Jump to content
 

Neuburg


JimFin
 Share

Recommended Posts

  • RMweb Premium

Well that was a bit of a chew but a 1200mm traverser module now complete with capacity for 1100mm trains over 6 tracks. Had to be designed to fit under the scenery and be demountable as it overlaps baseboard joints. Rebuilt the underframe of the centre baseboard so that the traverser turned through 90 degrees stows under the station for transporting. Track alignment is by bolts into 3d printed posts which also hold drop in protectors as tracks will be over free space when extended. Needed a ramp with 2 layers of cork to get the final alignment right but now running smoothly across all roads.

 

Put me somewhat behind plan, as has a couple of weeks looking after the grandchildren, out with Neuburg 1913 to Halifax show this weekend and then be able to progress with this. Undecided about the headshunt or running a line into the second traverser track yet but these would be easy enough to add later, just glad to have got this up an working.

 

 

IMG_20190925_115125036.jpg

  • Like 6
  • Craftsmanship/clever 2
Link to post
Share on other sites

  • 3 weeks later...

Jim I was admiring the 1913 version at halifax show the other week. Beautiful layout, I think my swiss hom might have to come out of retirement at some point for another layout after seeing your layout.im also contemplating a swiss standard gauge steam layout.

Link to post
Share on other sites

  • RMweb Premium

Glad you enjoyed it Simon, for me, it was a great weekend. I need to do a few maintenance jobs on 1913 as Halifax was the last show for it this year. A couple of sections of track at the baseboard joins need attention and as its all a learning curve, I have fitted a different design of protector for 2013 in transit and will retrofit that to 1913. The other "behind the scenes" item, I need to improve is the carry handles on the crates the layout is transported and stored in. 

 

Wish you all the best with Swiss steam traction - an interesting modelling project.

Link to post
Share on other sites

  • 4 weeks later...
  • RMweb Premium

Been able to make a start at terra forming (at last), seem to have been diverted to the traverser, rewiring, installing uncoupling ramps and setting up RocRail and WiFi. Happily time for some "proper" modelling. 

 

"Draft" of the platform and canopy.

IMG_20191108_192151864.jpg

 

Cement transfer facility.

IMG_20191108_214134613.jpg

 

General view of 1st baseboard.

IMG_20191108_214150686.jpg

Edited by JimFin
  • Like 7
Link to post
Share on other sites

Hi Jim,

Your layout is coming on nicely, can I ask on your post of last Saturday the large house above the bus with the flowers on the balcony, Is it a kit or a scratch build please? If its a kit would you mind advising its parentage.

Many thanks.

Craig.

Link to post
Share on other sites

  • RMweb Premium

Hi Craig - large chalet is scratch built, foamboard ground floor, scribed and stained balsa for the first and second floors, cardboard roof with Redutx tiles, balconies, windows and doors are 3d printed and stained balsa strip with foam and flock to create the flower effect. Its a "modernised duplicate of the version on the 1913 layout.

IMG_20170222_210814804_HDR.jpg

Edited by JimFin
  • Like 3
  • Craftsmanship/clever 2
Link to post
Share on other sites

  • RMweb Premium

Some more progress to share, 2 layers of plaster bandage and a skim with a plaster filler mixed with poster paints. Means that any little chips later on do not stick out like a sore thumb. Positioned the structures and temp backscene to check the overall look and quite satisfied. 

IMG_20191120_205702488.jpg.6d32e9b6f24a94d0b53b49ebc9549745.jpg

 

IMG_20191120_205806233.jpg.c818cee8d1e87173c50bcd23ae9b017c.jpg

 

The traverser dimension was just right for the ravine!

 

IMG_20191120_204058900.jpg.0727c51076bbe93d86a06a8682d4635d.jpg

 

 

  • Like 3
  • Craftsmanship/clever 1
Link to post
Share on other sites

  • RMweb Premium

And on with the rock face which many folk at exhibitions have asked about, to the extent I take an off cut of the Heki rock foil with me to let them touch and feel!

 

I buy it in large sheets, 800mm X 300mm, hold it against the face to be covered and use a sharpie to mark on the back a rough cut line. Cuts easily with domestic scissors, then held in place while a bead from a hot glue gun is applied along about 75mm of the edge of the scenery to be covered. I press it into place with an old engineers hammer which acts as a  heat sink to help the glue adhere, about 30 seconds. During this time the foil becomes very soft and can be moulded into shape with the hammer head. If you have not worked it out - DONT touch the foil during this process its really really hot.

 

Here is idea of the outcome, this has used most of 1 sheet in 2 parts.

 

 

IMG_20191125_214747382[1].jpg

IMG_20191125_212045687[1].jpg

  • Like 3
  • Informative/Useful 2
Link to post
Share on other sites

  • 2 weeks later...
  • RMweb Premium
On 25/11/2019 at 22:09, JimFin said:

If you have not worked it out - DONT touch the foil during this process its really really hot.

 

Well - that slowed progress :(

IMG_20191126_215242258[1].jpg

  • Like 1
Link to post
Share on other sites

  • RMweb Premium

Ravine is progressing well, given the theme of same but different from 1913 to 2013, changes are the pipeline for the hydro plant, viewing point for the hiking trail and base for the intended hikers suspension bridge.

IMG_20191208_213331571%5B1%5D.jpg.2366c8288f9f78ef782798477c611efa.jpg

 

Good find at Filisur in the retaining wall as I was wondering how to disguise a baseboard join.

