RSS Fetcher Posted January 24, 2019 Share Posted January 24, 2019 Progress has been ongoing - albeit not well documented on my part! The LokPilot FX has arrived and has been wired in along side the LokSound and a Zimo speaker in each vehicle. I am using the 'Decoder Lock' feature of many decoders to program (this uses CV 15 & 16 to ensure only the selected decoder responds to programming commands). Zimo speaker in the trailer vehicle All of the lighting works as hoped in the motor vehicle, a bit bright but when it is all together this can be adjusted through the decoders. Internal and Leading Cab Light on BIL Lights on I have had to lengthen the toilet area to house the decoders as the roof is taken up by the lighting boards and the Pacers don't have a lot of hidden space with their large windows and open seating area. Lenthened toilet area with decoders and wiring visible before glazing is installed I have used thin wire between the two vehicles which mean it is now permanently coupled. Most of the remaining work is simple to do - Fitting NRN Radio pods, creating a floor for the motor area, adding head/tail lights and fitting a functional coupling to either end. Attached thumbnail(s) View the full article Link to post Share on other sites More sharing options...
Recommended Posts