Jump to content

P2K Covered Hopper - 2 Bay


Recommended Posts

post-5303-0-91288600-1546716679_thumb.jpg

 

Another posting!

 

I’ve always enjoyed plastic kit building and the Proto2000 3 bay covered hopper has been a favourite because of it’s good quality.  However, it doesn’t seem to have been everyone’s favourite and I’ve collected a fair number of kits at very good prices.  However, at 12 number built and 4 remaining un-built, even I’d come to a limit on three bay hoppers, until I came across this example in one of the Morning Sun X Car volumes. 

 

Microscale Genstar container decals (although I’ve struggled for smaller lettering for the “cement” wording written below Genstar  – these are former Calaveras Cement Hoppers).  Straightforward cut and shut with minor mods to the kit pieces and angle reinforcement inside.  Needed a new roof from plasticard and I cut down Plano walkways to suit (the P2K kit walkway could also be cut to fit).   I utilised spare hopper hatches from a Detail Associated 2 Bay covered hopper kit - they need toning down having looked at the photo.  I’ve struggled to find these hopper hatches as a separate item – they use to be available as DA 6218.  Therefore I’m hoping the 9mm hole punch on order from eBay will allow me to progress the remaining 3 P2K kits into further 2 bay covered hoppers.

  • Like 3
Link to post
Share on other sites
  • 7 months later...

Some work in progress for the remaining three un-built kits

 

 

1103544736_SideCutsrev2.jpg.2c4053c2d041a3d8a9f3662ed831b60e.jpg

 

Side on view showing cuts and redundant bulkhead.  The left hand section has one less rib - this is the reason for cutting off the bulkhead.  I used a razor saw for the initial two cuts, and then used a sharp knife down the redundant rib to remove the bulkhead (and then filed the two pieces until I was happy with the new joint).

 

 

951357042_Sidecutstoprev2.jpg.c09c530a1891ecd195da5a7cbf2f94a8.jpg

 

A vertical view....

 

2056554298_Gluedsideonrev2.jpg.4584ab002b8fe26b68a271db83742420.jpg

 

First pass gluing together with equally spaced ribs.

 

1476973277_Internalviewrev2.jpg.735fdf5cf4d2f217724a53863babcf4e.jpg 

 

Internal view.  This time I fixed the ballast weight in first, before gluing in the angle reinforcements..........

 

 

 

 

2047963875_RoofandM4washersrev2.jpg.a0e480c64f094003d5400908a05a3bb1.jpg

 

I'm not sure how clear this picture is?  New roof from plasticard.  I used 1/4" tube on the first conversion which didn't work as well as I wanted (plus the Details Assoc access hatches have a curved profile to suit their curved roofs so I had problems getting them to sit level).  This time I've used 1/8" tube with an M4 washer.  I'm pleased with the hole punch off eBay and the new hatches are just slightly bigger than the washer, so I think they will look better than the first model.

 

Two of the models are painted and decal'd, and are ready for assembly (although that will probably take me another 4-6 weeks before they're finished). 

 

Foxy 

  • Like 3
Link to post
Share on other sites
  • 3 months later...

Further progress with second conversion - SOO 100150

 

725970628_SOO100150andGenstar1.jpg.4fbb16f0a881b94bdceb8991c0e63259.jpg

 

I'm pleased with the way the roof hatches have turned out using the hole punch.  I used the latches from the P2K kit for the latches for the new hatches.  I will probably lower the hatches on the first conversion I did (ie the Genstar) 

 

 

2060288649_SOO100150andGenstar2.jpg.5b4885ce41884ee10b436679f860e1fe.jpg

 

I didn't go a bundle on the weathering.  Bit on the roof, and a bit on the discharge hoppers.

 

 

1128236289_GenuineSOO100150P3.jpg.7bba0c1732d9bd4cd461b91f0be4d4b5.jpg

 

The inspiration.  Photo from the car window at Burlington WI, 8th Oct 99.  A poor photo of WC2057 was better than none, and years later I've also got a picture of a genuine PS 2 bay hopper conversion so it was a no-brainer.  I have a series of poor photos but when I look back through them now I've actually caught some interesting details within them.

 

Foxy

 

 

  • Like 1
  • Craftsmanship/clever 2
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.