gismorail Posted January 26, 2019 Share Posted January 26, 2019 I was only joking please carry on ..... Link to post Share on other sites More sharing options...
Andrew P Posted January 26, 2019 Share Posted January 26, 2019 Post away, its all tuition and looking VERY good Tom, great start mate. Link to post Share on other sites More sharing options...
RMweb Premium AdeMoore Posted January 26, 2019 RMweb Premium Share Posted January 26, 2019 Nice work Tom looking forward to the final result. Cheers Link to post Share on other sites More sharing options...
kandc_au Posted January 27, 2019 Share Posted January 27, 2019 It's the base layer Martin as I mention in the write up, most wont be seen. 50770260_10156350022172984_94146821294653440_n.jpg It's probably best I don't post further photos until it's finished. No, No, No....keep posting photo's. That is how we all learn! Please!!! Khris Link to post Share on other sites More sharing options...
kandc_au Posted January 27, 2019 Share Posted January 27, 2019 T The fullersite that Penrhyn quarries produced was bagged. There is a bit of info here courtesy of PGH; https://www.rmweb.co.uk/community/index.php?/topic/133709-penrhyn-railway-wagons-in-78-scale/?p=3146742 Andy Thanks Andy!Pity you cannot select more than 1 rating.It is both informative and a Thank you. khris 1 Link to post Share on other sites More sharing options...
RMweb Premium MPR Posted January 27, 2019 RMweb Premium Share Posted January 27, 2019 (edited) Hi Tom This is fabulous stuff, it's great to be able to watch the next stages in the evolution of Cwm Prysor. The standard that you have achieved in your scenic work so far has been so convincing in no small part due to its sheer consistency - even in its unfinished state the overall mood is extremely evocative. I can understand that applying the first areas of grass will temporarily disrupt that uniformity, but keep the faith and keep posting, this is going to raise the layout to another level entirely! Best Wishes Martin Edited February 1, 2019 by MPR 1 Link to post Share on other sites More sharing options...
Pteremy Posted January 27, 2019 Share Posted January 27, 2019 I think that the theory behind the base layer is that it corresponds to the main growing (often clump) part of the grass as opposed to the taller flower/seed spikes. The colour contrast will vary throughout the year. So in June/July as the the taller seed spikes develop, they will change from unripe green, often developing a purple tinge as they ripen, through to golden when fully ripe. By Autumn (which I think is what you want) the contrast is 'living green' and the yellow/straw of the taller by now dead seed heads. Link to post Share on other sites More sharing options...
steaming_chris Posted January 27, 2019 Share Posted January 27, 2019 Hello You may have mentioned this before, but what have you used as your substrate to the landscaping ? As a compliment, I like the photos of the bare scapes you have posted, though I don't know much of the area you're modeling, I do like the openness. Regards 1 Link to post Share on other sites More sharing options...
Tom F Posted January 27, 2019 Author Share Posted January 27, 2019 Hello You may have mentioned this before, but what have you used as your substrate to the landscaping ? As a compliment, I like the photos of the bare scapes you have posted, though I don't know much of the area you're modeling, I do like the openness. Regards Hi Chris I used industrial polystyrene which was glued together where the height was needed, then swapped with polystyrene cutter (available from Hobbycraft and produced by Woodland Scenics) before covering in Mod rock. Hope that helps. Cheers Link to post Share on other sites More sharing options...
steaming_chris Posted January 27, 2019 Share Posted January 27, 2019 Thank you very much, great explanation. Keep up the good work Regards Link to post Share on other sites More sharing options...
Popular Post Tom F Posted February 1, 2019 Author Popular Post Share Posted February 1, 2019 5810 approaches Cwm Prysor with the 9.15am from Blaenau Ffestiniog (plus an exLNER Van). Yes.... I've been busy! 28 3 10 Link to post Share on other sites More sharing options...
Andrew P Posted February 1, 2019 Share Posted February 1, 2019 Good work, just need some Sheep now to mow the meadow, haha 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted February 2, 2019 RMweb Gold Share Posted February 2, 2019 Did someone mention Sheep? 6 Link to post Share on other sites More sharing options...
westerner Posted February 2, 2019 Share Posted February 2, 2019 Good to see the first seeds have been sown. 4 1 Link to post Share on other sites More sharing options...
Popular Post Tom F Posted February 2, 2019 Author Popular Post Share Posted February 2, 2019 (edited) 5774 passes Cwm Prysor with the Pengwern Goods (5.55am off Ruabon), destined for Blaenau Ffestiniog. The layout is now fully grassed. Edited February 2, 2019 by 9793 34 13 Link to post Share on other sites More sharing options...
1722 Posted February 2, 2019 Share Posted February 2, 2019 2 hours ago, 9793 said: 5774 passes Cwm Prysor with the Pengwern Goods (5.55am off Ruabon), destined for Blaenau Ffestiniog. The layout is now fully grassed. And fantastic it looks for it (and it looked pretty damned decent before)! Excellent work, Tom. Inspirational. 3 3 1 Link to post Share on other sites More sharing options...
