scratcher Posted February 10, 2018 Share Posted February 10, 2018 (edited) I'm in the middle of upgrading the Hornby GW H33 restaurant coach as has been done by several of you on this forum. Using a new Hornby Collett underframe and ends; the sides, roof and interior are from the original. I have some specific questions on the interior detail. If I've missed earlier posts that answered some of the questions I apologise (I did trawl the relevant threads before posting, honestly ). Questions all relate to the condition before the 1939 refurb when they got the larger sunshine windows. - Curtains. Did they have curtains before the 1939 refurb (the photo in GW Coaches Appendix Vol 2 is post refurb)? If so, first or both, and what colours? - Seat colours for first and third? There's some info in GWCA V2 but nothing specifically about the H33. - Did third have table cloths or was it just first? - Colour of lamp shades in first? I will post pictures as work progresses. Thanks Steve Edited February 10, 2018 by scratcher 1 Link to post Share on other sites More sharing options...
scratcher Posted August 27, 2018 Author Share Posted August 27, 2018 I'm in the middle of upgrading the Hornby GW H33 restaurant coach as has been done by several of you on this forum. Using a new Hornby Collett underframe and ends; the sides, roof and interior are from the original. I have some specific questions on the interior detail. If I've missed earlier posts that answered some of the questions I apologise (I did trawl the relevant threads before posting, honestly ). Questions all relate to the condition before the 1939 refurb when they got the larger sunshine windows. - Curtains. Did they have curtains before the 1939 refurb (the photo in GW Coaches Appendix Vol 2 is post refurb)? If so, first or both, and what colours? - Seat colours for first and third? There's some info in GWCA V2 but nothing specifically about the H33. - Did third have table cloths or was it just first? - Colour of lamp shades in first? I will post pictures as work progresses. Thanks Steve After a long gap when a higher priority project took my time (http://www.rmweb.co.uk/community/index.php?/topic/134314-nucast-lner-a5-4-6-2t-build/), I've started to think about this again. I'm still looking for some answers to the above questions, if anyone is able to help. Steve 1 Link to post Share on other sites More sharing options...
kandc_au Posted September 15, 2018 Share Posted September 15, 2018 After a long gap when a higher priority project took my time (http://www.rmweb.co.uk/community/index.php?/topic/134314-nucast-lner-a5-4-6-2t-build/), I've started to think about this again. I'm still looking for some answers to the above questions, if anyone is able to help. Steve Steve, Do you have access to Great Western Way? If so I think you will find a lot of that detail there. Sorry it is not much help but I am in the same boat as you trying to source info. Khris 1 Link to post Share on other sites More sharing options...
Il Grifone Posted September 16, 2018 Share Posted September 16, 2018 (edited) Information about interior colours seems scarce. I am never sure what colours to paint interiors. Edited October 7, 2018 by Il Grifone 1 Link to post Share on other sites More sharing options...
scratcher Posted January 3, 2019 Author Share Posted January 3, 2019 Steve, Do you have access to Great Western Way? If so I think you will find a lot of that detail there. Sorry it is not much help but I am in the same boat as you trying to source info. Khris Thanks Khris I have ordered a copy. Steve Link to post Share on other sites More sharing options...
scratcher Posted April 19, 2020 Author Share Posted April 19, 2020 (edited) Finally finished this, other projects bumped it for a while. The biggest inaccuracy is the continuous running board courtesy of the Hornby Collett donor. Edited April 3, 2022 by scratcher Re-added pictures 8 11 Link to post Share on other sites More sharing options...
Prometheus Posted April 19, 2020 Share Posted April 19, 2020 Nice job. The passengers are quite convincing. Removing the roof-ribs is a faff-and-a-half though! Tony 1 Link to post Share on other sites More sharing options...
scratcher Posted April 19, 2020 Author Share Posted April 19, 2020 Quote 2 hours ago, Prometheus said: The passengers are quite convincing Thanks, I think they were Bachmann. I can't seem to find a decent set of 1930's attired seated passengers. Quote 2 hours ago, Prometheus said: Removing the roof-ribs is a faff-and-a-half though! Yes but worth it. I think the fiddliest thing was the numbering, I can barely see the figures when applying them. Numbers, roundel and lining are Fox, lettering is Pressfix. 1 Link to post Share on other sites More sharing options...
