P.C.M Posted March 17, 2021 Share Posted March 17, 2021 2 hours ago, Andrew P said: Thanks for that Peter, If I keep it, I'm not even that worried by the name and Number. As for 33035, Yes I think subtlety is the way to go. The roof is shinny black, so that and the side grills will be my first port of call, along with the underbody area, then some gentle working along the side' It need some dirt in recesses and some streaking down as Ian said, so I will photograph as I go today. Nice pics from Campbell Road. No worries Andy, A Large Logo 37 wont look out of place with the class 33s there were quite a few 37s around Eastleigh during the 90s. First pic was taken at Northam the second shot St Denys. I did tke plenty off Campbell Road though. Cheers Peter. 1 Link to post Share on other sites More sharing options...
Popular Post Andrew P Posted March 17, 2021 Author Popular Post Share Posted March 17, 2021 After a little Gardening, and putting up New Bird Feeders for Her Indoors, a start was made on weathering the 33035 in NSE, the roof has had two colours added and 3 colours to the underframe, I am doing a Video to go with the process. The next stage will be to add white along the top with a brush and streak it down, and then add some more dirt into all the recesses, using paint and powders, then a final wipe down for a clean weathered look. I'm pleased the shinny plastic roof has gone, that was a Bonus. Ignore the speckled bits, they will go in the next phase. 21 Link to post Share on other sites More sharing options...
Mol_PMB Posted March 17, 2021 Share Posted March 17, 2021 10 hours ago, Andrew P said: I think your absolutely right Ian, after some work in the GARDEN I'm going to make a start on it. I also need to re watch you Videos on how you did the Turbots as I've never studied one at close quarters. Just out of interest, do you need to use a waterproof PVA to stick down the plants out in the garden? 2 Link to post Share on other sites More sharing options...
RMweb Premium Temeraire Posted March 17, 2021 RMweb Premium Share Posted March 17, 2021 3 hours ago, Andrew P said: After a little Gardening, and putting up New Bird Feeders for Her Indoors, Can she not use a Knife and fork then?? 4 Link to post Share on other sites More sharing options...
APT Fan Posted March 17, 2021 Share Posted March 17, 2021 On 16/03/2021 at 13:31, Andrew P said: So, Video 77 done a couple of weeks ago, its only 13 minutes, but I hope you enjoy it. The takaway of that Dapol 08 is very smooth and it crawls along very nicely. I notice that it is displaying all six lights, the so called 'shunting' mode. What other lighting modes does it offer? There is something a little steam-esk about an 08 shunter with its whistle and coupling rods. 1 1 Link to post Share on other sites More sharing options...
NSE DAZ Posted March 17, 2021 Share Posted March 17, 2021 Very nice Andy I have been following you on Facebook keep up the good work! Darren NSE DAZ 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 27 minutes ago, APT Fan said: The takaway of that Dapol 08 is very smooth and it crawls along very nicely. I notice that it is displaying all six lights, the so called 'shunting' mode. What other lighting modes does it offer? There is something a little steam-esk about an 08 shunter with its whistle and coupling rods. The 08 just has the 4 Shunting Lights, red and white at each end on a switchable Function, the then the direction light at the top on Function 0 as in most lights. I agree about them being almost Steam like in their take up and Toot's. Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 14 minutes ago, NSE DAZ said: Very nice Andy I have been following you on Facebook keep up the good work! Darren NSE DAZ Thanks Darren, good to see you looking in here as well, and glad your enjoying it. Link to post Share on other sites More sharing options...
