RMweb Gold chuffinghell Posted March 25, 2021 Author RMweb Gold Share Posted March 25, 2021 (edited) 1 hour ago, Stubby47 said: I do like the window in the platform. It’s only because I had a round window in my bits box and didn’t know where else to put it Edited March 25, 2021 by chuffinghell 3 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 25, 2021 Author RMweb Gold Share Posted March 25, 2021 1 hour ago, Graham T said: I considered naming my layout Much Fettling, but on second thoughts will probably go with Chuffnell Regis Actually I quite like ‘Little Fettling’ or ‘Much Fettling’ as a layout name 1 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted March 25, 2021 RMweb Gold Share Posted March 25, 2021 I really liked Much Fettling, but decided to go down the Wodehouse route instead. Seems to fit the kind of feel I'd like to create with the layout, if at all possible... 2 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 25, 2021 Author RMweb Gold Share Posted March 25, 2021 (edited) 7 minutes ago, Graham T said: Wodehouse ...... isn't that an 80’s film staring patrick swayze? Edited March 25, 2021 by chuffinghell 3 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted March 25, 2021 RMweb Gold Share Posted March 25, 2021 boom boom tish! 2 Link to post Share on other sites More sharing options...
MrWolf Posted March 25, 2021 Share Posted March 25, 2021 Somebody say Boom Boom? 4 4 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted March 25, 2021 RMweb Gold Share Posted March 25, 2021 That looks jolly marvellous, Chris! 1 1 Link to post Share on other sites More sharing options...
snailpace Posted March 26, 2021 Share Posted March 26, 2021 So much for a snail pace. By now I wouldn’t have done anything at all, but I might have thought about doing something. But then again I might not. Perhaps I might have looked at what everyone else on RMWeb had achieved and been inspired, so Chris keep on at your pace and INSPIRE! I won’t ask how the canal towpath is going tho... that seems to be something I can keep up with.. Cheers, Mark 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 26, 2021 Author RMweb Gold Share Posted March 26, 2021 7 hours ago, snailpace said: So much for a snail pace. By now I wouldn’t have done anything at all, but I might have thought about doing something. But then again I might not. Perhaps I might have looked at what everyone else on RMWeb had achieved and been inspired, so Chris keep on at your pace and INSPIRE! I won’t ask how the canal towpath is going tho... that seems to be something I can keep up with.. Cheers, Mark Thanks Mark I only describe what I do as a snails pace because I do tend to work slower than some I tend to have a busy week and then a fortnight doing very little. I only did the towpath area under the bridge so I get the bridge and road in place as I’m working from the back of the layout to the front. The canal and the towpath will probably be the last thing I do Link to post Share on other sites More sharing options...
RMweb Premium MAP66 Posted March 26, 2021 RMweb Premium Share Posted March 26, 2021 13 hours ago, chuffinghell said: Yes that’s true but it’s going to take a little longer using that crane to lift the roof assembly into place Careful Chris, make sure you have a lift plan in place and I wouldn't recommend the lift if wind speeds are over 12mph in your area. Perhaps the hand of God could assist while no ones looking 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 26, 2021 Author RMweb Gold Share Posted March 26, 2021 12 minutes ago, MAP66 said: Careful Chris, make sure you have a lift plan in place and I wouldn't recommend the lift if wind speeds are over 12mph in your area. Perhaps the hand of God could assist while no ones looking The same 12mph wind blew the method statement and risk assessment out of the crane operators hands 2 8 Link to post Share on other sites More sharing options...
RMweb Premium Gedward Posted March 26, 2021 RMweb Premium Share Posted March 26, 2021 6 hours ago, chuffinghell said: The canal and the towpath will probably be the last thing I do Me too. 1 Link to post Share on other sites More sharing options...
MrWolf Posted March 26, 2021 Share Posted March 26, 2021 The conversation usually goes like this: Safety manager: "There's clearly no other way to do it without stopping production for a couple of days?" Fitter: "No, and you'll need a 400tonne crane because of the reach..." Safety manager: "How long will it take to do it your way?" Fitter: "Twenty minutes." Safety manager: "Okay, I'm going out for lunch, I won't be back for an hour or so..." 1 6 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 26, 2021 Author RMweb Gold Share Posted March 26, 2021 After a second coat of the base colour I’ve started on the detailing I shouldn’t really need to do the far side because it will never be seen, however you know I’ll do it anyway 15 Link to post Share on other sites More sharing options...
KNP Posted March 26, 2021 Share Posted March 26, 2021 5 hours ago, chuffinghell said: The same 12mph wind blew the method statement and risk assessment out of the crane operators hands That's where it came from. Landed by the chaps unloading the crate which has thrown them into even more confusion.....! 4 Link to post Share on other sites More sharing options...