RMweb Premium Kylestrome Posted February 2, 2019 RMweb Premium Share Posted February 2, 2019 (edited) 7 hours ago, NHY 581 said: Did someone mention Sheep? It looks like nature's lawnmowers have already done their job but I'm sure that it will grow a bit given time It's nice to see the difference a bit of greenery makes! David Edited February 2, 2019 by Kylestrome 1 1 Link to post Share on other sites More sharing options...
dseagull Posted February 2, 2019 Share Posted February 2, 2019 Looks superb Tom. The greenery really sets off the subtlety in the weathering of the rolling stock, and the ballasting is as good as any I've seen. 2 1 Link to post Share on other sites More sharing options...
Tom F Posted February 2, 2019 Author Share Posted February 2, 2019 (edited) 22 minutes ago, dseagull said: Looks superb Tom. The greenery really sets off the subtlety in the weathering of the rolling stock, and the ballasting is as good as any I've seen. Thanks dseagull! I can finally breath a huge sigh of relief, as I was rather nervous how it might have ended up! I'm not planning to do the top layer yet, there are few more things to work out (some dry stone walling). The crossing keepers cottage will be arriving in the next couple of months, which will really bring the place to life! I became a little emotional earlier standing back and looking at the layout in all it's greenery. I began planning modelling this part of the world, four and half years ago. I didn't feel in a great place, I'd been treated pretty badly by a couple of people in the hobby and wanted to do something different from what I'd done previously (North Eastern/exLNER). After a rocky road with its ups and downs....things are finally coming together. My only wish.......that Dad could have been here to see this. Edited February 2, 2019 by 9793 1 14 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted February 2, 2019 RMweb Gold Share Posted February 2, 2019 Tom, your skill in creating lovely understated faithful recreations of your chosen prototype has many admiring followers, including myself.......................No doubt your Dad would have been tremendously proud of you and your achievements. Rob 5 3 Link to post Share on other sites More sharing options...
Tom F Posted February 3, 2019 Author Share Posted February 3, 2019 12 hours ago, NHY 581 said: Tom, your skill in creating lovely understated faithful recreations of your chosen prototype has many admiring followers, including myself.......................No doubt your Dad would have been tremendously proud of you and your achievements. Rob That's very kind of you to say Rob, thank you! I'm having a break from the layout today, and enjoying a video on the Cambrian Coast line! Next stage I've decided, is drilling the holes for the ratio fence posts. I figure now is the time before I add the next layer of grass! My thoughts are drill the holes, then stick cocktail sticks in the said holes whileI do further grassing. Once grassed further, I can remove the cocktail sticks and insert the fence posts. The other option is insert the fece posts now and try to mask each one off....but that could be tricky! Thoughts? Also, what is the scale distance in 4mm between GWR fence posts? 1 Link to post Share on other sites More sharing options...
RMweb Gold NHY 581 Posted February 3, 2019 RMweb Gold Share Posted February 3, 2019 Yes Tom. I have previously used the 'stick in hole' method. It works fine. Rob. 1 2 Link to post Share on other sites More sharing options...
sigtech Posted February 3, 2019 Share Posted February 3, 2019 Hello Tom, first things,- I think your layout is fantastic, and your locos and rolling stock are brilliant! The depth to which you go in your quest for accuracy is amazing and I have been following your progress here for some time. I think GWR fenceposts were nomally positioned 6' apart, so say 1" in 00, - at least thats how I have modelled them on my little loft layout 'Sproston'. Keep up the good work, I'm sure your Father would have been very impressed by your efforts! Kind Regards, Steve. 1 Link to post Share on other sites More sharing options...
RMweb Premium AdeMoore Posted February 3, 2019 RMweb Premium Share Posted February 3, 2019 9 hours ago, 9793 said: Also, what is the scale distance in 4mm between GWR fence posts? Tom looks like Steve is right https://www.scalefour.org/forum/viewtopic.php?t=1729 24mm for 6ft spacings is an inch the same in old money ;) Cheers 1 Link to post Share on other sites More sharing options...
Tom F Posted February 3, 2019 Author Share Posted February 3, 2019 (edited) 9 hours ago, sigtech said: Hello Tom, first things,- I think your layout is fantastic, and your locos and rolling stock are brilliant! The depth to which you go in your quest for accuracy is amazing and I have been following your progress here for some time. I think GWR fenceposts were nomally positioned 6' apart, so say 1" in 00, - at least thats how I have modelled them on my little loft layout 'Sproston'. Keep up the good work, I'm sure your Father would have been very impressed by your efforts! Kind Regards, Steve. 40 minutes ago, AdeMoore said: Tom looks like Steve is right https://www.scalefour.org/forum/viewtopic.php?t=1729 24mm for 6ft spacings is an inch the same in old money Cheers Thanks Steve and Ade! Well, that's that settled then! 1 inch between posts! Today has given me a headache, making some adjustments to the plans of the layout extension.... essentially I'm not doing Capel Celyn halt any longer. Why? Well, a friend pointed out that Arenig was the passing place between Cwm Prysor and Bala. As I'm not modelling Arenig, the lack of passing place was going to cause problems operating the layout to the WTT. So I've come up with an alternative. We will have an off scene holding loop, allowing two trains to pass....plus to be held to help give a feeling of distance between Bala and Cwm Prysor. The railway will then emerge into open countryside that leads directly into Bala. This will also allow the signals to be depicted on the approach to Bala. Edited February 3, 2019 by 9793 2 1 Link to post Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now