APT Fan Posted March 17, 2021 Share Posted March 17, 2021 10 hours ago, Andrew P said: Been up to the top, and down to Porthmadog many time when staying at Bala, but never ridden the line. I love the whole of Snowdonia, and especially for my painting and going to the Mac Loop. Yeah I love Snowdonia, I'm normally a regular visitor so I'm really missing it at the moment. I've always wanted to go to the Mac Loop, but never got around to it. Its a shame you can't see the Tornado blasting through there pulling serious 'G's anymore. I worked on the Tornado or 'Tonka' as we used to know it for twelve years, a fantastic aircraft. I think that the last time I saw them flying might have been the final fly pasts see in the video below. Just to keep on topic, there is also a steam loco in the video! https://www.youtube.com/watch?v=k4xwOQ7hMr0 https://www.youtube.com/watch?v=ZLAHWCTygrE 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 6 minutes ago, APT Fan said: Yeah I love Snowdonia, I'm normally a regular visitor so I'm really missing it at the moment. I've always wanted to go to the Mac Loop, but never got around to it. Its a shame you can't see the Tornado blasting through there pulling serious 'G's anymore. I worked on the Tornado or 'Tonka' as we used to know it for twelve years, a fantastic aircraft. I think that the last time I saw them flying might have been the final fly pasts see in the video below. Just to keep on topic, there is also a steam loco in the video! https://www.youtube.com/watch?v=k4xwOQ7hMr0 https://www.youtube.com/watch?v=ZLAHWCTygrE Been up to the Mac Loop 5 times in the last 4 years that I've been to Bala and even after checking the times on the internet I have never seen a plane go through there. Seen loads over Bala Lake. I had met Julian Birley at Bala Lake Railway a few years ago, and he asked if I wanted a ride behind Alice as he had to test the Re Built Slate Wagons, I rode in the Yellow Directors Saloon and felt every sleeper. 5 Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 A couple of pics from this afternoon, I still have a lot to do, such as the end and tidy up around the Grill. Remembering how the roof was. You can see how the dirt has stayed in the door frame and around the hinges, which make them more pronounced. It will have a final blow over to tone it down some more once the small details are finished. 12 2 3 Link to post Share on other sites More sharing options...
RMweb Gold Adrian Stevenson Posted March 17, 2021 RMweb Gold Share Posted March 17, 2021 Hi Andy, that looks much better now. Nice job. Cheers, Ade. 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 12 minutes ago, Adrian Stevenson said: Hi Andy, that looks much better now. Nice job. Cheers, Ade. Cheers Ade, It should look a lot better once its finished, well that's the plan anyway, haha. 1 Link to post Share on other sites More sharing options...
47606odin Posted March 17, 2021 Share Posted March 17, 2021 That looks much better 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 17, 2021 Author Share Posted March 17, 2021 Just now, 47606odin said: That looks much better Cheers Ian, I kept doing it to dark and then having to wipe off and start again, I prefer to do heavy weathering, haha, far easier. Link to post Share on other sites More sharing options...
47606odin Posted March 17, 2021 Share Posted March 17, 2021 23 minutes ago, Andrew P said: Cheers Ian, I kept doing it to dark and then having to wipe off and start again, I prefer to do heavy weathering, haha, far easier. with the body lines, wiping it off again leaves the dirt where it naturally collects, against the mouldings around the windscreen and vents etc. a much more natural look 2 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 18, 2021 Author Share Posted March 18, 2021 (edited) Bench Road, with 37206 and 33012 waiting for the call to Duty. Edited March 18, 2021 by Andrew P 11 Link to post Share on other sites More sharing options...
Winslow Boy Posted March 18, 2021 Share Posted March 18, 2021 9 hours ago, Andrew P said: A couple of pics from this afternoon, I still have a lot to do, such as the end and tidy up around the Grill. Remembering how the roof was. You can see how the dirt has stayed in the door frame and around the hinges, which make them more pronounced. It will have a final blow over to tone it down some more once the small details are finished. Much better. Just how I remembered them back in the good old days. 1 1 Link to post Share on other sites More sharing options...
