w124bob Posted March 7, 2021 Share Posted March 7, 2021 (edited) I've looked closely at the Olivias pictures, many do certainly appear to have badly fitting glazing . Hopefully as long as the glue is not industrial strength that can be rectified. The tail light askew issue, I noticed in one picture what looked like excess paint/flash partially covering the lens again not difficult to fix and this would give the impression of a squint. I had noticed the green FYE comes with the circular exhaust, TMC 25102 has the later letter box over the engine room. Again not a deal breaker for me as I have found several pre TOPS FYE with the original style and even a few blue examples. 25252 is on it's way and 5 others are awaiting personal collection. Edited March 7, 2021 by w124bob spelling 2 Link to post Share on other sites More sharing options...
Fredo Posted March 7, 2021 Share Posted March 7, 2021 Hi, I have found a photo of D7647 on a freight service in 1968 and the boiler grill on the body side has been plated over. When the model is released will a plate be available to reflect this as it may have been carried from new. Thanks Fred Link to post Share on other sites More sharing options...
The Ghost of IKB Posted March 7, 2021 Share Posted March 7, 2021 5 minutes ago, Fredo said: Hi, I have found a photo of D7647 on a freight service in 1968 and the boiler grill on the body side has been plated over. When the model is released will a plate be available to reflect this as it may have been carried from new. Thanks Fred Try reading back a few posts. As has been said many times before, the blanking plates are in the accessory bag. 1 1 Link to post Share on other sites More sharing options...
Fredo Posted March 7, 2021 Share Posted March 7, 2021 Thanks Link to post Share on other sites More sharing options...
Popular Post 61661 Posted March 8, 2021 Popular Post Share Posted March 8, 2021 15 hours ago, Fredo said: Hi, I have found a photo of D7647 on a freight service in 1968 and the boiler grill on the body side has been plated over. When the model is released will a plate be available to reflect this as it may have been carried from new. Thanks Fred Good Morning, Reading through the thread, I've seen a couple of posts asking about grille/step plates. To confirm, ALL models are supplied with a set of very fine etched footstep cover plates (x6) and boiler grille cover plates (x2) painted in the appropriate colours. These allow you to configure your model to suit your period and livery, but also to model other locos with alternative arrangements if you wish. From the start of the project we were aware that there were numerous differences across the class in the presence (or otherwise) of these retro-fitted parts, so we felt that this was the most flexible and appropriate way to supply them. Hope this helps Ben 24 Link to post Share on other sites More sharing options...
gridwatcher Posted March 8, 2021 Share Posted March 8, 2021 OK here goes. I have a 102 in 1977 green here and the general report is very good indeed. Some lovely finesse about the bogies/roof and fan grille etc etc. Of the 'reported issues' I have had to slightly ream out one hole in the balance beam on bogie nothing that a minute's work won't sort. Running quality is first class and hooray there is plenty of room for some serious sound installation. Certainly if the fancy took you 2 speakers of the 40x20x10 scale would fit easily. The jury will remain out until SLW loco appears (in late 2021?) but this is a huge step forward from what we had before and looks right. Drivers now fitted, speakers all at the ready and just waiting on sound chip delivery. Thanks Ben and Heljan and on this evidence I would say the 86, Peak and Duff would make a lot of you happy. 10 4 4 Link to post Share on other sites More sharing options...
RMweb Gold Ian Hargrave Posted March 8, 2021 RMweb Gold Share Posted March 8, 2021 Both Hattons and Rails have images on their respective websites now. Rails images I always find particularly good and revealing.Hattons include both weathered examples which appear to exhibit none of the extremes seen on Olivia’s examples but I’m not to keen on their washed out presentation in any case.Rails have the weathered examples showing as on order. Now easier to make better informed judgements. 1 Link to post Share on other sites More sharing options...
