Converting a 8 pin Wired DCC Decoder to 6 Pin wiring question

[Paul80]

Hi

 

I have a small Zimo MX616 wired to 8 pin decoder I would like to convert to 6 pin but need a little help

 

Obviously  Orange goes to Pin 1, Grey goes to Pin 2, Red goes to pin 3, black to pin 4, white goes to pin 5 and yellow goes to pin 6 but were does the blue common positive go, I assume it must just connect to one of the others but which one and is my assumption correct.

 

Thanks 

 

[trevora]

Hi

 

I have a small Zimo MX616 wired to 8 pin decoder I would like to convert to 6 pin but need a little help

 

Obviously  Orange goes to Pin 1, Grey goes to Pin 2, Red goes to pin 3, black to pin 4, white goes to pin 5 and yellow goes to pin 6 but were does the blue common positive go, I assume it must just connect to one of the others but which one and is my assumption correct.

 

Thanks 

 

 

 

The Blue is NOT used white and yellow one side track the other (red or black not both)

trevora

[Paul80]

Ok, thanks, will give it a go tomorrow.