Jump to content
 

Comet Stanier Coaches


farren
 Share

Recommended Posts

  • RMweb Gold

Well the hinges 2 small 1 large per door very small but not as bad as I thought it was going to be.  now fitted to 3 of the striped coaches and alarm gear also fitted to.  so slowly bringing them up to a better detail state. 
 

like to thank Iain for his advice and time taken in helping me. 

 

 

8D309196-2273-4E2C-A502-08F6D6C8950A.jpeg

1598164D-15E6-4941-AD29-79AC57A0C1D8.jpeg

Edited by farren
  • Like 4
Link to post
Share on other sites

  • 2 weeks later...
  • RMweb Gold

First go with HMRS lining And already much better than I managed with fox lining which went in the bin.  Ok it’s a bit wavy but quite good at 3 ft so I’m happy with it and I can only get better... hopefully. 

9BB47E63-566E-459E-935D-1F13D2F8AB37.jpeg

0E34C95D-9324-4D7A-9390-94A4968289D4.jpeg

  • Like 12
Link to post
Share on other sites

  • RMweb Premium

make sure you varnish over them when you are happy with the lining.  I had a strange experience with some ages ago.. now back to using a pen and paint to do them.

 

BUT these coaches look great Farren! Congratulations!

Baz

  • Agree 1
Link to post
Share on other sites

  • RMweb Gold

Thank you Barry O, I had some Matt varnish used on the PI CK but I’m not happy with it up close it’s a bit spotty, so silk varnish from Rail match ordered. 
 

The 2nd side of lining  done on three and the second CK stripped so hinges and alarm gear can be fitted. 
 

waiting for 3 coach kits from wizard but their chassis for the stoves R has turn up. As the Dapol model is awful at staying on the track. 
 

oh and door vents now cut and painted ready to be glued on one as already been done, for anyone thinking I’d forgotten about them

1A0C38D4-6B93-4882-AA6F-417A07D41DFA.jpeg

Edited by farren
  • Like 4
Link to post
Share on other sites

  • RMweb Gold

Well a fresh kit so, so I could put into practice what Iain showed me me. A BTK  Diagram 1851. Door handles will be fitted after its painted. The frames standard Comet with Bachman bogies.

 

I seem to be collecting a stash of comet bogies minus the fitting but and bolt. 

0F8560AC-6FD0-434D-AFC2-FF156442B2C5.jpeg

83305B63-7E12-4B0B-AA44-5EE439957B2E.jpeg

811453C0-3F46-4A9E-83D8-2A31AEE138C5.jpeg

94951AF2-EDC7-485C-810C-07B888837E57.jpeg

Edited by farren
  • Like 5
Link to post
Share on other sites

  • RMweb Gold

Finished the BTK just needs windows fitting and a spray of varnish when it arrives. Oh and door handles. Started a BCK a Diagram 1720A a Stanier rebuild. 
 


 

 

a couple of photos 

 

E71E3C0B-E5BF-440B-9F6A-1A0D8B63BC86.jpeg

23B820A7-5608-4A7F-8C6E-ACCB79EA545F.jpeg

Edited by farren
  • Like 2
Link to post
Share on other sites

  • 3 weeks later...
  • RMweb Gold

The BCK 1720a nearly finished transfers all added and silk topcoat applied just needs its windows and door handles fitting along with the BTK. No LMS crest for theBCK model as the image of the prototype shows that 6767 didn’t have one.

57B139D7-D9FB-476C-8355-66B4E10C57C3.jpeg

Edited by farren
  • Like 5
  • Craftsmanship/clever 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...