pwr Posted August 13, 2019 Author Share Posted August 13, 2019 And in other news. I have made up the boards but underestimated the supply of wood! I am 4 bits short on the bracing which will now have to wait until Thursday when the wife is also on leave so I can get some more from the timber merchants. In the meantime I can get on with the legs and the wiring. Given only two wires needs to cross the new scenic board and into the fiddle yard I am going to use the board catches as electrical feeds. The cassettes will be powered using copper tape stuck to the board which will contact with another bit under the cassette folded round and set under the aluminium channel. Simply putting the cassette in position will mean it is live. pushing it away will make it dead. I'll explain more when I do the photos. I am packing up for the day. Tomorrow its supposed to rain so it will be indoor work. Hopefully I can get the track down on the new board. All for now Paul R 1 1 Link to post Share on other sites More sharing options...
pwr Posted August 14, 2019 Author Share Posted August 14, 2019 Its raining here in Sussex today so I can't get outside to make the legs. So as an alternative I am getting a bit of wiring done on the extension boards. AS promised here is a photo of the wire attached to the clips. I think this is a rather neat way of getting power across a board end. I am thinking of covering the wire in hot glue to protect it from getting snagged. Anyhow more next time Paul R 1 2 Link to post Share on other sites More sharing options...
Andrew P Posted August 14, 2019 Share Posted August 14, 2019 3 hours ago, pwr said: Its raining here in Sussex today so I can't get outside to make the legs. So as an alternative I am getting a bit of wiring done on the extension boards. AS promised here is a photo of the wire attached to the clips. I think this is a rather neat way of getting power across a board end. I am thinking of covering the wire in hot glue to protect it from getting snagged. Anyhow more next time Paul R Now that is BLOOMIN CLEVER Paul, what a brilliant idea mate, well done. Link to post Share on other sites More sharing options...
pwr Posted August 14, 2019 Author Share Posted August 14, 2019 Andy When I started this layout it was supposed to be simple to set up and operate with minimal wires across each board. The most I have is via 2 8 pin DIN plugs. 1 DIN plug links the other boards apart from these latest ones where all I need are two wires! There are no points on these or thee planned further extension at the Braintree end. Because of that there are three CDU's, one for each board where there are point controls! A 12v DC control bus runs along the whole layout and some boards have additionally a 20v AC bus for the points. It would actually be easy to convert this to DCC since all bits of rail already have a feed. However I am not going that way currently although I do admire these diesel sound layouts. DCC without sound is a non starter for me but sound just gives it an extra dimension although I remain unconvinced about steam sounds I have heard so far. There are some more recent ones that sound good and I think this is more to do with better speakers rather than the sound files themselves. Wait till you see the cunning plan for the cassettes! Paul R 1 Link to post Share on other sites More sharing options...
RMweb Premium Clive Mortimore Posted August 14, 2019 RMweb Premium Share Posted August 14, 2019 15 minutes ago, pwr said: Andy When I started this layout it was supposed to be simple to set up and operate with minimal wires across each board. The most I have is via 2 8 pin DIN plugs. 1 DIN plug links the other boards apart from these latest ones where all I need are two wires! There are no points on these or thee planned further extension at the Braintree end. ................much edited................... Paul R Having lived for many years in Essex, Colchester, Witham, Chelmsford and mainly Little Waltham, I fully agree their is no point in Braintree. 2 Link to post Share on other sites More sharing options...
Andrew P Posted August 14, 2019 Share Posted August 14, 2019 (edited) 10 minutes ago, Clive Mortimore said: Having lived for many years in Essex, Colchester, Witham, Chelmsford and mainly Little Waltham, I fully agree their is no point in Braintree. Having visited Braintree Station when my Daughter lived there, all I can say is...………...UNDERWHELMED, and totally pointless. Edited August 14, 2019 by Andrew P add words 3 Link to post Share on other sites More sharing options...
Andrew P Posted August 14, 2019 Share Posted August 14, 2019 Hi Paul, Thanks for subscribing to my You Tube channel. I'll try and get some more done soon. Link to post Share on other sites More sharing options...
raymw Posted August 14, 2019 Share Posted August 14, 2019 5 hours ago, pwr said: AS promised here is a photo of the wire attached to the clips. I think this is a rather neat way of getting power across a board end. I am thinking of covering the wire in hot glue to protect it from getting snagged. Anyhow more next time Paul R I guess you could replace the screw with a bolt straight through, and clamp the wire on the back between a couple of washers and nut. Save on the hot glue, and drilling a hole for the wire (but need to drill hole for the bolt..) 1 Link to post Share on other sites More sharing options...
pwr Posted August 15, 2019 Author Share Posted August 15, 2019 13 hours ago, raymw said: I guess you could replace the screw with a bolt straight through, and clamp the wire on the back between a couple of washers and nut. Save on the hot glue, and drilling a hole for the wire (but need to drill hole for the bolt..) Yes that may be possible but there is a bracing strip behind the fixing. I am going to use that method on the cassette connection. Next time I should plan it better! Paul Link to post Share on other sites More sharing options...
