Blue Max Posted February 22, 2018 Share Posted February 22, 2018 Kemilway have loaded up 14 new LNER etched brass coach kits to their web site in the last day or so. There are 52” and 61”6” types in both 4mm and 7mm scale The list contains some very interesting diagram numbers. No connection other than a satisfied customer of high quality very well designed coach etches. SteveT Link to post Share on other sites More sharing options...
brossard Posted February 22, 2018 Share Posted February 22, 2018 The 7mm instructions can be downloaded. I've been using them to help me detail my Kirk coaches. The kits look awesome but I'm not sure if I have enough days left to do a 7mm one. John Link to post Share on other sites More sharing options...
26power Posted February 22, 2018 Share Posted February 22, 2018 Didn't realise they were still in business! Seems more 7mm products, but also some 4mm. Website is: https://www.kemilway.com/index.html Link to post Share on other sites More sharing options...
HarryP Posted February 23, 2018 Share Posted February 23, 2018 Do please beware before ordering (and paying). I have an outstanding order for a GER Little Sharpie and some GER wagons that have been on order and paid for since 2012. I was told there might be a slight delay( a couple of months) after I'd already waited six months and contacted Pete, but despite repeatedly emailing and calling, I have never had a refund. I do, almost as an anniversary thing, send an email, yearly now, just to enquire as to it's whereabouts, but never get a response. Link to post Share on other sites More sharing options...
brossard Posted February 23, 2018 Share Posted February 23, 2018 (edited) I've ordered a few small things from Kemilway and they duly came in a reasonable amount of time, nothing like a coach kit mind. John Edited February 23, 2018 by brossard Link to post Share on other sites More sharing options...
RMweb Premium polybear Posted February 23, 2018 RMweb Premium Share Posted February 23, 2018 Do please beware before ordering (and paying). I have an outstanding order for a GER Little Sharpie and some GER wagons that have been on order and paid for since 2012. I was told there might be a slight delay( a couple of months) after I'd already waited six months and contacted Pete, but despite repeatedly emailing and calling, I have never had a refund. I do, almost as an anniversary thing, send an email, yearly now, just to enquire as to it's whereabouts, but never get a response. Small Claims court should focus his attention....... Link to post Share on other sites More sharing options...
micklner Posted February 23, 2018 Share Posted February 23, 2018 Do please beware before ordering (and paying). I have an outstanding order for a GER Little Sharpie and some GER wagons that have been on order and paid for since 2012. I was told there might be a slight delay( a couple of months) after I'd already waited six months and contacted Pete, but despite repeatedly emailing and calling, I have never had a refund. I do, almost as an anniversary thing, send an email, yearly now, just to enquire as to it's whereabouts, but never get a response. Not surprised to read this , I bought his TPO kit . Two year later it turned up , it was a very poor etching and was e bayed at once and a 247 version bought much better quality . Personally once was enough for me. 1 Link to post Share on other sites More sharing options...
roythebus Posted February 23, 2018 Share Posted February 23, 2018 Kemilway used to be John Senior and Tony Dyer many years ago, both sadly no longer with us. I still have a half-made Airfix mogul motorising kit that is missing some parts! Who owns it these days? Link to post Share on other sites More sharing options...
RMweb Gold Bucoops Posted February 24, 2018 RMweb Gold Share Posted February 24, 2018 When I queried something, a Pete Dawson replied. He was very helpful but couldn't fully answer my query (i.e what diagram numbers the Peter K 4 wheel GE coaches are). Link to post Share on other sites More sharing options...
Horsetan Posted February 24, 2018 Share Posted February 24, 2018 Kemilway used to be John Senior and Tony Dyer many years ago, both sadly no longer with us. I still have a half-made Airfix mogul motorising kit that is missing some parts! Who owns it these days? Pete Dawson. Link to post Share on other sites More sharing options...
D51 Posted February 24, 2018 Share Posted February 24, 2018 Kemilway used to be John Senior and Tony Dyer many years ago, both sadly no longer with us. I still have a half-made Airfix mogul motorising kit that is missing some parts! Who owns it these days? John Senior, founder of mopok, is still very much with us. He had his 80th birthday last year. Counting out packets of a dozen 12BA bolts and nuts, with two dozen washers, has done him no harm at all! Frank 3 Link to post Share on other sites More sharing options...