KNP Posted March 26, 2021 Share Posted March 26, 2021 24 minutes ago, chuffinghell said: After a second coat of the base colour I’ve started on the detailing I shouldn’t really need to do the far side because it will never be seen, however you know I’ll do it anyway Yes, I thought that in the early days of Little Muddle then along came mobile phones, compact cameras and long reach tripods........so it will be seen!!!!! 2 3 Link to post Share on other sites More sharing options...
Indomitable026 Posted March 26, 2021 Share Posted March 26, 2021 6 hours ago, chuffinghell said: The same 12mph wind blew the method statement and risk assessment out of the crane operators hands You can’t go for a crap without a piece of paper these days... 2 1 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted March 26, 2021 RMweb Gold Share Posted March 26, 2021 29 minutes ago, Indomitable026 said: You can’t go for a crap without a piece of paper these days... Well it's always nice to have some to hand, I find... 1 1 5 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 26, 2021 Author RMweb Gold Share Posted March 26, 2021 (edited) 1 hour ago, KNP said: Yes, I thought that in the early days of Little Muddle then along came mobile phones, compact cameras and long reach tripods........so it will be seen!!!!! I’d not thought about it that way so I’ve now done the back and ‘unseen’ side Edited March 26, 2021 by chuffinghell Smelling correction 13 1 Link to post Share on other sites More sharing options...
MrWolf Posted March 26, 2021 Share Posted March 26, 2021 3 hours ago, KNP said: Yes, I thought that in the early days of Little Muddle then along came mobile phones, compact cameras and long reach tripods........so it will be seen!!!!! Two of the major buildings on my layout stand about six inches from the backscene. I was going to leave the rear walls blank until I saw the way you had photographed Little Muddle and I realised that I would soon regret not modelling everything! 4 1 Link to post Share on other sites More sharing options...
RMweb Gold 57xx Posted March 26, 2021 RMweb Gold Share Posted March 26, 2021 I like that the rough surface from the 3D print actually works well here, giving the stones some texture. 2 2 Link to post Share on other sites More sharing options...
MrWolf Posted March 26, 2021 Share Posted March 26, 2021 Me too. It was something that I didn't find convincing about the otherwise excellent Ratio goods shed. The stone blocks were large, sharply defined and very smooth. It all looked a bit too Christopher Wren for a railway goods shed, especially when compared to the GWR station building they did. I turned mine into a sort of homespun Will's Craftsman kit inspired by Faringdon. It's a shame that it's doubtless prohibitively expensive for Ratio to issue the same building in timber (very Brunelian broad gauge) or in English bond brick. They would be great seller's I suspect, as would a plastic kit for Watlington shed (Bachmann did a run of resin ones IIRC) Link to post Share on other sites More sharing options...
snailpace Posted March 26, 2021 Share Posted March 26, 2021 Chris, Whilst trawling through my stash of GWRJs in search of a photo I am sure I have seen but now cannot find (a bit like the thingummy needed to finish any model, searched for, not found, purchased and then surprise surprise you’ve got two of them), I happened across GWR drawings of the plan of Aldermaston goods shed and its internal 2 ton crane, almost identical to yours..... have you seen them? I haven’t compared your model to the drawings, but they do look nearly identical...... Link to post Share on other sites More sharing options...
RMweb Gold lezz01 Posted March 27, 2021 RMweb Gold Share Posted March 27, 2021 It isn't very hard to put a bit of texture on to a smooth plastic surface guys. Just flood the area with solvent, MEK, butanone or plastic weld, yes I know they are the same thing really, then bounce a stiff 1/2" or 1" paintbrush on it for a while and repeat as often as it takes to get the effect you want. Just bounce it end on mind don't let it drag. Use a cheap brush and cut it down to make it stiffer if you feel the need. It will work, trust me, I've done it many times. Regards Lez. 6 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted March 27, 2021 Author RMweb Gold Share Posted March 27, 2021 10 hours ago, snailpace said: Chris, Whilst trawling through my stash of GWRJs in search of a photo I am sure I have seen but now cannot find (a bit like the thingummy needed to finish any model, searched for, not found, purchased and then surprise surprise you’ve got two of them), I happened across GWR drawings of the plan of Aldermaston goods shed and its internal 2 ton crane, almost identical to yours..... have you seen them? I haven’t compared your model to the drawings, but they do look nearly identical...... The internal hoist was based on images of an Appleby Brothers hoist I found on t’inerweb 12 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now