Jump to content
 

Corfe Exchange completed


Locoles
 Share

Recommended Posts

   Here is my completed entry for the cakebox challenge in 7mm scale. Progress has been rather slow from October! The thumbnails show the process from the basic plan which has had to be adapted in a couple of areas but still keeping within the challenge footprint. The loading dock needed to be raised in height to attain a reasonable angle to enable discharge from the tippler to the standard gauge wagon and the backscene and tree were replaced from the original.The replacement tree is a representation of a Magnolia, a couple of sprigs of Jasmine spliced together and painted white & red.

    I wanted to create an impression of activity within the scene so several cameos were created. Firstly lighting. Inside the hut is an LED giving off a red glow and outside a brazier also lit by a LED. These are powered by a 9v battery contained in an extractable compartment which together with its switch lives under the loading dock. A workman having a break from repairing the well worn fence is seen having a brew. His flask keeping his cuppa hot as steam can be seen rising from his mug. He is keeping an eye on the broken pieces of fence burning in the brazier and he is also having to keep an eye on the water spillage from the hosepipe used to fill the loco. At the other end of the hut is a tally board and a spare rope. The main focus is the loading shute formed from plasticard channel with track pins as bolts, (I knew I would find a use for those old bent pins!), matchsticks and for the shute itself a section of aluminium food tray coloured and distressed. The sand and gravel was sourced from our local beach and again wanting to give the impression of movement, a load is being discharged.

    Sometimes less is more, and without the wagons and loco more detail can be seen such as weeds growing around the track and in the wall and also the sand spillage. Finally the Dorset Sand & Gravel company (DSG) must be doing fine as they have invested in a brand new diesel! Altogether a totally enjoyable project.

post-32871-0-05708800-1526237094_thumb.jpg

post-32871-0-15444900-1526237581_thumb.jpg

post-32871-0-03211300-1526237666_thumb.jpg

post-32871-0-10713400-1526237751_thumb.jpg

post-32871-0-46152700-1526237891_thumb.jpg

post-32871-0-49251700-1526237970_thumb.jpg

post-32871-0-85600500-1526238107_thumb.jpg

post-32871-0-23004200-1526238194_thumb.jpg

post-32871-0-30303500-1526238284_thumb.jpg

post-32871-0-27230100-1526238363_thumb.jpg

post-32871-0-51928000-1526238438_thumb.jpg

post-32871-0-65580400-1526238661_thumb.jpg

post-32871-0-55760400-1526238740_thumb.jpg

post-32871-0-26660000-1526238816_thumb.jpg

post-32871-0-62042100-1526238895_thumb.jpg

post-32871-0-48645800-1526239009_thumb.jpg

post-32871-0-49556500-1526239093_thumb.jpg

post-32871-0-95257700-1526239184_thumb.jpg

post-32871-0-45877900-1526239287_thumb.jpg

post-32871-0-19582800-1526239368_thumb.jpg

post-32871-0-48650500-1526239458_thumb.jpg

post-32871-0-65814700-1526239540_thumb.jpg

post-32871-0-75219400-1526239635_thumb.jpg

post-32871-0-01422200-1526239723_thumb.jpg

post-32871-0-71419200-1526239807_thumb.jpg

post-32871-0-64591900-1526239896_thumb.jpg

post-32871-0-95974800-1526240059_thumb.jpg

  • Like 5
Link to post
Share on other sites

Thank you all. for your kind comments. Wasn't too sure if the pouring sand would look convincing enough, but I am pleased with the result. Good old diluted PVA and a bit of patience! As the diorama dimensions are minimal in 0 gauge, having the narrow gauge feeder gives more space for detailing etc.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...