HarryP Posted February 27, 2018 Share Posted February 27, 2018 I was very surprised today to receive a response from Peter. Hopefully I may get a resolution. I am a little worried as he said he sent the goods to me early in 2013, yet I have an email from him,10th Dec 2013 which states " I have not been able to complete your order as the etchers seem to have lost the tooling for the GER Sharpie, they now say they have found them and they will arrive, this was important as I have Orders from other customers." Perhaps he was getting me confused with another customer. (Here's hoping). I just want something for my £122 outlay, either goods or a refund. Fingers crossed. Link to post Share on other sites More sharing options...
Horsetan Posted February 28, 2018 Share Posted February 28, 2018 I was very surprised today to receive a response from Peter. .... Maybe he was reading this topic? 1 Link to post Share on other sites More sharing options...
rupertb Posted November 11, 2018 Share Posted November 11, 2018 For those of you still following this thread be aware that the "new" models posted on the Kemilway website are not going to be made available via Peter now - last week he declined to pay for the production tooling for the first batch despite having taken money from several customers. I also know that at time of writing he owes money for development work on the 7mm GN/LBSC Atlantic project. For those of you interested in seeing some of the models and hearing about future development and sales plans I can be found on stand A50 in the demo area at Warley/NEC in a couple of weeks -R Link to post Share on other sites More sharing options...
davelester Posted November 11, 2018 Share Posted November 11, 2018 (edited) For those of you still following this thread be aware that the "new" models posted on the Kemilway website are not going to be made available via Peter now - last week he declined to pay for the production tooling for the first batch despite having taken money from several customers. I also know that at time of writing he owes money for development work on the 7mm GN/LBSC Atlantic project. For those of you interested in seeing some of the models and hearing about future development and sales plans I can be found on stand A50 in the demo area at Warley/NEC in a couple of weeks -R Hi Rupert, Can I ask what other kits I need to complete a 1938 Flying Scotsman? I can order your triplet, the buffet, and probably the full brake. If Kemilway were reliable, they'd do the third, first, composite and brake third. Did anyone ever do the 65'6" luggage composite? Edited November 11, 2018 by davelester Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted January 9, 2019 RMweb Premium Share Posted January 9, 2019 (edited) I'm after an NER full brake in 4mm scale. But from the general drift of this thread it seems it's better not to throw money Kemilway's way as (1) the etches are poor, (2) he's likely to keep the money without supplying anything, and (3) he might not be trading anymore anyway (post#14 above). Or have I misunderstood? Edited January 9, 2019 by Daddyman Link to post Share on other sites More sharing options...
Tim Lewis Posted January 9, 2019 Share Posted January 9, 2019 I'm after an NER full brake in 4mm scale. But from the general drift of this thread it seems it's better not to throw money Kemilway's way as (1) the etches are poor, (2) he's likely to keep the money without supplying anything, and (3) he might not be trading anymore anyway (post#14 above). Or have I misunderstood? I think the "poor etch" referred to above may be a Peter K production rather than a Kemilway one. All the Kemilway etches I've seen are very good, and it's a shame if the kits are not going to be available. From memory I think D&S may do an NER full brake (depending on which one you're after) - Danny Pinnock is allegedly going to re-run some of his 4mm NER kits "sometime" (a list was expected last year but hasn't emerged as yet). You could always phone him - he's always very helpful. Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted January 10, 2019 RMweb Premium Share Posted January 10, 2019 Thanks, Tim - very useful to know. Danny at D&S is indeed planning to do some NER elliptical-roofed stock as his next mini-release. However, there's an illness in the family and the person who packs his kits for him is acting as full-time carer, so when I last spoke to him in November-ish, he didn't know when they'd be out. Link to post Share on other sites More sharing options...
jwealleans Posted January 10, 2019 Share Posted January 10, 2019 Thanks for that David, I wasn't aware of that. WRT Kemilway, I ordered some etches last year, about February IIRC and just as I was contemplating recalling my paypal payment in mid-June, the bundle dropped through the front door. Up to you whether you take a punt, but let me know if you do as I fancy that NER brake as well. 1 Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted January 10, 2019 RMweb Premium Share Posted January 10, 2019 Thanks for that David, I wasn't aware of that. WRT Kemilway, I ordered some etches last year, about February IIRC and just as I was contemplating recalling my paypal payment in mid-June, the bundle dropped through the front door. Up to you whether you take a punt, but let me know if you do as I fancy that NER brake as well. Thanks Jonathan. I was debating with myself whether to make the Danny situation public, but decided to do so as I thought it might calm the slight frustration that might be being felt at the non-appearance of products that were expected in summer. I might drop Kemilway a line and see if they can supply and how soon. I'll let you know. Link to post Share on other sites More sharing options...
