jolt5 Posted February 12, 2018 Share Posted February 12, 2018 Hey guys, I am slightly apprehensive to start this thread but i have currently started trying to build model kits. I am only 17 but have a passion for engineer wagons from the 80's especially the electrification dept. The first kit I've built is this sncf mineral wagon from Parkside Dundas (PS 32) which runs really well but has now become a scrapped wagon which will be placed on a weltrol / lowmac. it is based on this http://www.departmentals.com/photo/041476 I have learnt a lot and it is nowhere near perfect (for a start I'm waiting for decals in the post as i type this) but i am open to scrutiny and constructive criticism and any help anybody can give would kindly be received. My next kit i think shall be a Parkside Dundas medfit (pc 45). thanks Jolt5 8 Link to post Share on other sites More sharing options...
forest2807 Posted February 12, 2018 Share Posted February 12, 2018 Looks really good to me - like something that might be produced by a much more experienced modeller. I think you have got an excellent eye for weathering, keep up the good work, you could be writing books on it in 20 years time! 1 Link to post Share on other sites More sharing options...
gobbler Posted February 12, 2018 Share Posted February 12, 2018 Your weathering is top notch Don't suppose you could do a step by step could you? What couplings do you use? Show us some more please Cheers Scott Link to post Share on other sites More sharing options...
RMweb Premium AdeMoore Posted February 12, 2018 RMweb Premium Share Posted February 12, 2018 That’s a cracking bit of weathering as the above have said. Cheers Ade 1 Link to post Share on other sites More sharing options...
jdb82 Posted February 12, 2018 Share Posted February 12, 2018 Agreed! Really good weathering that we could all learn from :-) Show us how! 1 Link to post Share on other sites More sharing options...
jolt5 Posted February 14, 2018 Author Share Posted February 14, 2018 That’s a cracking bit of weathering as the above have said. Cheers Ade Agreed! Really good weathering that we could all learn from :-) Show us how! Your weathering is top notch Don't suppose you could do a step by step could you? What couplings do you use? Show us some more please Cheers Scot Thanks so much guys... hopefully my decals will come in the post in the next day or two. Meanwhile i've been experimenting on an old 21 ton HTO hopper i've found. I tried 5 different methods but i think i have found one i'm reasonably happy with, i'll post some pictures soon. I don't know when ill be doing such a heavy weathering job again but when i do ill be sure to document how i did it. For now its just pure experimentation. Link to post Share on other sites More sharing options...
jolt5 Posted February 15, 2018 Author Share Posted February 15, 2018 Hey guys, Quick update from today and last night. My experimentation has lead to a unique looking wagon but i am rather happy with the finish on the last couple of pictures. It is by no means perfect and i will need to have some practice but it is coming along quite nicely. I have decided i need a better phone or camera as my picture quality is far from HD . Thanks for having a look. Any ideas on how i can improve please don't be scared to say... i need all the help i can get! Cheers Jolt5 2 Link to post Share on other sites More sharing options...
gobbler Posted February 15, 2018 Share Posted February 15, 2018 The top hopper panels 2&3 look really good and I like the rust bubbles under the paintwork on the lower one. Are you using salt? I know that's a technique I've used on some of my 1/35th tanks keep up the good work Scott 1 Link to post Share on other sites More sharing options...
jolt5 Posted February 16, 2018 Author Share Posted February 16, 2018 hey gobbler, thanks for the kind comment The top hopper panels 2&3 look really good and I like the rust bubbles under the paintwork on the lower one. Are you using salt? I know that's a technique I've used on some of my 1/35th tankskeep up the good workScott In regards to your question I tried a couple of things to achieve this. I have used a acrylic textured rust paint from games workshop for the grit. I then cover the area in two coats of enamel Matt varnish because when i rub the grey paint off with a cotton bud i didn't want the rust paint underneath to come off... although it did a little on the third panel... my bad. If you'd like the paint numbers I can check when i get home if you would like. any ideas on improving are kindly received. Cheers jolt5 Link to post Share on other sites More sharing options...
gobbler Posted March 5, 2018 Share Posted March 5, 2018 Hey Jolt, Been a bit quiet on here, whatcha' been doing. Must have some more of your excellently weathered wagons. Scott Link to post Share on other sites More sharing options...
