MrWolf Posted August 5, 2020 Share Posted August 5, 2020 I use number 9 shot which is one of the smallest at 2.29mm diameter. (See my pictures of the Cambrian GWR crane for scale) It's basically clay pigeon shot. Mine was given to me, but I will have a look and see if it can be had cheaper than the model suppliers 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 5, 2020 Author RMweb Gold Share Posted August 5, 2020 8 minutes ago, MrWolf said: I use number 9 shot which is one of the smallest at 2.29mm diameter. (See my pictures of the Cambrian GWR crane for scale) It's basically clay pigeon shot. Mine was given to me, but I will have a look and see if it can be had cheaper than the model suppliers I've got some lead flashing, I could always cut that into pieces maybe........I will cross that bridge when I come to it 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 5, 2020 Share Posted August 5, 2020 Have to rethink that. I can buy armoury shot because I have a licence. Yet there are plenty of other kinds of "shot" out there which would be just as deadly in the wrong hands that are freely available. Probably best asking the seller for diameter?! 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 5, 2020 Author RMweb Gold Share Posted August 5, 2020 Looking at it I wish I’d done the additional strengthening in the form of the the Union Jack Maybe I should do that if there’s enough interest for me make it publicly available on shapways 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 5, 2020 Share Posted August 5, 2020 I certainly think that there would be a good number of people interested in the wagon. I would be, although at shapeway prices I will probably have to sell one of the bikes. Then we could relive another classic children's story: "What? You swapped our cow for a handful of magic beans? You dumb f###!!"... Same result, chased round the garden by a slightly unhinged girl armed with a sword... Link to post Share on other sites More sharing options...
AlfaZagato Posted August 6, 2020 Share Posted August 6, 2020 3 hours ago, MrWolf said: I certainly think that there would be a good number of people interested in the wagon. I would be, although at shapeway prices I will probably have to sell one of the bikes. Then we could relive another classic children's story: "What? You swapped our cow for a handful of magic beans? You dumb f###!!"... Same result, chased round the garden by a slightly unhinged girl armed with a sword... This seems appropriate here. Also, yes, some Chicagoans do actually sound like this. 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 6, 2020 Share Posted August 6, 2020 Only been to Chicago once, got stuck at O'Hare in bad weather on the way back from San Antonio. I didn't even get to hear much of the local accent either, but I did get to find out how upbeat and philosophical the good people of Kentucky can be when obliged to spend a night on an airport floor. Must have been a hundred or so of them stranded. It didn't seem to bother them one bit. Link to post Share on other sites More sharing options...
AlfaZagato Posted August 6, 2020 Share Posted August 6, 2020 Honestly? Any part of Chicago outside the airport is bad roads and high taxes, though nothing on VAT. If you bounce through O'Hare, grab a slice of deep-dish or a Chicago-style hot dog and call it good. Unless you really want to see rotting 'L' trestles. 1 Link to post Share on other sites More sharing options...
MrWolf Posted August 6, 2020 Share Posted August 6, 2020 Never left the metropolis that is O'Hare, I was hoping that the weather would clear and I could get a red-eye to Washington. When I was working in Missouri I had chance to look around the railways in St. Louis, some impressive bridges and stuff in the city and of course I had a regular view of the daily traffic on the lines in and out of GM's Wentzville assembly plant. Something that you don't see in the UK anymore is freight trains just rumbling across the town streets. Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted August 6, 2020 RMweb Gold Share Posted August 6, 2020 Gents, please take your travelogue somewhere else, this isn't the place for it. Al. 1 Link to post Share on other sites More sharing options...
MrWolf Posted August 6, 2020 Share Posted August 6, 2020 Here we are, a group of strangers with a common interest in model railways and as we bounce comments back and forth, we find out that those of us who have lived a little have a lot of common ground. It's often referred to as "The six degrees of separation", an interesting but non railway subject, look it up. I for one suffer from Complex PTSD as a result of some of the life experiences in the world's less desirable tourist destinations as well as showing a good number of Asperger's syndrome traits, so unfortunately I do tend to drift at times. I wasn't the least bit put out about you taking us all off on a Grimm's fairy tale trip on Tuesday, in fact everyone, including the topic originator got a good laugh out of it. As a very small child I got all self conscious about my name, but about 40 years ago, I realised what a great icebreaker it is. I happen to take a great interest in what Chuffinghell is creating here, I learn something interesting, useful or funny almost daily. If I have irritated him in some way, then he has my sincere apologies. Anybody else perhaps just needs to take themselves a little less seriously and remember that we are a minority and there's a whole world out there. Peace Out. 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Popular Post chuffinghell Posted August 7, 2020 Author RMweb Gold Popular Post Share Posted August 7, 2020 The reprint of my Loriot L arrived this afternoon, it’s been cleaned and given a quick coat of filler primer as I find the yellow helps to highlight areas that need addressing The central post idea appears to have worked quite nicely I think I may have gone overboard with details you can hardly see though Not a bad starter for ten 5 17 Link to post Share on other sites More sharing options...