scratcher Posted June 23, 2020 Author Share Posted June 23, 2020 (edited) I've managed to get a couple of coaches done recently so I thought I'd add them here to keep in one place. The K15 is the K's plastic kit. The poor Dean bogies are replaced by American's from MJT, as is second gas cylinder. Dean vacuum cylinder and window grilles from Frogmore. Gas pipes and train alarm gear added. It's useful having the preserved example at Didcot which is only an hour away. They kindly let me round the interior last year. Edited April 3, 2022 by scratcher Re-added pictures 9 3 Link to post Share on other sites More sharing options...
scratcher Posted June 23, 2020 Author Share Posted June 23, 2020 (edited) This is my first attempt at a Gresley coach. Ian Kirk D212 sides onto a Hornby donor chassis, ends and roof. I know the Hornby chassis is slightly too wide, but personally I think the main visual problem is caused by the low ride height. Fix that with a washer and it looks loads better. Teak finish is the method used by Ian Rathbone, painting the D212 sides was the project I took along to his workshop at the Missenden Modellers Spring Weekend 2020. I used PP Golden Teak mixed with Humbrol 62 as the brown. The colour is a bit on the orange side, next time I will use PP Weathered Teak. I have two more lined up, a Bill Bedford D114 and a Bill Bedford D144 (which I will make as a D10C). Edited April 3, 2022 by scratcher Removed pictures 11 1 Link to post Share on other sites More sharing options...
scratcher Posted June 23, 2020 Author Share Posted June 23, 2020 (edited) I picked up a brass part-built GW Monster at a show a couple of years back and finally finished it last month. It was only the chassis/body/ends shell so much scratch building needed. Gas pipes added to roof make a real difference. Queen posts modelled using split pins. (I do wish someone would make decent GW underframe trussing, of both kinds). Edited April 3, 2022 by scratcher Re-added pictures 4 1 4 Link to post Share on other sites More sharing options...
scratcher Posted July 26, 2020 Author Share Posted July 26, 2020 (edited) Next project is finished (bar lamp irons). BSL GWR K38, bought part-built as per first picture. I also bought a BSL GWR underframe kit, but only used the truss rods, V-hangers and dynamo in the end, as the battery boxes and vacuum cylinder were too basic. The truss rods needed filing back to 1mm square from 1.5mm square. Battery boxes from Frogmore. Vacuum cylinders and running boards from spares box. Gangways from MJT. Door handles from Bill Bedford etch. End handrails, gangway arms and door grab handles from Hornby Collett. Bogies from Modern Traction Kits but I would avoid in future and use Hornby. Guards footsteps and hand rails from brass wire. Precision paints. The droplights were sprayed before fitting (I use Golden Teak for the colour). Pressfix transfers for lettering and roundel. Fox for numbers and lining. If I could redo anything I would scribe the doors deeper; by the time three layers of paint are applied they don't show up enough. Maybe applying a black wash can fix that. Edited April 3, 2022 by scratcher Added more build info 7 6 Link to post Share on other sites More sharing options...
RMweb Gold Iain.d Posted July 26, 2020 RMweb Gold Share Posted July 26, 2020 Can you please tell me how / what you made the door hinges from? They look good. A really nice build. kind regards Iain 1 Link to post Share on other sites More sharing options...
richbrummitt Posted July 26, 2020 Share Posted July 26, 2020 Rather than black I would suggest dark grey or dark brown for the door lines. Just a touch of dilute paint wash in there could make them so much more pronounced. 1 Link to post Share on other sites More sharing options...
scratcher Posted July 26, 2020 Author Share Posted July 26, 2020 6 hours ago, Iain.d said: Can you please tell me how / what you made the door hinges from? They look good. A really nice build. Iain they are from MJT - https://www.dartcastings.co.uk/mjt/3918.php 1 Link to post Share on other sites More sharing options...
RJS1977 Posted July 26, 2020 Share Posted July 26, 2020 On 19/04/2020 at 18:43, scratcher said: Finally finished this, other projects bumped it for a while. The biggest inaccuracy is the continuous running board courtesy of the Hornby Collett donor. Where did the table lamps come from? 1 Link to post Share on other sites More sharing options...
scratcher Posted July 27, 2020 Author Share Posted July 27, 2020 9 hours ago, RJS1977 said: Where did the table lamps come from? Also from MJT https://www.dartcastings.co.uk/mjt/3003.php 1 Link to post Share on other sites More sharing options...
