4mm scale lights now in shops

[Marty Mc]

Hi

 

Just to let you know Bromsgrove models are now stocking DCC Concepts 4mm scale lights for locos and stations/yards.

 

4mm pre wired lights, for your Hornby/ Bachmann loco's. They are now available in White Red and for guards van white/red (lit both ends)

 

http://www.bromsgrovemodels.co.uk/pd674939331.htm?categoryId=28

 

Instructions for fitting them.

 

http://www.dccconcepts.com/index_files/DCC_loco_lamps.htm

 

 

 

 

 

The above photos were of the pre production samples and the lights now also have folding handles, the wire is pre thinned and 0.13mm enamel wire. 6 per pack plus 3 different resistor values so you can control the level of lighting you want.

 

While I am at it this is also a new product.

 

I think the pictures tell the story, follow the link to Bromsgrove for different colours and styles. The PCB has a "pot" for adjusting the brightness of the lights. Each light comes with an extension if you want to put it out in a yard. LEDs can also be added with up to 6 lights.

 

http://www.bromsgrovemodels.co.uk/pi822787775.htm?categoryId=33

 

 

AC/DC input up to 20v. Nice big terminals to solder on and small enough to be hidden in a small building.

 

 

 

I do not think DCC Concepts will be looking at a plug at this stage for the 4mm loco lamps, so you can remove the lamps, but you never know.

 

Disclaimer: I am a personal friend of Richard at DCC Concepts so I have no problem at all in promoting his products. I just see a disclaimer at the bottom sometimes so here is mine. At least you know!

 

Cheers

 

Martin