jolt5 Posted March 26, 2018 Author Share Posted March 26, 2018 (edited) I have been abit quiet... Ive been quietly dying in the corner of Influenza . Apart from Starting work on a grampus nearly 2 weeks ago not much else has happened. To add to my worries i am going to the menin gate with Air cadets this weekend so it might be a while till i get back into it all properly. Edited March 26, 2018 by jolt5 1 Link to post Share on other sites More sharing options...
gobbler Posted March 27, 2018 Share Posted March 27, 2018 I was in 276 SQN Chelmsford. Had a brilliant time there Scott 1 Link to post Share on other sites More sharing options...
jolt5 Posted July 9, 2018 Author Share Posted July 9, 2018 (edited) I can only apologies for my absence, life caught up with me and i had to stop the things i loved the most for exams and the such. Its summer again however which means its time to crack out the paint cans and have another go!!! Taking time away however means i had forgotten what i was doing. A quick trip to the local model store resulted in the purchase of 2 cheap wagons. A Bachmann 37-355A (13 ton steel sand tippler) and A Dapol B23 (3-Plank Open Wagon in grey). A quick look at Paul bartletts website ( http://paulbartlett.zenfolio.com/brmediumwood ) for inspiration and a few hours later and this is the result so far. In my opinion the wood is too bright for my liking and the dirt looks uneven but for my rookie skills i'm quite happy so far. I've also included a picture of the grampus i started many weeks ago but never quite finished. i hope you like them. Edited July 9, 2018 by jolt5 4 Link to post Share on other sites More sharing options...
gobbler Posted July 10, 2018 Share Posted July 10, 2018 Looking good 1 Link to post Share on other sites More sharing options...
jolt5 Posted July 10, 2018 Author Share Posted July 10, 2018 Looking good cheers mate. I'm a little rusty !!! Link to post Share on other sites More sharing options...
jolt5 Posted July 12, 2018 Author Share Posted July 12, 2018 (edited) Went absolutely wild today and bit the bullet! I've never removed decals from a RTR wagon so i bought some T-cut and decided i would have a go. Although the paint was removed i was quite content with the outcome.Next i wanted to replicate the wagon having a few repairs so i found a couple of shades of bauxite and added a few patches. It didn't look brilliant but replicates the look i was looking for i guess. Next i added some decals i had purchased a while back. Crucially they had the correct Wheel base decal and a Tops code suitable for the wagon. This is the first time i've placed decals on a wagon, I have only ever done planes and tanks, therefore a coat of gloss varnish was applied and left to dry. Then the decals followed. (I forgot to take a picture of this). I have currently given the wagon a wash of bauxite to blend the patchwork and a wash of grey/black. The interior has had a dry bush of grey too but this is far from finished. Any ideas on how to improve are very welcome! Also does anyone have any knowledge on how to make custom decals. I have tried but i don't have a clue where to start. Any advice would be well received. Thanks, Jolt5 Edited July 12, 2018 by jolt5 2 Link to post Share on other sites More sharing options...
jdb82 Posted July 13, 2018 Share Posted July 13, 2018 Any ideas on how to improve are very welcome! Also does anyone have any knowledge on how to make custom decals. I have tried but i don't have a clue where to start. Any advice would be well received. Thanks, Jolt5 Somewhere in the depth of my cupboard, I have some inkjet transfer paper that I bought a while ago. Can’t remember where I bought it from - I’m away at the moment, but when I get back in a few days, I’ll have a look because I’m sure it has the sellers details on the envelope it came in. Almost certain it was an eBay purchase. I’ve never used it, so I don’t know what kind of quality they will be, but it might be worth a go. You simply design the decal on your favourite software and print it as though you were printing to standard paper. I’ll message you with any details I find in a few days John Link to post Share on other sites More sharing options...
gobbler Posted July 13, 2018 Share Posted July 13, 2018 After printing the decal on a white or clear transfer sheet you need to spray a clear varnish over the top, not sure if this name is correct but I seem to recall "Johnson's klear" it worked well for a couple of birthday mugs I made for family, they've been washed a couple of times and still look good. It's all down to how fine your printer can print, these days even the cheapest of printers can print to a good definition. For the code boxes you'll need white paper and just print the black. Good luck and post your results. Scott 1 Link to post Share on other sites More sharing options...