 

67488806_Filisurretwallsplit.jpg.59a859d243f2a9e80fb080170ff037e4.jpg

 

IMG_20191208_213431833%5B1%5D.jpg.67be204ce9a6d5c468915f3447c80fdc.jpg

Edited by JimFin
  • Like 7
Link to post
Share on other sites

  • 4 weeks later...
  • RMweb Premium

Been able to make some progress having shaken off the festive cold! 

 

1515515397_IMG-20200105-WA00071.jpeg.b136a88cf7c4b188c7bd8d5201503cfa.jpeg

 

The footpath to the pedestrian bridge and on to the viewpoint is coming along nicely, can see a tree making session in my future.

 

308405811_IMG-20200105-WA00091.jpeg.ee1276a04e3076bbd2889d0285dd38be.jpeg

Edited by JimFin
  • Like 7
Link to post
Share on other sites

  • 2 weeks later...
  • RMweb Premium

Having been wrangling with centenary and overhead lines, I am now committed to staying in the steam era!

 

Given this is a sectional exhibition layout, anyone got tips for the overhead wire at the baseboard joins? Sommerfeldt posts and profi wire. (0.5mm)

  • Funny 1
Link to post
Share on other sites

  • RMweb Gold

I created a 180° hook on each end of the contact wire and just hooked them around the arm on the masts. 

wire on the left is the removable one. The top carrier wire just curves over at 90° to sit over the insulator. 
1BEA1B8C-A60A-4EEF-9568-4A3B1C16DB60.jpeg.280054340d6a4d3706213d55a8e684c6.jpeg
 

on the gantries I just kept the top wire straight. Right hand wire is removable. 

B071E192-CBE2-4CEA-81D1-19641385512C.jpeg.5f25f0039932b46a6c9fb0ec1999b2c2.jpeg

left hand wire here is the removable one. 

0FF04371-2E2F-4797-9A0F-76D868D010F7.jpeg.0382db4c7338007329ef385f45579ad8.jpeg

Link to post
Share on other sites

  • RMweb Gold

I’d also advocate something like this simplify cleaning under the wires, so easy but does need two locos to pull it on HOm!

CMX track cleaner simply screw on Bemo coach bogies :) 

7A66C2C4-B4DD-41A4-9B89-8CBEB97EF5F6.jpeg.4a731ec6b84f27a3c02aa5e44b208948.jpeg
 

I had to file out a little to allow the 12mm wheels to swing freely

B3249924-92E7-4113-9818-591312AA3AD6.jpeg.cc39403881b41ac1cba3cbdda379b3ac.jpeg

Link to post
Share on other sites

  • RMweb Premium

Many thanks Paul, I was thinking of something similar. Did you have a problem getting the span extensions onto the posts? I think I am going to have to file away about 1mm to get them to fit. Have to wait until a CMX comes up at a good price. Must admit, have not had a problem with dirty track since I saw a Liverpool MRC idea which I modified. Basically two sandwich bag clips that hold a strip of paper towel over the track at the fiddle yard which I soak with a few drops of cleaning alcohol. All wheels of every train that runs in or out get a clean.

 

Link to post
Share on other sites

  • RMweb Gold

I seem to vaguely remember they needed filing or de-burring to get the spans on, twelve years ago now! 
I picked up the smaller N gauge CMX for just £30 a couple of years ago so patience may be rewarded ;) 

 

Link to post
Share on other sites

  • 4 weeks later...
  • RMweb Premium

Well the electrification has progressed once I made some guides to set heights etc for the wires. What surprised me with the Sommerfeldt Profi wires is that I had to use a dremel to smooth the joins of the power wire and the droppers as pantographs were snagging on the joins. Advancing the station has been another job as it had to be done before gantries and wires restricted access. Still WIP but please with the way the lighting is working out.

 

 

IMG_20200208_213222797.jpg

IMG_20200208_213233293 (2).jpg

IMG_20200208_213255792.jpg

IMG_20200208_213330372.jpg

  • Like 5
Link to post
Share on other sites

  • RMweb Premium

This is how my height gauges for Sommerfeld work -

 

The base is slotted at 12mm so it clips onto the track and is set to 69mm being the height of the cross wire. Just taped on a bit of wire with a  90 degree vertical hook at the end. Slide the cross wire support down the post onto the wire and solder to the outside of the post. Remove jig and solder inside.

 

IMG_20200209_112818518.jpg.ec68dd530d7ae5d4c3f5c0e1cd8e7662.jpg

 

Top of the cross member is to be 100mm above the top of the track so the gauge is 93.3mm to the lower edge of the girder. Same process as before but making sure its at 90 degrees to the mast.

 

IMG_20200209_113234022.jpg.aa6a9ffa025f26946975f434458ff1aa.jpg

 

Files for these and a 67mm gauge to set the height of the conducter wire are attached if anyone wants to print their own. I could run off a couple of sets if folk wanted them for the cost of postage, I designed them for Peco track and Sommerfeldt RhB componenets - I doubt if they would be any use for anything else.

mast alignment tool (5).stl

  • Like 2
  • Informative/Useful 1
Link to post
Share on other sites

  • 2 weeks later...
  • RMweb Premium

Having finished the overhead knitting, the advice re track cleaning floated to the top of the pile but in the absence of a CMX cleaner becoming available, I read up on alternative and am giving a Sharge unit a go. (http://www.model-trainstrack-cleaner.co.uk/) Converted from HO by to HOm by using 2 spare Bemo coach bogies, fitting 7mm spacers and slightly longer bolts than supplied to preserve the ride height. Early days but seems to be doing the job so far.

IMG_20200222_220932623.jpg.caa8e65a4ce3c78e84e0b09ae463d36e.jpg

 

Edited by JimFin
  • Like 4
Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...