pwr Posted August 15, 2019 Author Share Posted August 15, 2019 Well today has been spent working on the new scenic board and I am pleased to say the track is down fixed and wired with power flowing through the board clips. No work done on the new fiddle yards but the weather tomorrow is predicted to be bad. However I can now work on the new scenic board separately and I can do that indoors once painted. Anyhow here are the pictures from today's activities. The extensions will mean that the layout is now 33 feet long and will be 40 feet once the phase 5 extensions go in at the Braintree end. However the concept is that it can be exhibited with or without these 2 new boards. Anyhow all for today Paul R 8 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted August 15, 2019 RMweb Gold Share Posted August 15, 2019 Looking great! 2 Link to post Share on other sites More sharing options...
pwr Posted August 20, 2019 Author Share Posted August 20, 2019 Not much to report so far this week. I have painted the track on the new boards. I am not going to ballast it yet as I want to get the entire layout up this week. I can do ballasting in the house! I have also finished the remaining support cross pieces on the Braintree Fiddle yard. I ha e official permission to make the legs today and I have the wood in stock although I noticed the other day that one of the pieces cut for me is the shape of a banana despite careful checking at the timber merchants. Once that's done I will connect up the Witham end fiddle yard and finish the wring. Them I will try and build some more cassettes before the whole layout goes up and the Braintree end fiddle yard is installed which is currently planned for Friday. Friday is the official running day so I hope to get plenty of photos and video. Paul R 3 Link to post Share on other sites More sharing options...
westerner Posted August 20, 2019 Share Posted August 20, 2019 looking forward to them Paul. Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 Well yesterday was fine if a little too warm but it enabled us to get the layout up in its entirety for the first time ever including to 2 new extension boards. Despite not being used in a year it worked - mostly. Have a feed problem at the Witham end point and a couple of point motors that are not firing properly. This first photo shows the layout from the Witham end. The new run in extension board is shown and the current transfer through the board toggle catches works well. The second photo shows the copper strips that will take the current to the cassettes. I have not modified these as yet but I did note the cassettes are slightly warped but the weight of the loco and train should sort that out. I need to drill through and place bolts with washers to which I will connect the current from the toggle catches. As soon as you place a cassette on the copper it should be live. Once I get some modified I will report back but the picture is almost self explanatory. The third photo of this batch shows the crossing area with the new 1/43 scale bus at the bus stop. I must say its so much better than the 1/50 models. I didn't unfortunately get a chance to try the new Oxford Weymann out. I am going to post in batches so that was the first. Paul R 3 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 (edited) Here are a couple of the signal box in position. This third one shows the 04 which was the first 0 Gauge item I ever built and although it got damaged by falling out of a van I still have a sentimental attachment to it despite the fact various bits are missing. The light shows off the layout well. Paul R Edited August 24, 2019 by pwr 6 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 A video now. Two class 15's are on the milk Paul R 3 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 And this one is especially for Andy Peters showing the Peak on vans. Andy - you really need one of these! Paul R 2 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 More stills. The first shows the full extent of the layout from the other end. This second one shows the almost complete extent of my oil train - only the Heljan is not shown. Now what's this Western doing parked up on a GER branch Paul R 4 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 Another one of the class 15's on the milk. The slowing down is the dead bit of the track which I need to resolve Paul R 3 Link to post Share on other sites More sharing options...
Andrew P Posted August 24, 2019 Share Posted August 24, 2019 Just had a peak at your Peak Paul, it does look nice, I must admit, but the Bank Manager says NOOOOOOOOOOOOoooooooooooooooooooooooo The Layout looks excellent mate, just need to build a canopy over so that it can be set up permanently. Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 The next image is a replica of the North Elmham milk train as immortalised in some of the late Frank Church photo collection. I always wanted to model this and there are so many haulage combinations including the J15 which I have yet to build! The Claude is an old SM Models Kit which was pig to build but the end result was worth it And then two more of the pair of Class 15's. I also have one of these with full yellow ends. I must get round to fixing the drooping post box Paul R 3 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 3 minutes ago, Andrew P said: Just had a peak at your Peak Paul, it does look nice, I must admit, but the Bank Manager says NOOOOOOOOOOOOoooooooooooooooooooooooo The Layout looks excellent mate, just need to build a canopy over so that it can be set up permanently. Yes that would be good. Loads more work to do though. The next building will be a model of the real Cressing Station Paul R 1 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 Here is the Claude on the milk The loco needs a good running in and an oil Paul R 2 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 A couple of the Western on the milk This was the first time this loco had run Ballast doesn't look too bad Paul R 2 Link to post Share on other sites More sharing options...
pwr Posted August 24, 2019 Author Share Posted August 24, 2019 The green 08 on vans. These are all Dapol and need weathering. The brake van is a Slaters kit Paul R 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now