MrWolf Posted June 17, 2021 Share Posted June 17, 2021 Splendid bit of cheating. Wotisit? 1 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 17, 2021 Author RMweb Gold Share Posted June 17, 2021 34 minutes ago, MrWolf said: Wotisit? It’s a thingy 1 2 Link to post Share on other sites More sharing options...
MrWolf Posted June 17, 2021 Share Posted June 17, 2021 (edited) A coal staithe thingy perchance? With a considerable saving over buying and modifying the admittedly rather nice Bachmann sleeper fencing. Plus it's your design. https://www.ebay.co.uk/itm/Bachmann-44-595-OO-Gauge-Sleeper-Built-Fencing-/133525899666?_trksid=p2349624.m46890.l6249 Interesting to look at the paint / weathering though. Good job. Edited June 17, 2021 by MrWolf 2 1 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted June 17, 2021 RMweb Gold Share Posted June 17, 2021 1 hour ago, chuffinghell said: More cheating I'm not sure where the cheating comes in. If you have used a tool to create something that you can use for your modelling, how can that involve cheating? Or have you copied something created by somebody else, something that I have never seen as a model? A bit puzzled, I am. 8 Link to post Share on other sites More sharing options...
MrWolf Posted June 17, 2021 Share Posted June 17, 2021 Agreed. I don't even think that a plastic kit is "cheating", making a convincing job of assembling, painting, weathering one is still model making. Even repainting / weathering an RTP item involves complex observational and practical skills and takes it to a totally different level. 6 Link to post Share on other sites More sharing options...
Fishplate Posted June 18, 2021 Share Posted June 18, 2021 Very nice Chris @chuffinghell. Looking forward to the inevitable debate on which way round it needs to go next to a siding. . . . Tall side? Or open side? Discuss, show your working out and add your reasons. Rule1 may not be applicable. . . . . 3 5 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 They don't go next to the siding at all, either way round. Coal was loaded from a wagon straight into bags on a lorry parked alongside, or was dumped on the yard floor and manhandled across to the coal merchant's area, where he might have staithes to segregate different grades of coal. 4 4 Link to post Share on other sites More sharing options...
RMweb Premium Gedward Posted June 18, 2021 RMweb Premium Share Posted June 18, 2021 (edited) 8 hours ago, MrWolf said: Splendid bit of cheating. There's just so much involved in building any layout. Some of it a joy, some of it a chore. Exactly why clubs do so well with allocating the right team for each task. But, when you're tasked with doing everything yourself, there's going to be stuff you really don't enjoy but do anyway. I didn't put my hand up for wiring and soldering, but I guess I'm doing it. Edited June 18, 2021 by Gedward Editing copy and typos 1 8 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 8 hours ago, Mick Bonwick said: I'm not sure where the cheating comes in. If you have used a tool to create something that you can use for your modelling, how can that involve cheating? Or have you copied something created by somebody else, something that I have never seen as a model? A bit puzzled, I am. Not copied as such other than looking at photos and other kits on the market then drawn my own I only use the term cheating because it’s not been scratch or kit built 1 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 8 hours ago, MrWolf said: With a considerable saving over buying and modifying the admittedly rather nice Bachmann sleeper fencing. It took 3 hrs to print and used about 50p worth of resin, although it took quite a while to draw it up 2 2 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 1 hour ago, Stubby47 said: They don't go next to the siding at all, either way round. Coal was loaded from a wagon straight into bags on a lorry parked alongside, or was dumped on the yard floor and manhandled across to the coal merchant's area, where he might have staithes to segregate different grades of coal. I may have to opt for rule one then 4 1 Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 10 minutes ago, chuffinghell said: it’s not been scratch or kit built Yes it has. You've just used different tools to do it. 11 1 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 If you have a dedicated coal-only siding, then you could probably add the staithes alongside the track. But alongside a 'general' siding would cause issues when wishing to manoeuvre other wagons. Either the coals would be in the way, or when moving the coals the others would be in the way. The only fixed unloading was for cattle, and they generally did have their own siding. But, Rule 1 definitely applies, and there are probably by-laws or local operating instructions which absolutely, unequivocally, back this up. 4 1 Link to post Share on other sites More sharing options...