Blue Max Posted January 10, 2019 Author Share Posted January 10, 2019 I think the "poor etch" referred to above may be a Peter K production rather than a Kemilway one. All the Kemilway etches I've seen are very good, and it's a shame if the kits are not going to be available. From memory I think D&S may do an NER full brake (depending on which one you're after) - Danny Pinnock is allegedly going to re-run some of his 4mm NER kits "sometime" (a list was expected last year but hasn't emerged as yet). You could always phone him - he's always very helpful.[/quote Danny at D&S does not do the NER bogie full brake that is in the Kemilway range. I got one of these from Kemilway a couple of years back, although it did take about 18 months from the point I ordered and paid for the kit before it arrived. Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted January 12, 2019 RMweb Premium Share Posted January 12, 2019 Thanks for that. I've emailed him about the full brake. If/When I hear from him, and depending on his answer, I'll raise the concerns mentioned on here, and see if he can guarantee no excessive delays and no theft of my money. Will post here if/when I hear. 2 Link to post Share on other sites More sharing options...
Rambler Posted January 13, 2019 Share Posted January 13, 2019 (edited) I'm after an NER full brake in 4mm scale. But from the general drift of this thread it seems it's better not to throw money Kemilway's way as (1) the etches are poor, (2) he's likely to keep the money without supplying anything, and (3) he might not be trading anymore anyway (post#14 above). Or have I misunderstood? The kit that Kemilway list as a 52’ NER Full Brake is a 51’ LNER design, built from 1928. There is a drawing on page 79 of “Historic Carriage Drawings in 4mm Scale” ( the original book by Jenkinson & Campling). More details, and a photo, are in “Gresley’s Coaches” by M Harris. The NER was not keen on bogie full brakes, but built lots of 6 wheelers. If an early LNER bogie full brake is what you want then Comet do a Diagram 67. Edited January 13, 2019 by Rambler Link to post Share on other sites More sharing options...
UpDistant Posted January 14, 2019 Share Posted January 14, 2019 The kit that Kemilway list as a 52’ NER Full Brake is a 51’ LNER design, built from 1928. If an early LNER bogie full brake is what you want then Comet do a Diagram 67. You have beaten me to it with your reply. The Kemilway kit is indeed an LNER design, Dia 67 (turnbuckle u/f, Fox bogies, no ducket), Dia 129 (early - turnbuckle u/f, Fox bogies, ducket; late - truss u/f, Gresley bogies, ducket), Dia 284 (as late Dia 129). Alternative kits or sides available from Comet, Bill Bedford, Kirk. Regarding ex-NER NPCCS, Dan Pinnock had a few listed previously mostly the six wheelers NE171 (DS174), NE185 (DS185), NE215 (DS180), but also "listed" were bogie NE159 (DS241) which was a BG with bow ends and domed roof ends, and NE169 (DS199) Newspaper Van (elliptical roof). If you are after some NPCCS oddities for the late LNER / early BR period then Diagram NE261 to NE267 might be a good challenge. All started their lives as Brake Composites (some with lavatories) and were converted to Ambulance coaches, then to non-gangwayed Brake Vans around 1944. All had clerestory roofs apart from NE266 (arc roof), and most were 52'0" over headstocks except NE263 (45'0") and NE266 (49'0"). As usual with this type of conversion, two extra sets of double doors were inserted into the sides and any remaining single doors sealed shut. Having said that, sourcing a suitable donor vehicle might be a bit of a problem! Link to post Share on other sites More sharing options...
RMweb Premium Daddyman Posted January 29, 2019 RMweb Premium Share Posted January 29, 2019 No answer to my email. Probably says it all ... Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now