The Ghost of IKB Posted March 8, 2021 Share Posted March 8, 2021 (edited) 2 hours ago, Ian Hargrave said: Both Hattons and Rails have images on their respective websites now. Rails images I always find particularly good and revealing.Hattons include both weathered examples which appear to exhibit none of the extremes seen on Olivia’s examples but I’m not to keen on their washed out presentation in any case.Rails have the weathered examples showing as on order. Now easier to make better informed judgements. Agreed that they do look better, and the headcodes look put together properly and the green weathered one is more acceptable. The blue weathered one still looks like its been driven across a muddy field, still poor on the cabs imo. Glazing still looks recessed, but marker lights look less boggle eyed. https://www.hattons.co.uk/384101/heljan_2536_class_25_3_25155_in_br_blue_with_single_central_double_arrows_and_headcode_blind/stockdetail.aspx Better than the one on olivias site though, thats for sure. The hattons photos are, i think slightly over exposed, which makes them look washed out, it also reduces the contrast between the brown weathering and the yellow front. Lessen the exposure by a stop and i think the weathering would stand out more. Edited March 8, 2021 by The Ghost of IKB Link to post Share on other sites More sharing options...
GordonC Posted March 8, 2021 Share Posted March 8, 2021 I realise weathering is very subjective, but I just dont think I've seen any factory applied weathering from Heljan that looks remotely good. We've had the lazy jet-wash of single-tone brown over the bottom centimetre or two of the bodyside, there is marginally more effort applied here. At least Heljan dont charge extra for the weathering unlike Bachmann, but I'd much rather they didn't bother weathering until they can come up with something better than this Link to post Share on other sites More sharing options...
The Ghost of IKB Posted March 8, 2021 Share Posted March 8, 2021 Weathered versions are more expensive around 160 vs 150 at the box shifters. Link to post Share on other sites More sharing options...
RMweb Gold Roy Langridge Posted March 9, 2021 RMweb Gold Share Posted March 9, 2021 6 hours ago, The Ghost of IKB said: Weathered versions are more expensive around 160 vs 150 at the box shifters. Yes, which is the £10 more on RRP that Heljan do charge for “weathering”. Roy 1 Link to post Share on other sites More sharing options...
robertcwp Posted March 9, 2021 Share Posted March 9, 2021 9 hours ago, GordonC said: I realise weathering is very subjective, but I just dont think I've seen any factory applied weathering from Heljan that looks remotely good. We've had the lazy jet-wash of single-tone brown over the bottom centimetre or two of the bodyside, there is marginally more effort applied here. At least Heljan dont charge extra for the weathering unlike Bachmann, but I'd much rather they didn't bother weathering until they can come up with something better than this Factory applied weathering is rarely any good from any manufacturer. I try to steer clear of weathered locos and carriages. Bachmann's weathered units and Mark 1s are terrible so Heljan are not alone in this respect. I did not order any weathered 25s. 4 5 Link to post Share on other sites More sharing options...
RMweb Premium brushman47544 Posted March 9, 2021 RMweb Premium Share Posted March 9, 2021 17 hours ago, Ian Hargrave said: Both Hattons and Rails have images on their respective websites now. Rails images I always find particularly good and revealing.Hattons include both weathered examples which appear to exhibit none of the extremes seen on Olivia’s examples but I’m not to keen on their washed out presentation in any case.Rails have the weathered examples showing as on order. Now easier to make better informed judgements. Personally, my go to website now for photos is Kernow MRC. In most cases, includes these 25s, Kernow includes a photo of the model on one of its layouts (I think in the Guildford shop) taken by Chris Nevard. Although there is no guarantee the lighting is exactly the same, you can look at the photos of other models and compare the scenic background. This doesn't change so you can use that to help compare colours based on the level of lighting. You can't make such a comparison with either Hattons or Rails because they use a white background that doesn't change with the amount of light. 1 5 Link to post Share on other sites More sharing options...
w124bob Posted March 9, 2021 Share Posted March 9, 2021 I have a couple of questions, relating to how it's assembled , do they i have detachable buffer beams 26/27 style and similar with the side frames. Just makes weathering and attaching the buffer beam pipe detail easier. Link to post Share on other sites More sharing options...
37501 Posted March 9, 2021 Share Posted March 9, 2021 43 minutes ago, Richard Croft said: Mine came today, I'm very pleased with it. Its particularly good for sound fitting with plenty of space at each end. Richard Looks and sounds great Richard and an easy looking sound installation. Thank you for your video which is very informative. I have ordered blue 25093. I like Heljan locos as I find they have a good blend of detail and robustness. John 3 Link to post Share on other sites More sharing options...