RMweb Gold Nick C Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 26 minutes ago, Mick Bonwick said: Yes it has. You've just used different tools to do it. Agreed - you didn't buy it, you made it, from raw materials - that's scratchbuilding. The 3D printer is just a tool you used to help you, just the same as a craft knife or steel rule... 1 5 Link to post Share on other sites More sharing options...
RMweb Gold Stubby47 Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 57 minutes ago, Mick Bonwick said: Yes it has. You've just used different tools to do it. 30 minutes ago, Nick C said: Agreed - you didn't buy it, you made it, from raw materials - that's scratchbuilding. The 3D printer is just a tool you used to help you, just the same as a craft knife or steel rule... Yeah, we're all saying that, but we all know it's cheating really... 2 6 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 1 hour ago, Stubby47 said: If you have a dedicated coal-only siding, then you could probably add the staithes alongside the track. But alongside a 'general' siding would cause issues when wishing to manoeuvre other wagons. Either the coals would be in the way, or when moving the coals the others would be in the way. The only fixed unloading was for cattle, and they generally did have their own siding. But, Rule 1 definitely applies, and there are probably by-laws or local operating instructions which absolutely, unequivocally, back this up. This is what I thought of doing I've looked at reinstating the siding I removed, looks a bit tight though Link to post Share on other sites More sharing options...
RMweb Gold Graham T Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 I've no idea about prototypical working, but just by eye the first option looks better to me. As you say, putting that other siding in seems a bit of a squeeze... And vehicle access to both of the shorter sidings is compromised too by the look of it? 2 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 12 minutes ago, Graham T said: I've no idea about prototypical working Me neither...........which I have proven time and time again 1 4 Link to post Share on other sites More sharing options...
RMweb Gold Harlequin Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 (edited) I think the GWR would say, "Sorry, our yard at Warren is very small and there isn't enough room for you to operate out of it, Mr. Coal Merchant." Mr. Coal Merchant would set up his yard somewhere off the public road, nearby. Edited June 18, 2021 by Harlequin 1 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 16 minutes ago, Harlequin said: I think the GWR would say, "Sorry, our yard at Warren is very small and there isn't enough room for you to operate out of it, Mr. Coal Merchant." Mr. Coal Merchant would set up his yard somewhere off the public road, nearby. Even if the Coal Merchant is the brother of the GWR planning officer? 1 1 4 Link to post Share on other sites More sharing options...
woodenhead Posted June 18, 2021 Share Posted June 18, 2021 16 minutes ago, Harlequin said: I think the GWR would say, "Sorry, our yard at Warren is very small and there isn't enough room for you to operate out of it, Mr. Coal Merchant." Mr. Coal Merchant would set up his yard somewhere off the public road, nearby. And Mr C Merchant would also pay the GWR to extend that siding out of the yard, across the road into his new coal yard and might even buy himself a little Peckett to work the wagons from Warren and in his yard. Oh the wonders of Rule 1 1 2 1 Link to post Share on other sites More sharing options...
KNP Posted June 18, 2021 Share Posted June 18, 2021 Or are you just trying to cram to much in? Personally the first one looks best but without the coal merchants. 1 Link to post Share on other sites More sharing options...
RMweb Gold chuffinghell Posted June 18, 2021 Author RMweb Gold Share Posted June 18, 2021 (edited) 16 minutes ago, KNP said: Or are you just trying to cram to much in? Personally the first one looks best but without the coal merchants. Probably, I just liked the idea of another little building Originally I was going to put the coal merchants next to the weighbridge hut but it was mentioned that it had to be close to a siding I had also considered replacing the Y point and making sure there was vehicle access behind the goods shed, possible but a pain in the **** to take up the Y point Or maybe use it as a stand alone office for the goods shed? Edited June 18, 2021 by chuffinghell Link to post Share on other sites More sharing options...
RMweb Gold Nick C Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 Here's a couple of ideas, not sure if they would work with the geometry available though... Link to post Share on other sites More sharing options...
RMweb Gold Mick Bonwick Posted June 18, 2021 RMweb Gold Share Posted June 18, 2021 34 minutes ago, chuffinghell said: Probably, I just liked the idea of another little building Build a small diorama. 3 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now