RMweb Premium Neal Ball Posted September 26, 2020 RMweb Premium Share Posted September 26, 2020 On 19/04/2020 at 19:43, scratcher said: Finally finished this, other projects bumped it for a while. The biggest inaccuracy is the continuous running board courtesy of the Hornby Collett donor. Terrific end result 2 1 1 1 Link to post Share on other sites More sharing options...
scratcher Posted February 16, 2021 Author Share Posted February 16, 2021 (edited) Currently working on a D144 restaurant. Again Hornby donor with Bill Bedford sides, but this time I added a 1mm x 3mm length of brass angle to very the top of the sides, which gives a much better join for the roof. The heavy duty bogies are Comet brass units with white metal sides, plus the plastic plate with the brake shoes attached from the Hornby ones. Roof ventilators from Mike Trice, pipework layout gleaned from his very useful drawings. Further inspiration from a Steve Banks article in BRM April 1998, and 'Daves C & W Works' and 'Micks 4mm LNER Models' on The LNER Encyclopedia site. Edited April 3, 2022 by scratcher Re-added pictures 8 3 Link to post Share on other sites More sharing options...
scratcher Posted March 15, 2021 Author Share Posted March 15, 2021 (edited) A bit more progress ... Edited April 3, 2022 by scratcher 6 1 Link to post Share on other sites More sharing options...
scratcher Posted November 21, 2021 Author Share Posted November 21, 2021 (edited) Took rather longer than expected to complete, but pretty much finished now. Experimenting with David Keen close-fitting buckeye couplings. Edited April 3, 2022 by scratcher 6 3 Link to post Share on other sites More sharing options...
scratcher Posted February 4, 2023 Author Share Posted February 4, 2023 I picked up a nicely built and painted D186 open a few years ago, but it had a poor interior. I've replaced it using 3D-printed seats and tables from floyd-kraemar on eBay. Seat and interior colours based on the example preserved at the NYMR. 1 1 Link to post Share on other sites More sharing options...
scratcher Posted December 5, 2023 Author Share Posted December 5, 2023 (edited) It's been a quiet modelling year for me, mainly due to the acquisition of another motorbike, but that should change again as I've recently retired. Over a year ago I bought one of the new Alan Rose / Martin Kirkby 3D printed GCR coach kits, the 60' matchboard brake third. It's finally complete, apart from buffer shanks and heads. It comes with the body, ends and roof pre-assembled, with the chassis pre-assembled, with bogies, and with a nice interior that even has luggage racks. It had a lot of printing lines that were removed as best I could with a fibre glass pen (Alan has since apologised for the lines, apparently mine was not typical). The biggest problem was that it wouldn't go round my 4th radius curves, so I had scrape away some of the chassis beams, quite a fraught operation during which I snapped the chassis in two, but it all worked out in the end. Paint is Precision coach teak over Halfords orange filler primer, applied using Ian Rathbone's technique whereby the teak is thinned and a couple of drops of linseed oil added to make a scumble. Chassis is Halfords matt black, which in reality is more a satin finish. Fox transfers. Handrails and gangway door on the brake end, glazing, corridor handrails and luggage window bars finished it off. Edited December 5, 2023 by scratcher 5 3 Link to post Share on other sites More sharing options...
Forward! Posted December 7, 2023 Share Posted December 7, 2023 (edited) Lovely result. Amazing how far 3d printing has developed in such a short space of time. I've always thought the late GCR matchboard carriages were very elegant in a simple, robust way- a hallmark of GCR's approach to design under Robinson. Back in the day I dreamt of representing the GCR/GWR joint, but opted for just the GWR because of the (non) availability of any rtr GCR stock. To think, since then we've had several mainstream rtr GCR locos, and now plastic carriage kits too! I wonder whether a venture into modelling the joint line is in my future! Will Edited December 7, 2023 by Forward! 1 Link to post Share on other sites More sharing options...
scratcher Posted December 8, 2023 Author Share Posted December 8, 2023 15 hours ago, Forward! said: I wonder whether a venture into modelling the joint line is in my future! Go for it Will 😀. I think what I like best is that I can legitimately model mainline stock from two very different railways. And I don’t think I would have got round to making loco kits if it wasn’t for the GCR side (I have a separate thread for locos). The downside is that you need a lot of stock! I must have a decade’s worth of kits accumulated. But now I’m retired I might actually complete them. Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now