georgeT Posted March 18, 2021 Share Posted March 18, 2021 9 hours ago, Andrew P said: A couple of pics from this afternoon, I still have a lot to do, such as the end and tidy up around the Grill. Remembering how the roof was. You can see how the dirt has stayed in the door frame and around the hinges, which make them more pronounced. It will have a final blow over to tone it down some more once the small details are finished. Hi Bodger, What a big difference a coat of S**te makes, (Hahahaha) looks so much better and more realistic, and fit's in lovely with the rest... 1 1 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 18, 2021 Author Share Posted March 18, 2021 8 minutes ago, Winslow Boy said: Much better. Just how I remembered them back in the good old days. 1 minute ago, georgeT said: Hi Bodger, What a big difference a coat of S**te makes, (Hahahaha) looks so much better and more realistic, and fit's in lovely with the rest... Cheers Guys, getting there slowly. 1 Link to post Share on other sites More sharing options...
David Bell Posted March 18, 2021 Share Posted March 18, 2021 You are a menace Mr P! Your video of the Bala Lake Hunslet prompted me to go rummaging in the loft to retrieve a part built Slaters 16mm Quarry Hunslet which I started in the nineties then abandoned for some reason. Of course now I am looking at it and thinking I should finish it. Over 20 years for one kit is a bit ridiculous even for me! And even worse, I did not need glasses the last time I looked at this. Great video Cheers David 9 1 Link to post Share on other sites More sharing options...
Andrew P Posted March 18, 2021 Author Share Posted March 18, 2021 1 hour ago, David Bell said: You are a menace Mr P! Your video of the Bala Lake Hunslet prompted me to go rummaging in the loft to retrieve a part built Slaters 16mm Quarry Hunslet which I started in the nineties then abandoned for some reason. Of course now I am looking at it and thinking I should finish it. Over 20 years for one kit is a bit ridiculous even for me! And even worse, I did not need glasses the last time I looked at this. Great video Cheers David Wow, what a little beauty. Keep going and get it running, you know you want to. Link to post Share on other sites More sharing options...
tender Posted March 18, 2021 Share Posted March 18, 2021 1 hour ago, David Bell said: You are a menace Mr P! Your video of the Bala Lake Hunslet prompted me to go rummaging in the loft to retrieve a part built Slaters 16mm Quarry Hunslet which I started in the nineties then abandoned for some reason. Of course now I am looking at it and thinking I should finish it. Over 20 years for one kit is a bit ridiculous even for me! And even worse, I did not need glasses the last time I looked at this. Great video Cheers David I have one of these too, the chassis is complete and primed ready for a top coat but the body is yet to be started. 3 Dinorwig slate wagons are more or less complete. Theres a 5" Gauge version also sitting on the workshop floor waiting for lockdown restrictions to be lifted so we can get across to the Llandudno track for a steam up. Ray. 6 Link to post Share on other sites More sharing options...
pwr Posted March 18, 2021 Share Posted March 18, 2021 1 hour ago, David Bell said: You are a menace Mr P! Your video of the Bala Lake Hunslet prompted me to go rummaging in the loft to retrieve a part built Slaters 16mm Quarry Hunslet which I started in the nineties then abandoned for some reason. Of course now I am looking at it and thinking I should finish it. Over 20 years for one kit is a bit ridiculous even for me! And even worse, I did not need glasses the last time I looked at this. Great video Cheers David Took me 14 years to build my B2 on and off. My problem is a start something and put it down for some reason and go on to something else!. My BSK in blue grey was started in 2014 and put aside whilst I struggled with lining. I've now got transfers for that but when I picked it up recently I found the roof had bowed. Still considering what to do. I think I will finish the body off as far as I can then look at the roof. I am sure Shawn at Easy build will send me a spare if I discuss the problem with him. Given how much they cost and you still have to provide paint and transfers you can see why the Dapol/Lionheart MK 1's are a better bet at the prices that they seem to be available at. Paul R 1 Link to post Share on other sites More sharing options...
RMweb Gold Joner Posted March 18, 2021 RMweb Gold Share Posted March 18, 2021 I can take my sunglasses off now, looking at that 33 gave me an headache Looking a lot better now Mr P. I like your change of direction. Always fond of the Dutch livery. Paul 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now