jolt5 Posted July 13, 2018 Author Share Posted July 13, 2018 Thank you guys, Somewhere in the depth of my cupboard, I have some inkjet transfer paper that I bought a while ago. Can’t remember where I bought it from - I’m away at the moment, but when I get back in a few days, I’ll have a look because I’m sure it has the sellers details on the envelope it came in. Almost certain it was an eBay purchase. I’ve never used it, so I don’t know what kind of quality they will be, but it might be worth a go. You simply design the decal on your favourite software and print it as though you were printing to standard paper. I’ll message you with any details I find in a few daysJohn After printing the decal on a white or clear transfer sheet you need to spray a clear varnish over the top, not sure if this name is correct but I seem to recall "Johnson's klear" it worked well for a couple of birthday mugs I made for family, they've been washed a couple of times and still look good. It's all down to how fine your printer can print, these days even the cheapest of printers can print to a good definition. For the code boxes you'll need white paper and just print the black.Good luck and post your results.Scott I have had a go in photoshop but it was a rather crude attempt! I posted the question in another part of the forum and a lovely fellow member gave me some good advice. http://www.rmweb.co.uk/community/index.php?/topic/135614-departmental-tops-fonts/&do=findComment&comment=3227284 The name of that decal paper would be very useful but for now i will practice on plain A4 office paper while i work out the Fonts and Templates i need. Link to post Share on other sites More sharing options...
jolt5 Posted July 13, 2018 Author Share Posted July 13, 2018 (edited) Quick update of the finished wagon and its sister. Ive only done one side for now until i can make these decals as i want the single wagon to hold 2 different identities. Cheers, Jolt5 Edited July 13, 2018 by jolt5 4 Link to post Share on other sites More sharing options...
jdb82 Posted July 15, 2018 Share Posted July 15, 2018 I checked where I got my decal paper from - www.mrdecalpaper.co.uk This takes you to their eBay store. Haven't tried it yet, so can't comment on it's effectiveness, particularly with smaller creations. As Globbler says, to a certain extent it'll come down to your printers resolution. 1 Link to post Share on other sites More sharing options...
jolt5 Posted July 24, 2018 Author Share Posted July 24, 2018 Hey guys, another Update! I was recently gifted some rather old (and clean) VEA vans. A quick weathering and a splash of paint and they have come out rather well i think. I have purchased some decals to renumber them (a sad after thought as i should have done that before weathering). We learn from our mistakes however. Here is a sneak preview of my next project too. I bought 3 but one had a molding deformity. Dapols excellent customer service is sending me a replacement part in the post as we speak. Can anyone guess what they are? cheers, Jolt5 3 Link to post Share on other sites More sharing options...
jolt5 Posted August 3, 2018 Author Share Posted August 3, 2018 A little progress has been made on my Dapol 16 ton wagons. Looking at prototype pictures from the usual sources i decided on the way i would attempt this project. I have built one first and ill follow up with the other 3 later. I gave the firtst wagon a base of a dark brown colour. following this I then assembled the wagon. A fairly basic lit compared to the tanks and aircraft i've built in the past but no less enjoyable. From here i then gave it 2 coats of matt varnish and a coat of Humboldt 140 to represent unfitted grey. Once dry i used a scalpel to remove the top coat of grey and leave paint scratches with the rust showing. I followed this with a light dry brushing of yellow and orange to blend the rust colour however i don't know if i like the look this gave. I finished the body with a coat of black wash. I may add another one yet to tone it down once decals have been applied. Finally this is my first conversion project ever. I decided for a low risk modification and that i would change one of the wagons to the re-bodied version (https://paulbartlett.zenfolio.com/brmineralweld) without top doors here is the results so far it needs more work but i only started today. 5 Link to post Share on other sites More sharing options...
jolt5 Posted May 1, 2020 Author Share Posted May 1, 2020 (edited) My return 2 years later... Surprise!! Here's the nearly finished wagons I started some 2 years ago. A recent return to the hobby has spurred me to get them done! I have a few other projects to finish too! Sorry about the wait! Edited May 1, 2020 by jolt5 2 Link to post Share on other sites More sharing options...
jolt5 Posted May 2, 2020 Author Share Posted May 2, 2020 (edited) A final touch up of black and Matt varnish to follow. I'm very happy with how these have turned out. They are to be used on a small scrap train so a load will need to be made eventually. I plan to do some general underframe grime once I've obtained an airbrush but for now that can wait. My next project is to finish those Hornby VEAs I've had on the go for ages. Thank, jolt5 Edited May 2, 2020 by jolt5 2 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now