spoils the look of the lighting. It is not rocket science to specify different colours of LED to suit the prototype. Roy Yes I was going to put some yellow sweet rapping paper around LED ..... quality street to be exact 1 1 1 Link to post Share on other sites More sharing options...
cravensdmufan Posted January 2, 2021 Share Posted January 2, 2021 (edited) 1 hour ago, Roy Langridge said: Just run in my 45040 and it is a lovely model, but why oh why did Bachmann fit bright white LEDs? Really spoils the look of the lighting. It is not rocket science to specify different colours of LED to suit the prototype. Roy Totally agree. It's always been a problem - very unprotypical to see bright lights of any colour shade on older locos and DMUs. Despite using DCC and reducing brightness CVs to the very minimum, they are still way too bright. On the real locos (apart from high density halogen headlights) lights were powered by tungsten bulbs which really just about glowed in the dark! What I have done with all my Bachmann and Hornby diesels and first generation DMUs is to put a small piece of ordinary paper type masking tape over the lens and colour that with a black Sharpie pen. Very "Heath Robinson" but it works! And because the LED doesn't get warm the masking tape doesn't scorch! Edited January 2, 2021 by cravensdmufan Additional wording 4 1 Link to post Share on other sites More sharing options...
Wolf27 Posted January 2, 2021 Share Posted January 2, 2021 On 01/01/2021 at 11:39, adb968008 said: Bachmann do have a 25/2 in development. https://www.Bachmann.co.uk/product/class-25-2-d5282-br-two-tone-green-(small-yellow-panels)/32-341 I think thats going to be a crowded space, as its not a big leap for SLW to fill, and Heljan are about to deliver their own class 25 variants. That said, we are only 90 days away now, from the 30th anniversary of 1Z45 ... the last class 25 railtour... is 2021 year of the Rat ? Without taking the topic any further off the 45, SLW have had plenty of time to produce a 25/1 or a 25/2 but as their intention is to go through the 24/25 family in order, it could be another 3-4 years before we see a 25 in any variant from SLW. One the Bachmann revised 25 appears it will render the Heljan model obsolete in terms of shape, DCC functionality, detail and finish. However this is all better discussed I think he relevant topics. cheers Shane Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted January 3, 2021 RMweb Gold Share Posted January 3, 2021 17 hours ago, cravensdmufan said: Totally agree. It's always been a problem - very unprotypical to see bright lights of any colour shade on older locos and DMUs. Despite using DCC and reducing brightness CVs to the very minimum, they are still way too bright. On the real locos (apart from high density halogen headlights) lights were powered by tungsten bulbs which really just about glowed in the dark! What I have done with all my Bachmann and Hornby diesels and first generation DMUs is to put a small piece of ordinary paper type masking tape over the lens and colour that with a black Sharpie pen. Very "Heath Robinson" but it works! And because the LED doesn't get warm the masking tape doesn't scorch! Brightness doesn't bother me too much as it is simple to stick a resistor in-line with the wire, but if it is the wrong colour you are left having to change the LED or get a filter in place. Roy 1 Link to post Share on other sites More sharing options...
rob D2 Posted January 3, 2021 Share Posted January 3, 2021 I tend to paint the bright LEds with warning panel yellow or use a yellow sharpie 3 Link to post Share on other sites More sharing options...
cravensdmufan Posted January 3, 2021 Share Posted January 3, 2021 3 hours ago, Roy Langridge said: it is simple to stick a resistor in-line with the wire Roy Not so simple for me I'm afraid! I'll stick to my tried and trusted method of the masking tape coloured with a felt pen! Link to post Share on other sites More sharing options...
lwnameplates Posted January 3, 2021 Share Posted January 3, 2021 26 minutes ago, cravensdmufan said: Not so simple for me I'm afraid! I'll stick to my tried and trusted method of the masking tape coloured with a felt pen! taking advice from people on rmweb iv found clear Perspex (toy packing ect) and painted them with acrylic yellow in coats depending on each loco my western could do with a few more coats but it does me, i have left the 68 alone as they have LEDs anyway so actually they aint wrong really. 4 Link to post Share on other sites More sharing options...
SouthernBlue80s Posted January 3, 2021 Author Share Posted January 3, 2021 Probably a bit early doors for this question. Has anyone tried removing the nameplate and factory fitted numbers yet and renumbering one? I would be interested to find out if it is a of one where the numbers come of relatively easily. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now