Jump to content

 

 

newbryford

And the winner is............. "Bryford"

Recommended Posts

Posted (edited)

I know my original plans were small and then turned a little larger, but after much sorting out [*], I've decided to make a start with a small project with a view to larger things in the future.

[*] Otherwise known as tidying out the garage, making room in it for some stuff from my shed and Mrs NB wanting her own shed.

 

By adopting UK Freemo standards, my plan is to build modules as and when time/space/money permits.

The initial space will be within my 10x8 model building shed, with an internal space of 9'6" x 7'6".

The first four modules will be 3'6" by 18", giving a 8'6"x7' L shape which can be arranged as a 14' straight layout if required.

 

First stage was to work out what sort of curve could be accommodated around the L and 2'6" looks to fit the bill.

 

I know that some folks like to use computer planning software, but I'm very much old school and drew out the initial setup on graph paper, and then moved up to some old wallpaper, cut into baseboard sizes for a 1:1 plan.

This is the first view of the curve, with my "helper" in the shape of #3 cat Benji - who doesn't look too pleased..................

 

plan1.jpg.55cd69ec7e6cf360c896170b73ea1202.jpg

 

 

The intention is to have a curve with a 90degree crossing (immediately under Benji's backside) leading to future extension in other directions - to the right and immediately below

The red spots are approximate Freemo markers for single/double track and baseboard widths of 18/20" to comply

 

I have already purchased the wood and currently have a flat pack to build more than four boards including one with a lowered mid-section with a  water crossing

 

There will be some more planning in the next few days.

 

Cheers,

Mick

 

 

 

 

 

Edited by newbryford
update
  • Like 8

Share this post


Link to post
Share on other sites

Does Benji’s arse count as a planning tool or just a weight? :laughclear:

So are you likely to get to one of the meets this year too? ;) 

  • Funny 2

Share this post


Link to post
Share on other sites
5 hours ago, PaulRhB said:

Does Benji’s arse count as a planning tool or just a weight? https://www.rmweb.co.uk/community/uploads/emoticons/default_laughclear.gif

So are you likely to get to one of the meets this year too? https://www.rmweb.co.uk/community/uploads/emoticons/default_wink3.gif 

 

I was hoping to get to Armitage in October, but it's the same weekend as GETS at Milton Keynes - where I will be working...…………...

 

Cheers,

Mick

Share this post


Link to post
Share on other sites

;) throw a sicky and wear a mask so no one knows when we post pics on here ;) Ah well you might have the module finished for the next one :) 

  • Like 1

Share this post


Link to post
Share on other sites

More thoughts on the name.

(Yes I know it's my layout and I can name it whatever I like)

 

I am sooooooooooo tempted to resurrect the "Bryford" name or variations of.

 

My other choices are "Billington". (Next village along from where I live)

 

and "Langmoor" which was a still-born OO idea.

 

Looking at names in the Georgia/South Carolina areas, there are numerous "fords, fields and dales" as suffixes.

 

So that gives:

Bryford

Brydale,

Bryfield, (similar to Brierfield in Lancashire)

Langdale (there's another north of England connection that will confuse folks!)

 

What do people think?

Cheers,

Mick

Share this post


Link to post
Share on other sites
27 minutes ago, newbryford said:

More thoughts on the name.

(Yes I know it's my layout and I can name it whatever I like)

 

I am sooooooooooo tempted to resurrect the "Bryford" name or variations of.

 

My other choices are "Billington". (Next village along from where I live)

 

and "Langmoor" which was a still-born OO idea.

 

Looking at names in the Georgia/South Carolina areas, there are numerous "fords, fields and dales" as suffixes.

 

So that gives:

Bryford

Brydale,

Bryfield, (similar to Brierfield in Lancashire)

Langdale (there's another north of England connection that will confuse folks!)

 

What do people think?

Cheers,

Mick

One vote for Langdale from me.

  • Thanks 1

Share this post


Link to post
Share on other sites

Bryford and Bryfield are my favourites as the dale suffix sounds too UK ;)

  • Thanks 1

Share this post


Link to post
Share on other sites

Bry County? If you'd admit to liking Bon Jovi.

 

I always liked Glendale Valley, which means "Valley Valley Valley".

  • Like 2

Share this post


Link to post
Share on other sites

Don’t you need to have min 36” radius curve for the mainline track to meet Freemo specs?

Share this post


Link to post
Share on other sites
4 minutes ago, Talltim said:

Don’t you need to have min 36” radius curve for the mainline track to meet Freemo specs?

 

Only for the main tracks....

Main tracks, or any other tracks designed to be used by through trains must have a minimum of 36” minimum radius curves and #6 turnouts. Spurs and industry tracks must be 24” minimum radius and can use sharper turnouts.

Share this post


Link to post
Share on other sites

Yep I certainly pushed that to the limit on Kipling foods with the two warehouse tracks ;) 

  • Like 1

Share this post


Link to post
Share on other sites
3 minutes ago, Talltim said:

Ok. Just wanted to make sure you were aware. 

 

The curve is intended to be the connection between Class1/2 and the shortline. The mainline is pretty much straight (so far)

 

Cheers,

Mick

 

p.s. the name will be decided by end of play tomorrow Tuesday

Edited by newbryford

Share this post


Link to post
Share on other sites
On 13/04/2019 at 12:44, PaulRhB said:

https://www.rmweb.co.uk/community/uploads/emoticons/default_wink3.gif throw a sicky and wear a mask so no one knows when we post pics on here https://www.rmweb.co.uk/community/uploads/emoticons/default_wink3.gif Ah well you might have the module finished for the next one :) 

 

Not that you would Mick, but I advise not to throw a sicky. I recall two instances of Midlands based Railwaymen who were caught out by TVC.  The first was an S&T telecomms engineer who practised Morris dancing as a hobby.  He apparently threw a sicky one bank holiday as he had a Morris Dancing gig in Weston Super Mare.  Well that 

Midlands based TV news channel ATV decided to do a teatime news feature on Brummies enjoying their bank holiday by the seaside, with a close up of the dancers thrashing the sticks and bells.

 

The other was a Controller who was passionate about a Southwest football team and wanted to watch the match.  Yes  You have guessed which match was being broadcast on the telly and who was seen in the crowd !!!!

 

Share this post


Link to post
Share on other sites

Only beaten by my American friend who took a sicky when I worked in Curry’s and promptly turned up on the local lunchtime news, across the store as they were all on bbc1, being interviewed at Sandbanks!!

We videoed the teatime version and played it on a projection tv for him ;) 

 

Share this post


Link to post
Share on other sites

And the winner is "Bryford"

 

Various connotations of Bryford Terminal, Bryford County and the like will be used for the various modules.

One of the industries will be Billington Engineering and it's likely that Langdale will make an appearance somewhere....

 

Cheers,

Mick

  • Like 5

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...