Andrew P Posted August 7, 2020 Share Posted August 7, 2020 QUOTE = Not bad!!!!!! hahahha, bloominnnnnnn brilliant Chris, first Class, with Honours my friend. 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted August 7, 2020 RMweb Gold Share Posted August 7, 2020 20 minutes ago, chuffinghell said: I think I may have gone overboard with details you can hardly see though Er, no? Even if they are barely seen, it's the impression they give which lifts the model, and once painted and weathered to your usual standard, they will show. Al. 3 1 Link to post Share on other sites More sharing options...
MrWolf Posted August 7, 2020 Share Posted August 7, 2020 7 minutes ago, Alister_G said: Er, no? Even if they are barely seen, it's the impression they give which lifts the model, and once painted and weathered to your usual standard, they will show. Al. Got to agree with that. It's easy to say: "Does it matter? You can hardly see it" but a good part of the challenge of making a superior model is to include, or somehow suggest what you KNOW is there. Because the paint WILL show up the details. Better to do it now than look at it later and think - I need to make a Mk2. Of course, in this case, you are going to be working on several prototypes, but now is the time to do it. 2 2 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 7, 2020 Author RMweb Gold Share Posted August 7, 2020 (edited) As well as my 3D print my transfers arrived from HMRS today I'm not a fan of pressfix (I prefer waterslides) but only the HMRS do the ‘PT WAY BRAKE’ The tonnage transfer is Modelmasters and because I’m lazy I’m having the running number printed as one transfer from Railtec as well as ‘WARREN’ It’s not 100% accurate as I think the ‘PT WAY BRAKE’ should go level with the G & W but when I laid it out on the computer it looked better as I’ve done it (I’ll keep telling myself that till I’m convinced ) I also had conflicting information on the tonnage 14 or 16....but I only had 14Tons anyway so the decision was made for me Just got to do the other side now Additional - I’m not bothering with ‘CONSTRUCTION’ because the transfer from HMRS is too long to fit between the angle irons Edited August 7, 2020 by chuffinghell 12 Link to post Share on other sites More sharing options...
RMweb Gold Alister_G Posted August 7, 2020 RMweb Gold Share Posted August 7, 2020 (edited) 11 minutes ago, chuffinghell said: It’s not 100% accurate as I think the ‘PT WAY BRAKE’ should go level with the G & W but when I laid it out on the computer it looked better as I’ve done it (I’ll keep telling myself that till I’m convinced ) I've just done a quick gurgle, and can't find any prototype photos, only other models, but the consensus seems to be the smaller lettering is laid out lower than the tops of the G and W, just as you have it. It certainly looks right to me, but then I'm not a follower of the Greasy, Wet and Rusty anyway... Al. Edited August 7, 2020 by Alister_G 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 7, 2020 Author RMweb Gold Share Posted August 7, 2020 (edited) 13 minutes ago, Alister_G said: ....and can't find any prototype photos.... Me neither 13 minutes ago, Alister_G said: .....only other models Same 13 minutes ago, Alister_G said: .....but then I'm not a follower of the Greasy, Wet and Rusty anyway... Al. I’ve gone for Great Western(ish) Railway I do sometimes wonder if later BR would have been easier I’m sure I’ll get hung drawn an quartered once it’s finished and I post a photo on the Oxford Rail Toad thread....at least it hasn’t got bungalow style windows anyone Edited August 7, 2020 by chuffinghell 3 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 7, 2020 Author RMweb Gold Share Posted August 7, 2020 41 minutes ago, MrWolf said: ....Better to do it now than look at it later and think - I need to make a Mk2 That’s very true 42 minutes ago, MrWolf said: ....Of course, in this case, you are going to be working on several prototypes, but now is the time to do it. I’m currently drawing up a Loriot M and also considering a Tool Van I’m actually enjoying drawing them up in my ‘limited’ free time which is strange because I do drawings for a living and I don’t like doing drawings at work 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 7, 2020 Share Posted August 7, 2020 That's probably a case of cobbler's boots. When I was in engineering I had a spell of not liking doing more of it in my spare time at work. But I then decided that I would rate the quality of my days by what I had got done for myself. That soon sorted things out! 3 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 7, 2020 Author RMweb Gold Share Posted August 7, 2020 (edited) Both sides now done as far as I can until more transfers arrive Who’s stupid idea was it to do a OO gauge Permanent Way Brake Edited August 7, 2020 by chuffinghell 9 4 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 7, 2020 Share Posted August 7, 2020 (Best Scooby Doo voice) "I dunno..." Looks good though! 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted August 7, 2020 Author RMweb Gold Share Posted August 7, 2020 Just now, MrWolf said: Looks good though! Thank you 2 Link to post Share on other sites More sharing options...
MrWolf Posted August 7, 2020 Share Posted August 7, 2020 You're welcome, I am enjoying seeing the layout and stock evolve. It's a genuine blend of art and engineering. 2 1 Link to post Share on other sites More sharing options...
Bluemonkey presents.... Posted August 8, 2020 Share Posted August 8, 2020 You may also find this inspirational; Great Western Wagons Plan Book, JH Russell. Be careful though I your hand and with your skills it could very very dangerous! 1 1 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now