Kirby Uncoupler Posted March 9, 2021 Share Posted March 9, 2021 To give some balance to my earlier post, where I criticised the fit of the cab windows, I have to say the rest of the model, or should I say the overall model, is very good. After chewing my knuckles over the glazing, and going into denial, I needed a Type 2 junkie fix, so I bit my tongue, and ordered a Heljan 2532 GFY version, putting my wad where my gob is. Now that I can see it in the flesh, it is a very impressive creation, a much better shape than the various Bachmann issues (the Bachmann shape looks like the shape in the IA loco drawing book by R.S.Carter), it runs well, lights and working headcodes look good, and are correctly fitted, the livery is well executed, and there are bags containing accessory goodies, clearly a lot of thought has gone into this product, BUT I still say the cab glazing could have been a tad flusher (we know the front windows had inset rims), and the top corners at one end of mine, weren't fully in position (as spotted in some photos). Maybe i'm just an old fussy-drawers, i'll have a go at re-fitting my windscreens, on a wet afternoon, maybe it needs splitting up, like on earlier Heljan models, like the Class 33? I haven't weighed it exactly, but it's slighter lighter than the Bachmann, perhaps managing 11 coaches for the Bachmann's nominal 12, but no big deal, just double-head! The studio images suggest a very light grey roof on the GFY, but the colour has been bleached by the fierce lighting, in the flesh the roof is a milder medium-grey. I can answer W124's recent question, yes the buffer beam unit is attached with two screws, it's a very neat arrangement. It goes without saying, that models submitted for review are probably cherry-picked, rather than the first that comes to hand, so there maybe others around, with less than perfectly fitted windows? If you want me to give an overall personal score for this model, i'd say 95/100, five points off for the not totally flush glazing, but i'm happy to buy more Heljans now. I won't need to rely totally on the forthcoming SLW late 25, I will have a mix of Heljan and SLW, after all, these are cheaper! Cheers, Brian. 9 1 Link to post Share on other sites More sharing options...
47164 Posted March 9, 2021 Share Posted March 9, 2021 Does look a good step up from the Bachmann offering , and as we all agree weathering is very subjective and in this instance almost looks dry brushed as opposed to an airbrush. Link to post Share on other sites More sharing options...
aureol40012 Posted March 9, 2021 Share Posted March 9, 2021 1 hour ago, Richard Croft said: Mine came today, I'm very pleased with it. Its particularly good for sound fitting with plenty of space at each end. Richard Richard, this is my current stock of your products! What combo would you recommend for the 25? Link to post Share on other sites More sharing options...
robertcwp Posted March 9, 2021 Share Posted March 9, 2021 (edited) I took delivery of my six today. I think they look very good. However, there was slight damage to some of them. Chipped paint on one or two lamp brackets. Very strangely a missing overhead warning flash - possibly not printed on to begin with - there was a blank bit on the end rather than just yellow paint where it should have been. EDIT: the missing warning flash is correct for the loco modelled. One bogie step fallen off. All of these are easily dealt with and no need to return the models. Three of the six had headcodes that were pushed in or not straight at one or both ends, in one case this was pretty extreme. I fixed it easily so again no need to return the model. I haven't done the others yet but it should not be a problem. I wonder if this issue is caused by the packaging, eg if it's closed up without the model being centred in the plastic tray. i also wonder how easy it will be to change the headcodes as 1O00 on D7667 was only set in its boxes for the official photos and is not typical of headcodes carried. All six ran smoothly on my test track although one was a bit noisier than the others. Testing them on the layout will have to wait until the weekend. I'm not sure that D7647 should have air brake pipes in GSYP livery. Not sure about the other pre-TOPS ones - i shall have to check - some were built with air brakes. Doubtless the SLW one will have the edge in various respects but will also be more expensive. I suspect I shall end up with a mixed fleet. Edited March 13, 2021 by robertcwp Correction. 1 1 2 Link to post Share on other sites More sharing options...
aureol40012 Posted March 9, 2021 Share Posted March 9, 2021 1 hour ago, robertcwp said: I took delivery of my six today. I think they look very good. However, there was slight damage to some of them. Chipped paint on one or two lamp brackets. Very strangely a missing overhead warning flash - possibly not printed on to begin with - there was a blank bit on the end rather than just yellow paint where it should have been. One bogie step fallen off. All of these are easily dealt with and no need to return the models. Three of the six had headcodes that were pushed in or not straight at one or both ends, in one case this was pretty extreme. I fixed it easily so again no need to return the model. I haven't done the others yet but it should not be a problem. I wonder if this issue is caused by the packaging, eg if it's closed up without the model being centred in the plastic tray. i also wonder how easy it will be to change the headcodes as 1O00 on D7667 was only set in its boxes for the official photos and is not typical of headcodes carried. All six ran smoothly on my test track although one was a bit noisier than the others. Testing them on the layout will have to wait until the weekend. I'm not sure that D7647 should have air brake pipes in GSYP livery. Not sure about the other pre-TOPS ones - i shall have to check - some were built with air brakes. Doubtless the SLW one will have the edge in various respects but will also be more expensive. I suspect I shall end up with a mixed fleet. At last, a sensible unbiased and practical post on these 25s! We have people who claim that they would be sending these back for not even looking like class 25s, so god knows how they would cope with the minor issues you encountered! Good man for not turning these in to another “the world is ending” type post. 4 4 Link to post Share on other sites More sharing options...
Kirby Uncoupler Posted March 10, 2021 Share Posted March 10, 2021 13 hours ago, aureol40012 said: At last, a sensible unbiased and practical post on these 25s! We have people who claim that they would be sending these back for not even looking like class 25s, so god knows how they would cope with the minor issues you encountered! Good man for not turning these in to another “the world is ending” type post. I don't know of anyone on this thread sending a Heljan 25 back yet, they've only been out a week or less? We've all been busy making-do and mending, whilst calmly discussing the various pros and cons, and reserving our right to change our minds. Would you buy a new car with a badly fitted windscreen? (It's okay Mr. New Car Dealer, i'll refit the windscreen myself, when I get home ) Cheers, Brian. P.S. Can we buy new cars weathered yet? 1 Link to post Share on other sites More sharing options...
Porcy Mane Posted March 10, 2021 Share Posted March 10, 2021 The white pipes on the bogies. Are they printed on? Link to post Share on other sites More sharing options...
61661 Posted March 10, 2021 Share Posted March 10, 2021 3 minutes ago, Porcy Mane said: The white pipes on the bogies. Are they printed on? Raised moulded detail, picked out with white printing on some models, but not all. 1 Link to post Share on other sites More sharing options...
Popular Post 61661 Posted March 10, 2021 Popular Post Share Posted March 10, 2021 Dear All, Thanks for the posts on various topics related to the new Class 25s. A quick update to bring everyone up to date on the current situation. It's pleasing to read that they are finding good homes and generating positive reactions. We were confident that once people saw them up close they would be well received. It can feel like the 'end of the world' when a new product is delivered and the first reports we get are of problems. However, we're getting a better picture of the real situation now. Despite the issues with some of the weathered models (more below), the demand from retailers for all versions has been exceptionally strong since they were released last week. We are seeing repeat orders for large quantities and most versions are now sold out at the warehouse, with small numbers remaining of a few versions for the moment. They may all be sold out in the next couple days at the current rate of progress. Plans for the second run are now being finalised. That said, we cannot overlook the issues raised over the last few days. There has been a 'robust' exchange with our supplier and it's been made clear that they must up their game on quality control. As we all know, QC issues can and do happen with any run of mass produced models, but in this case there are more problems than we are comfortable with. As for the weathering, fortunately not all are as bad as that in the Olivia's photos that first raised the alarm. But again, it's not good enough and has taken the edge off what is an otherwise exciting new release. Interestingly, we've taken a large number of re-orders for weathered models since the issue was raised, so clearly retailers are selling them through quickly - which suggests that the situation is not as bad as first feared. If you do receive a Class 25 that is not up to the standard you expect, please return it to your retailer for exchange or a refund. Finally, to respond to one earlier post regarding review samples - the samples we send out to magazines are usually despatched at the same time as the retailer deliveries and are not 'cherry picked'. I can't speak for other manufacturers now, but when I was working on Model Rail and BRM the review models we received were almost always undisturbed in their packaging, suggesting that they had not been pre-checked. Hope this Helps. Thanks for all your feedback. Ben 18 3 4 1 4 Link to post Share on other sites More sharing options...
dagrizz Posted March 10, 2021 Share Posted March 10, 2021 Thanks for the honest and straight-forward update Ben. Graham 1 4 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now